ALIGN IT DS3 is an acrylic cartridge alignment protractor carrying three geometries, Baerwald, Löfgren B and Stevenson, and tracing the entire arc the arm follows between the two null points.
ALIGN IT DS3: three geometries compared
Unlike many protractors, this one draws the full travel of the arm from the outer null point to the inner one. The benefit is practical: once in place it stays put, the platter does not have to be turned each time you move between the points, and there is no risk of losing the position. Alignment becomes more comfortable for first-timers and for those who do it for a living.
You pick one of the three printed geometries according to how you listen. Baerwald is the balanced solution many start from. Löfgren B favours tracking across the central part of the record and gives the lowest average distortion. Stevenson favours the beginning and the last grooves of the side. The instructions explain how to carry out the adjustment and how to decide which geometry is the better fit.
The same tool handles overhang, azimuth and tangency. Its curves are drawn for 8.6, 9, 10 and 12 inch arms; the protractor fits every Pro-Ject turntable and many arms from other makers, as long as the distance from arm pivot to platter spindle corresponds.
Specifications
- Material: acrylic
- Thickness: 2 mm
- Printed geometries: Baerwald, Löfgren B, Stevenson
- Adjustments: overhang, azimuth and tangency
- Alignment arcs: for 8.6, 9, 10 and 12 inch arms
- Pivot-to-spindle distances: 200 mm, 212 mm, 238 mm and 291.6 mm
- In the box: detailed instructions and a guide to choosing the geometry
- Manufactured: Europe