Aim the treble from the ceiling
CCM662 pairs a pivoting tweeter with an off-axis response control.
The Bowers & Wilkins CCM662 pair fits 202 mm cut-outs and needs 133 mm of free depth behind the ceiling. Each frame measures 240 mm across and projects by 4 mm. Check that clearance before deciding where the pair will go, particularly if the listening area is away from the speakers' vertical axes.
Key features
- Cut-out 202 mm; frame 240 mm; depth 133 mm.
- Drive units: 150 mm Aramid Fibre bass/midrange and 25 mm Nautilus aluminium tweeter.
- Impedance: 8 ohm, 4.5 ohm minimum; power: 25–150 W recommended.
- pivoting tweeter; three-position EQ; die-cast chassis; gold-plated terminals
Shaping coverage
The 25 mm Nautilus aluminium-dome tweeter pivots towards the audience. A three-position EQ switch provides a further adjustment to off-axis response. The 150 mm Aramid Fibre bass/midrange cone sits in a rigid die-cast chassis, and the terminals are gold plated. Compared with CCM663, the recommended upper amplifier power is 150 W rather than 130 W.
Figures for system planning
Nominal impedance is 8 ohms with a 4.5-ohm minimum, while sensitivity is 88 dB. The -6 dB range runs from 45 Hz to 50 kHz and recommended amplifier power spans 25 to 150 W. QuickDogs fixings and plug-and-play connection simplify fitting. A C6 pre-mount kit and 6C back box are specified; check the installation accessories alongside the available ceiling depth.
The higher 150 W recommended limit gives more power headroom than the 130 W variants while retaining the same 202 mm cut-out. For off-centre listening, the pivoting dome and EQ are two distinct adjustments: aim the tweeter towards the seats, then choose the EQ setting to suit the resulting geometry. This is particularly useful when the ceiling forces an asymmetric layout.