Fyne Audio F1-10S: 2-way floorstanding loudspeaker with a 250 mm IsoFlare driver
The F1-10S is a floorstander in the F1 range, developed from the earlier F1-10: the team headed by Dr Paul Mills redesigned the crossover and updated the 250 mm IsoFlare driver with the FyneFlute surround. Sold as a pair.
The cabinet has two cavities and a BassTrax port, and according to the data sheet the bass extends to 26 Hz. The IsoFlare unit incorporates a time-aligned compression tweeter with a 75 mm titanium dome, whose high-frequency response goes beyond 26 kHz. Its very high sensitivity makes it suitable for a broad choice of amplification, whether single-ended triode valve units or high-power solid-state models. Two potentiometers adjust high-frequency energy and presence, so that the output can be matched to the room and to the position of the speaker. Design, construction and hand finishing all take place at the Fyne Audio factory in the UK.
Key features
- 2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser
- IsoFlare point source driver of 250 mm with a FyneFlute surround and a multi-fibre cone for bass and midrange
- Compression tweeter with a 75 mm titanium alloy dome, neodymium magnet
- Frequency response 26 Hz - 26 kHz (-6 dB, typical in-room)
- Sensitivity 94 dB (2.83 V at 1 m), nominal impedance 8 Ohm
- Recommended amplifier power from 20 to 280 watts RMS
- Adjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)
Technical data
The crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 140 watts RMS continuous and 500 watts peak. Dimensions (height x width x depth) are 1191 x 405 x 581 mm and net weight is 57.7 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 108 mm and the SuperTrax position at 84 mm.
Finishes
The F1-10S is on sale in the Walnut Piano Gloss finish.