4K HDR video over IP transmitter for 1 Gb managed networks
The Blustream IP200UHD-TX is the transmitter of the IP200UHD multicast platform: it takes the signal from an HDMI source and places it on the network together with IR, RS-232, USB and audio.
Visually lossless compression keeps the delay at around one frame (16-33 ms depending on frame rate) and the signal covers 100 m on a single network cable. With a 1 Gb switch you can build distribution matrices and video walls of almost any size; with no switch the transmitter acts as a point-to-point or one-to-many extender. Power is drawn via PoE from the switch; where the switch cannot provide it, a local 24-56 V adapter is needed, available separately. It fits both professional and home installations.
Key features
- 4K HDR sources: 3840 x 2160 at 30 Hz and 4096 x 2160 at 24 Hz, both in 4:4:4, or 4K at 60 Hz in 4:2:0
- Bitstream multichannel surround audio, object-based formats included
- HDCP 2.2 and advanced EDID handling
- Stereo analogue audio can be embedded into the stream or extracted from it
- Audio, video, IR commands, RS-232 serial and USB/KVM each routed independently
- Four modes: matrix, video wall, one-to-one extender, one-to-many extender
- PoE draw of 6 W typical, 7.2 W maximum
Connections
HDMI type A input and an RJ45 output to the network. For audio there is an analogue input on a 3.5 mm jack and a pair of RCA outputs. Control runs through RS-232 on a 3-pole Phoenix terminal, USB type B for KVM, IR in on a stereo jack and IR out on a 3.5 mm mono jack; a micro-USB port handles firmware updates. It measures 190 x 114 x 25 mm and includes IR receiver and emitter, a serial Phoenix plug and a mounting kit.