{"title":"Diffusori Yamaha","description":"\u003cp\u003eScopri i \u003cstrong\u003ediffusori acustici Yamaha\u003c\/strong\u003e, progettati per offrire un suono equilibrato, dettagliato e coinvolgente. La gamma comprende modelli da scaffale, da pavimento, da incasso e per Home Cinema, ideali per musica, film e sistemi audio di ogni dimensione.\u003c\/p\u003e","products":[{"product_id":"yamaha-ns3000","title":"Yamaha NS-3000 Sinistra","description":"\u003ch2\u003eFlagship technologies in a two-way standmount speaker\u003c\/h2\u003e\n\n\u003cp\u003eNS-3000 is a Yamaha two-way speaker with a 16 cm woofer, ZYLON™ drive units, R.S. structure and a crossover using Mundorf components. It is sold individually — two units are required for a stereo pair.\u003c\/p\u003e\n\n\u003cp\u003eThe design transfers many solutions developed for NS-5000 into a standmount format. Woofer and tweeter use ZYLON™ for tonal continuity, while bracing, R.S. chambers and an acoustic absorber control cabinet and driver resonances. The crossover uses selected components and brass terminals to preserve the signal through to the drive units.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way system with 16 cm woofer.\u003c\/li\u003e\n  \u003cli\u003eWoofer and tweeter with ZYLON™-based diaphragms.\u003c\/li\u003e\n  \u003cli\u003eTweeter derived from the NS-5000 design.\u003c\/li\u003e\n  \u003cli\u003eR.S. (Resonance Suppression) structure behind the tweeter.\u003c\/li\u003e\n  \u003cli\u003eDedicated acoustic absorber to control standing waves.\u003c\/li\u003e\n  \u003cli\u003eCabinet developed using FEM analysis and laser measurements.\u003c\/li\u003e\n  \u003cli\u003eCrossover with Mundorf MCap® SUPREME EVO capacitor.\u003c\/li\u003e\n  \u003cli\u003eSold individually — two units are required for a stereo pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eZYLON™ drive units\u003c\/h3\u003e\n\u003cp\u003eWoofer and tweeter use ZYLON™ to maintain high propagation speed and a consistent tonal character between the two ways. Using the same base material reduces contrast between the low-mid and high-frequency ranges, making the transition around the crossover frequency less perceptible as a change of source.\u003c\/p\u003e\n\n\u003ch3\u003eTweeter and R.S. structure\u003c\/h3\u003e\n\u003cp\u003eThe tweeter derives from the NS-5000 design and uses an R.S. (Resonance Suppression) structure on its rear. The duct is designed to cancel resonance that can develop in the rear cavity of the diaphragm, preventing this energy from returning to the membrane and masking finer high-frequency nuances.\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic absorber\u003c\/h3\u003e\n\u003cp\u003eThe absorber dedicated to NS-3000 reduces standing waves inside the cabinet without filling the volume with large quantities of sound-absorbing material. Yamaha therefore aims to control internal colouration while keeping more signal energy intact, especially through transients and passages with large dynamic variation.\u003c\/p\u003e\n\n\u003ch3\u003eCabinet and bracing\u003c\/h3\u003e\n\u003cp\u003eThe position of the internal bracing is defined through FEM analysis and measurements with laser vibrometers. The design identifies points where cabinet surfaces store or release energy and intervenes selectively, reducing box ringing without indiscriminately stiffening the entire enclosure.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and terminals\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses selected components, including a Mundorf MCap® SUPREME EVO capacitor and a large woofer coil. Pure brass terminals provide secure tightening and complete an electrical path designed to limit losses between amplifier and loudspeaker drive units.\u003c\/p\u003e\n\n\u003ch3\u003eIndividual sale and stereo pairing\u003c\/h3\u003e\n\u003cp\u003eThis file refers to the unit intended for the left channel. NS-3000 is the same physical model for both channels: Yamaha sells it individually — two units are required for a complete stereo pair.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":42166138110141,"sku":"VAX7660","price":4499.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-3000-sinistra-7qwsk.jpg?v=1791988633"},{"product_id":"diffusori-con-stand-dedicati-yamaha-ns5000","title":"Yamaha NS-5000 Sinistra","description":"\u003ch2\u003eReference three-way design with ZYLON™ diaphragms and Japanese birch cabinet\u003c\/h2\u003e\n\n\u003cp\u003eNS-5000 is Yamaha's reference three-way standmount speaker, with a 30 cm woofer, ZYLON™ diaphragms and a Japanese white birch plywood cabinet. It is sold individually — two units are required for a stereo pair.\u003c\/p\u003e\n\n\u003cp\u003eThe design recalls the format of the NS-1000M but uses materials and resonance-control systems developed for contemporary reproduction. Tweeter, midrange and woofer share a PBO ZYLON™ diaphragm base, while R.S. ducts, acoustic absorbers and a high-quality crossover work to maintain uniform timbre and limit cabinet colouration.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-way system with 30 cm woofer.\u003c\/li\u003e\n  \u003cli\u003ePBO ZYLON™ fibre diaphragms coated with Monel alloy.\u003c\/li\u003e\n  \u003cli\u003eR.S. ducts to suppress resonances in the mid and high-frequency sections.\u003c\/li\u003e\n  \u003cli\u003eInternal acoustic absorbers with reduced use of sound-absorbing material.\u003c\/li\u003e\n  \u003cli\u003eLaminated Japanese white birch plywood cabinet from Hokkaido.\u003c\/li\u003e\n  \u003cli\u003ePiano Black finish applied to all six surfaces.\u003c\/li\u003e\n  \u003cli\u003eCrossover on 140 µm copper circuitry with Mundorf components.\u003c\/li\u003e\n  \u003cli\u003eProduct sold individually — two units are required for stereo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eZYLON™ and Monel diaphragms\u003c\/h3\u003e\n\u003cp\u003eTweeter, midrange and woofer use diaphragms based on PBO ZYLON™ fibre, a material with high propagation speed and good internal elasticity. The surface is deposition-coated with a Monel alloy developed by Yamaha, with the aim of maintaining uniform speed and tonal character across the full range.\u003c\/p\u003e\n\n\u003ch3\u003eR.S. ducts\u003c\/h3\u003e\n\u003cp\u003eR.S. (Resonance Suppression) ducts control resonances that form behind the mid and high-frequency drive units. The tube geometry acts on specific resonance modes without relying on large amounts of absorbent material, so fine signal nuances are not attenuated together with unwanted colouration.\u003c\/p\u003e\n\n\u003ch3\u003eJapanese birch cabinet\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is built from laminated white birch plywood sourced from Hokkaido and is reinforced to support the 30 cm woofer. The choice of material and bracing aims to control surface vibration without turning the cabinet into an inert mass disconnected from its overall acoustic behaviour.\u003c\/p\u003e\n\n\u003ch3\u003ePiano Black finish\u003c\/h3\u003e\n\u003cp\u003eAll six external surfaces receive a gloss black finish produced using painting and polishing processes linked to Yamaha grand-piano manufacture. The surface layer also increases cabinet rigidity and helps limit the small vibrations that can emerge during reproduction.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and components\u003c\/h3\u003e\n\u003cp\u003eThe frequency-dividing circuit is mounted on a double-sided board with 140 µm copper and uses short paths. Components include Mundorf MCap SUPREME EVO capacitors, MResist SUPREME attenuators and a 1.6 kg woofer coil, selected to reduce losses as the signal passes through the network.\u003c\/p\u003e\n\n\u003ch3\u003eIndividual sale and stereo pairing\u003c\/h3\u003e\n\u003cp\u003eThis file refers to the unit intended for the left channel. NS-5000 is the same physical model for both channels: Yamaha sells it individually — two units are required for a complete stereo pair.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":42166140534973,"sku":"VFU5170","price":7874.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-5000-sinistra-6klp7.jpg?v=1788782051"},{"product_id":"sintoamplificiatore-yamaha-av-rx-a8a","title":"Yamaha AV RX-A8A","description":"\u003ch2\u003eReference AVENTAGE for large-scale home cinema\u003c\/h2\u003e\n\n\u003cp\u003eRX-A8A is Yamaha's 11.2-channel AVENTAGE AV receiver for advanced home cinema systems, with immersive processing, next-generation HDMI and YPAO™ calibration.\u003c\/p\u003e\n\n\u003cp\u003eThe AVENTAGE design combines multichannel amplification, a reinforced mechanical construction and a high-end digital section. RX-A8A drives eleven amplified channels and two subwoofers, integrates multi-zone functions and brings video sources, streaming and network audio together in a single component.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e11.2 channels with 150 W per channel into 8 ohms, measured with two channels driven.\u003c\/li\u003e\n  \u003cli\u003eSeven HDMI inputs and three outputs, up to 8K\/60 Hz and 4K\/120 Hz.\u003c\/li\u003e\n  \u003cli\u003eDolby Atmos®, DTS:X®, AURO-3D® and CINEMA DSP HD3.\u003c\/li\u003e\n  \u003cli\u003eSurround:AI™ analyses scenes and adapts the sound field in real time.\u003c\/li\u003e\n  \u003cli\u003eYPAO™ R.S.C. with multipoint measurement, Precision EQ and 3D measurement.\u003c\/li\u003e\n  \u003cli\u003eESS SABRE ES9026PRO and ES9007S DACs for digital conversion.\u003c\/li\u003e\n  \u003cli\u003eMusicCast, AirPlay 2, Bluetooth and Wi-Fi for streaming and multi-room audio.\u003c\/li\u003e\n  \u003cli\u003eXLR inputs and Zone 2, Zone 3 and Zone 4 management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAVENTAGE architecture\u003c\/h3\u003e\n\u003cp\u003eRX-A8A uses a reinforced chassis, a double-bottom construction and solutions derived from Yamaha's higher-end electronics. The construction limits vibrations generated by the transformer and power stages and keeps sensitive areas separated, with the aim of preserving dynamics and precision during the most complex passages.\u003c\/p\u003e\n\n\u003ch3\u003eSurround:AI™ and immersive formats\u003c\/h3\u003e\n\u003cp\u003eDolby Atmos®, DTS:X® and AURO-3D® are joined by CINEMA DSP HD3 and Surround:AI™. The latter recognises dialogue, music, ambient effects and action scenes, then adjusts DSP processing in real time so the sound field can adapt to the content without requiring continual manual correction.\u003c\/p\u003e\n\n\u003ch3\u003eYPAO™ calibration\u003c\/h3\u003e\n\u003cp\u003eYPAO™ R.S.C. measures the room and addresses the effects of reflections, while multipoint and 3D measurement take the actual speaker layout into account. Precision EQ completes the calibration with finer correction, going beyond the simple adjustment of individual channel levels and distances.\u003c\/p\u003e\n\n\u003ch3\u003eHDMI, video and gaming\u003c\/h3\u003e\n\u003cp\u003eThe HDMI section provides seven inputs and three outputs with signals up to 8K\/60 Hz and 4K\/120 Hz, as well as VRR and ALLM for compatible gaming sources. eARC allows audio from the television to be returned to the AV receiver through the same HDMI connection used for video.\u003c\/p\u003e\n\n\u003ch3\u003eConversion and signal path\u003c\/h3\u003e\n\u003cp\u003eDigital conversion uses ESS SABRE ES9026PRO and ES9007S DACs. The internal layout favours short paths, low-impedance connections and careful separation between circuits, while selected components support the dynamic response and signal-to-noise ratio of the complete chain.\u003c\/p\u003e\n\n\u003ch3\u003eMusicCast and multi-zone\u003c\/h3\u003e\n\u003cp\u003eWi-Fi, Bluetooth, AirPlay 2 and MusicCast allow network content and streaming services to be played and distributed to other compatible devices. Zone 2, Zone 3 and Zone 4 extend use beyond the main room, while the XLR inputs provide balanced connection for dedicated sources.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":42166141124797,"sku":"VDR0660","price":3869.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-av-rx-a8a-9v5vw.jpg?v=1788968924"},{"product_id":"yamaha-ns-2000a","title":"Yamaha NS-2000A","description":"\u003ch2\u003eThree-way floorstander with Harmonious Diaphragm™ and resonance control\u003c\/h2\u003e\n\n\u003cp\u003eNS-2000A is a Yamaha three-way floorstanding speaker using Harmonious Diaphragm™ in ZYLON™ and spruce, R.S. chambers, an acoustic absorber and Mundorf crossover components.\u003c\/p\u003e\n\n\u003cp\u003eThe construction transfers technologies developed for Yamaha reference models into the floorstanding range. Tweeter, midrange and woofer work to maintain a uniform tonal character, while cabinet, damping and bracing are developed through vibration analysis to preserve dynamics and imaging without relying on excessive amounts of sound-absorbing material.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-way floorstanding configuration with four feet.\u003c\/li\u003e\n  \u003cli\u003eHarmonious Diaphragm™ in PBO ZYLON™ fibre and spruce.\u003c\/li\u003e\n  \u003cli\u003eR.S. (Resonance Suppression) chambers on tweeter and midrange.\u003c\/li\u003e\n  \u003cli\u003eYamaha acoustic absorber to control standing waves.\u003c\/li\u003e\n  \u003cli\u003eCabinet studied using laser vibrometry and FEM analysis.\u003c\/li\u003e\n  \u003cli\u003eCrossover with Mundorf audio capacitors.\u003c\/li\u003e\n  \u003cli\u003ePure brass speaker terminals.\u003c\/li\u003e\n  \u003cli\u003eGloss finish produced using a process inspired by Yamaha pianos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHarmonious Diaphragm™\u003c\/h3\u003e\n\u003cp\u003eThe blend of PBO ZYLON™ and spruce is used to achieve high propagation speed together with greater internal damping. Spruce draws on Yamaha's experience with piano soundboards, while ZYLON™ provides lightness and rigidity; the aim is to make the tonal character of the different drivers more uniform.\u003c\/p\u003e\n\n\u003ch3\u003eR.S. chambers\u003c\/h3\u003e\n\u003cp\u003eThe R.S. structures are mounted behind the tweeter and midrange and use two specially shaped ducts to cancel resonances generated on the rear side of the diaphragms. The system works without filling the chambers with absorbent material, helping preserve the finer information in voices and instruments.\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic absorber\u003c\/h3\u003e\n\u003cp\u003eThe cabinet uses a dedicated Yamaha absorber to control internal standing waves while reducing the use of conventional sound-absorbing material. This approach aims to remove cabinet colouration without excessively attenuating acoustic energy, preserving more of the contrast between delicate passages and transients.\u003c\/p\u003e\n\n\u003ch3\u003eCabinet and vibration analysis\u003c\/h3\u003e\n\u003cp\u003eThe construction is studied using tools also employed in musical-instrument research, including laser vibrometers and FEM analysis. Bracing is positioned according to the actual behaviour of the surfaces, allowing the enclosure to control so-called box ringing without simply becoming a structure stiffened indiscriminately at every point.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and terminals\u003c\/h3\u003e\n\u003cp\u003eThe frequency-dividing circuit uses selected components, including Mundorf audio capacitors, to reduce losses between input and drive units. Terminals machined from pure brass provide stable contact and secure tightening, completing the electrical path with a connection designed for long-term Hi-Fi use.\u003c\/p\u003e\n\n\u003ch3\u003ePiano finish\u003c\/h3\u003e\n\u003cp\u003eThe gloss surface uses a process linked to Yamaha grand-piano finishing and turns the large cabinet into an element visually suited to carefully designed domestic interiors. The finish also contributes to surface rigidity, complementing the internal solutions dedicated to mechanical control of the enclosure.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":47654403768664,"sku":"VFA5490","price":6658.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-2000a-4kv78.jpg?v=1788778596"},{"product_id":"yamaha-sps-3000","title":"Yamaha SPS-3000","description":"\u003ch2\u003eDedicated NS-3000 stand with 6 mm metal top plate\u003c\/h2\u003e\n\n\u003cp\u003eSPS-3000 is the Yamaha stand developed for NS-3000, with a 6 mm metal top plate and a wood and MDF structure.\u003c\/p\u003e\n\n\u003cp\u003eThe base creates a rigid support sized for the speaker. The metal plate reinforces the contact point, while anti-vibration feet limit energy transfer between stand and floor.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for Yamaha NS-3000.\u003c\/li\u003e\n  \u003cli\u003e6 mm-thick metal top plate.\u003c\/li\u003e\n  \u003cli\u003eWood and MDF construction.\u003c\/li\u003e\n  \u003cli\u003eDedicated anti-vibration feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBase designed for NS-3000\u003c\/h3\u003e\n\u003cp\u003eThe combination of metal plate, rigid construction and anti-vibration feet supports NS-3000 on a stand developed together with the speaker. The stand controls contact with the floor without relying on an adapted universal base.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":47679575589208,"sku":"VAX7700","price":2698.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-sps-3000-7epop.jpg?v=1788964802"},{"product_id":"yamaha-ns-777","title":"Yamaha NS-777","description":"\u003ch2\u003eThree-way floorstander with dual PMD woofers and waveguides\u003c\/h2\u003e\n\n\u003cp\u003eNS-777 is a Yamaha three-way, four-driver floorstanding speaker with dual 20 cm PMD woofers, a 13 cm midrange, aluminium tweeter and waveguides.\u003c\/p\u003e\n\n\u003cp\u003eThe EF Series bass-reflex cabinet uses an elliptical shape and Piano Black finish, while waveguides on the tweeter and midrange are designed to control dispersion in the domestic environment. The woofers use PMD diaphragms and internal Monster Cable wiring connects the crossover to the drive units; the terminals also support bi-wiring.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-way, four-driver bass-reflex floorstanding system.\u003c\/li\u003e\n  \u003cli\u003eTwo 20 cm woofers with PMD (Polymer-injected Mica Diaphragm) cones.\u003c\/li\u003e\n  \u003cli\u003e13 cm midrange with waveguide.\u003c\/li\u003e\n  \u003cli\u003e2.5 cm aluminium-dome tweeter with waveguide.\u003c\/li\u003e\n  \u003cli\u003eDeclared frequency response from 30 Hz to 35 kHz.\u003c\/li\u003e\n  \u003cli\u003e100 W rated and 250 W maximum input power; 6-ohm impedance.\u003c\/li\u003e\n  \u003cli\u003eInternal Monster Cable wiring and bi-wiring-compatible terminals.\u003c\/li\u003e\n  \u003cli\u003e1,100 mm-high cabinet with Piano Black finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDual PMD woofers\u003c\/h3\u003e\n\u003cp\u003eThe two 20 cm woofers use PMD cones, a polymer-injected mica composite developed to combine rigidity and lightness. The surface is intended to move like a piston within its assigned range without introducing excessive flexing, while the dual-woofer configuration increases the radiating area available at low frequencies.\u003c\/p\u003e\n\n\u003ch3\u003eWaveguides\u003c\/h3\u003e\n\u003cp\u003eThe midrange and tweeter are mounted with waveguides that control dispersion and direct a greater proportion of energy towards the listening area. Yamaha develops this geometry for domestic rooms, where walls and furnishings create early reflections that can alter the perception of imaging and tonal balance.\u003c\/p\u003e\n\n\u003ch3\u003eTweeter and high frequencies\u003c\/h3\u003e\n\u003cp\u003eThe 2.5 cm aluminium-dome tweeter extends the declared response to 35 kHz and is dedicated to the upper frequencies. The waveguide works with the dome to make the transition to the midrange more uniform and keep dispersion more controlled than with a unit mounted directly on the baffle.\u003c\/p\u003e\n\n\u003ch3\u003eWiring and bi-wiring\u003c\/h3\u003e\n\u003cp\u003eThe internal connection between crossover and drive units uses Monster Cable. Rear terminals support bi-wiring, electrically separating crossover sections when the amplifier and cabling allow it; conventional connection with a single cable per speaker naturally remains possible.\u003c\/p\u003e\n\n\u003ch3\u003ePower and sensitivity\u003c\/h3\u003e\n\u003cp\u003eNS-777 specifies 100 W rated and 250 W maximum input power, with 6-ohm impedance and sensitivity of 89 dB\/2.83 V\/1 m. These figures help assess amplifier matching without turning the description into a specification table: the speaker is intended for systems capable of exploiting its dynamics.\u003c\/p\u003e\n\n\u003ch3\u003eCabinet and finish\u003c\/h3\u003e\n\u003cp\u003eThe cabinet measures 1,100 mm in height and weighs 24.4 kg per unit. The elliptical EF Series shape reduces the presence of large parallel surfaces, while the Piano Black finish recalls more traditional Yamaha components, combining substantial room presence with a relatively understated visual approach.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":47680923402584,"sku":"WB38850","price":988.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-777-7hpwv.jpg?v=1788964916"},{"product_id":"yamaha-ns-800a","title":"Yamaha NS-800A","description":"\u003ch2\u003e16 cm two-way design with Harmonious Diaphragm™ and a wide soundstage\u003c\/h2\u003e\n\n\u003cp\u003eNS-800A is a Yamaha two-way speaker with a 16 cm woofer, Harmonious Diaphragm™ in ZYLON™ and spruce, R.S. resonance control and a patented acoustic absorber.\u003c\/p\u003e\n\n\u003cp\u003eNS-800A combines a 16 cm woofer with a tweeter and a larger-volume cabinet than the compact model in the same series. Harmonious Diaphragm™, R.S. chambers and the acoustic absorber are joined by a Twisted Flare Port, while the construction is studied using laser vibrometry and FEM analysis to control enclosure behaviour.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way configuration with 16 cm woofer.\u003c\/li\u003e\n  \u003cli\u003eHarmonious Diaphragm™ made with ZYLON™ and spruce.\u003c\/li\u003e\n  \u003cli\u003eR.S. (Resonance Suppression) structure behind the tweeter.\u003c\/li\u003e\n  \u003cli\u003eYamaha acoustic absorber to limit internal standing waves.\u003c\/li\u003e\n  \u003cli\u003eCabinet developed using laser vibrometry and FEM analysis.\u003c\/li\u003e\n  \u003cli\u003eCrossover with quality components and Mundorf capacitors.\u003c\/li\u003e\n  \u003cli\u003eBrass speaker terminals for a stable connection.\u003c\/li\u003e\n  \u003cli\u003eGloss finish produced using a process inspired by Yamaha pianos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHarmonious Diaphragm™\u003c\/h3\u003e\n\u003cp\u003eThe diaphragm combines ZYLON™, a synthetic fibre with high propagation speed, with spruce, a material also used in Yamaha piano soundboards. Using a common blend for the drive units helps keep tonal character uniform across the spectrum and makes the transition between drivers more continuous.\u003c\/p\u003e\n\n\u003ch3\u003eR.S. structure\u003c\/h3\u003e\n\u003cp\u003eThe R.S. (Resonance Suppression) chamber is mounted behind the tweeter and uses shaped ducts to cancel resonances that would otherwise arise on the rear side of the diaphragm. Instead of absorbing energy indiscriminately, the system targets specific phenomena that can mask the nuances of voices and instruments.\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic absorber\u003c\/h3\u003e\n\u003cp\u003eInside the cabinet Yamaha uses a patented absorber to control standing waves while reducing the amount of conventional sound-absorbing material. The aim is to limit cabinet colouration without taking too much energy from reproduction, preserving dynamics and the sense of presence of the original source.\u003c\/p\u003e\n\n\u003ch3\u003eCabinet and vibration\u003c\/h3\u003e\n\u003cp\u003eThe cabinet structure was studied using laser vibrometers and FEM analysis, tools also employed in the development of Yamaha musical instruments. Bracing is placed where vibration needs to be controlled, avoiding indiscriminate stiffening of every surface and preserving the intended behaviour of the cabinet as a whole.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and terminals\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses selected components, including Mundorf audio capacitors, to divide the signal between woofer and tweeter with limited losses. Brass terminals provide secure cable tightening and complete the electrical path with a mechanically robust connection on the rear panel.\u003c\/p\u003e\n\n\u003ch3\u003eFinish and integration\u003c\/h3\u003e\n\u003cp\u003eThe gloss surface uses a finishing process linked to Yamaha's experience in building grand pianos, making the cabinet suitable for carefully designed domestic interiors as well. The Twisted Flare Port reduces airflow turbulence and bass-reflex port noise. The appearance nevertheless remains subordinate to the rigidity and vibration control required by the acoustic design.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":50099757580632,"sku":"VFW9010","price":3778.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-800a-8gulw.jpg?v=1788966524"},{"product_id":"yamaha-ns-600a","title":"Yamaha NS-600A","description":"\u003ch2\u003eCompact two-way design using materials derived from Yamaha's musical heritage\u003c\/h2\u003e\n\n\u003cp\u003eNS-600A is a Yamaha two-way speaker with a 13 cm woofer, Harmonious Diaphragm™ in ZYLON™ and spruce, R.S. resonance control and a patented acoustic absorber.\u003c\/p\u003e\n\n\u003cp\u003eNS-600A brings acoustic solutions developed for Yamaha's higher-end range into a compact speaker. The 13 cm woofer and tweeter use materials and structures intended to maintain tonal consistency, while the cabinet controls resonances and standing waves without relying on large quantities of absorbent material.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way configuration with 13 cm woofer.\u003c\/li\u003e\n  \u003cli\u003eHarmonious Diaphragm™ made with ZYLON™ and spruce.\u003c\/li\u003e\n  \u003cli\u003eR.S. (Resonance Suppression) structure behind the tweeter.\u003c\/li\u003e\n  \u003cli\u003eYamaha acoustic absorber to limit internal standing waves.\u003c\/li\u003e\n  \u003cli\u003eCabinet developed using laser vibrometry and FEM analysis.\u003c\/li\u003e\n  \u003cli\u003eCrossover with quality components and Mundorf capacitors.\u003c\/li\u003e\n  \u003cli\u003eBrass speaker terminals for a stable connection.\u003c\/li\u003e\n  \u003cli\u003eGloss finish produced using a process inspired by Yamaha pianos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHarmonious Diaphragm™\u003c\/h3\u003e\n\u003cp\u003eThe diaphragm combines ZYLON™, a synthetic fibre with high propagation speed, with spruce, a material also used in Yamaha piano soundboards. Using a common blend for the drive units helps keep tonal character uniform across the spectrum and makes the transition between drivers more continuous.\u003c\/p\u003e\n\n\u003ch3\u003eR.S. structure\u003c\/h3\u003e\n\u003cp\u003eThe R.S. (Resonance Suppression) chamber is mounted behind the tweeter and uses shaped ducts to cancel resonances that would otherwise arise on the rear side of the diaphragm. Instead of absorbing energy indiscriminately, the system targets specific phenomena that can mask the nuances of voices and instruments.\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic absorber\u003c\/h3\u003e\n\u003cp\u003eInside the cabinet Yamaha uses a patented absorber to control standing waves while reducing the amount of conventional sound-absorbing material. The aim is to limit cabinet colouration without taking too much energy from reproduction, preserving dynamics and the sense of presence of the original source.\u003c\/p\u003e\n\n\u003ch3\u003eCabinet and vibration\u003c\/h3\u003e\n\u003cp\u003eThe cabinet structure was studied using laser vibrometers and FEM analysis, tools also employed in the development of Yamaha musical instruments. Bracing is placed where vibration needs to be controlled, avoiding indiscriminate stiffening of every surface and preserving the intended behaviour of the cabinet as a whole.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and terminals\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses selected components, including Mundorf audio capacitors, to divide the signal between woofer and tweeter with limited losses. Brass terminals provide secure cable tightening and complete the electrical path with a mechanically robust connection on the rear panel.\u003c\/p\u003e\n\n\u003ch3\u003eFinish and integration\u003c\/h3\u003e\n\u003cp\u003eThe gloss surface uses a finishing process linked to Yamaha's experience in building grand pianos, making the cabinet suitable for carefully designed domestic interiors as well. The compact format makes placement on stands or dedicated furniture easier. The appearance nevertheless remains subordinate to the rigidity and vibration control required by the acoustic design.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":53606941196632,"sku":"VFW9490","price":1890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-600a-6j1ov.jpg?v=1788781879"},{"product_id":"yamaha-ns3000-destra","title":"Yamaha NS-3000 Destra","description":"\u003ch2\u003eFlagship technologies in a two-way standmount speaker\u003c\/h2\u003e\n\n\u003cp\u003eNS-3000 is a Yamaha two-way speaker with a 16 cm woofer, ZYLON™ drive units, R.S. structure and a crossover using Mundorf components. It is sold individually — two units are required for a stereo pair.\u003c\/p\u003e\n\n\u003cp\u003eThe design transfers many solutions developed for NS-5000 into a standmount format. Woofer and tweeter use ZYLON™ for tonal continuity, while bracing, R.S. chambers and an acoustic absorber control cabinet and driver resonances. The crossover uses selected components and brass terminals to preserve the signal through to the drive units.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way system with 16 cm woofer.\u003c\/li\u003e\n  \u003cli\u003eWoofer and tweeter with ZYLON™-based diaphragms.\u003c\/li\u003e\n  \u003cli\u003eTweeter derived from the NS-5000 design.\u003c\/li\u003e\n  \u003cli\u003eR.S. (Resonance Suppression) structure behind the tweeter.\u003c\/li\u003e\n  \u003cli\u003eDedicated acoustic absorber to control standing waves.\u003c\/li\u003e\n  \u003cli\u003eCabinet developed using FEM analysis and laser measurements.\u003c\/li\u003e\n  \u003cli\u003eCrossover with Mundorf MCap® SUPREME EVO capacitor.\u003c\/li\u003e\n  \u003cli\u003eSold individually — two units are required for a stereo pair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eZYLON™ drive units\u003c\/h3\u003e\n\u003cp\u003eWoofer and tweeter use ZYLON™ to maintain high propagation speed and a consistent tonal character between the two ways. Using the same base material reduces contrast between the low-mid and high-frequency ranges, making the transition around the crossover frequency less perceptible as a change of source.\u003c\/p\u003e\n\n\u003ch3\u003eTweeter and R.S. structure\u003c\/h3\u003e\n\u003cp\u003eThe tweeter derives from the NS-5000 design and uses an R.S. (Resonance Suppression) structure on its rear. The duct is designed to cancel resonance that can develop in the rear cavity of the diaphragm, preventing this energy from returning to the membrane and masking finer high-frequency nuances.\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic absorber\u003c\/h3\u003e\n\u003cp\u003eThe absorber dedicated to NS-3000 reduces standing waves inside the cabinet without filling the volume with large quantities of sound-absorbing material. Yamaha therefore aims to control internal colouration while keeping more signal energy intact, especially through transients and passages with large dynamic variation.\u003c\/p\u003e\n\n\u003ch3\u003eCabinet and bracing\u003c\/h3\u003e\n\u003cp\u003eThe position of the internal bracing is defined through FEM analysis and measurements with laser vibrometers. The design identifies points where cabinet surfaces store or release energy and intervenes selectively, reducing box ringing without indiscriminately stiffening the entire enclosure.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and terminals\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses selected components, including a Mundorf MCap® SUPREME EVO capacitor and a large woofer coil. Pure brass terminals provide secure tightening and complete an electrical path designed to limit losses between amplifier and loudspeaker drive units.\u003c\/p\u003e\n\n\u003ch3\u003eIndividual sale and stereo pairing\u003c\/h3\u003e\n\u003cp\u003eThis file refers to the unit intended for the right channel. NS-3000 is the same physical model for both channels: Yamaha sells it individually — two units are required for a complete stereo pair.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":58399065866584,"sku":"VAX7690","price":4499.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-3000-destra-7s2z0.jpg?v=1791988721"},{"product_id":"yamaha-ns5000-copia","title":"Yamaha NS-5000 Destra","description":"\u003ch2\u003eReference three-way design with ZYLON™ diaphragms and Japanese birch cabinet\u003c\/h2\u003e\n\n\u003cp\u003eNS-5000 is Yamaha's reference three-way standmount speaker, with a 30 cm woofer, ZYLON™ diaphragms and a Japanese white birch plywood cabinet. It is sold individually — two units are required for a stereo pair.\u003c\/p\u003e\n\n\u003cp\u003eThe design recalls the format of the NS-1000M but uses materials and resonance-control systems developed for contemporary reproduction. Tweeter, midrange and woofer share a PBO ZYLON™ diaphragm base, while R.S. ducts, acoustic absorbers and a high-quality crossover work to maintain uniform timbre and limit cabinet colouration.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-way system with 30 cm woofer.\u003c\/li\u003e\n  \u003cli\u003ePBO ZYLON™ fibre diaphragms coated with Monel alloy.\u003c\/li\u003e\n  \u003cli\u003eR.S. ducts to suppress resonances in the mid and high-frequency sections.\u003c\/li\u003e\n  \u003cli\u003eInternal acoustic absorbers with reduced use of sound-absorbing material.\u003c\/li\u003e\n  \u003cli\u003eLaminated Japanese white birch plywood cabinet from Hokkaido.\u003c\/li\u003e\n  \u003cli\u003ePiano Black finish applied to all six surfaces.\u003c\/li\u003e\n  \u003cli\u003eCrossover on 140 µm copper circuitry with Mundorf components.\u003c\/li\u003e\n  \u003cli\u003eProduct sold individually — two units are required for stereo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eZYLON™ and Monel diaphragms\u003c\/h3\u003e\n\u003cp\u003eTweeter, midrange and woofer use diaphragms based on PBO ZYLON™ fibre, a material with high propagation speed and good internal elasticity. The surface is deposition-coated with a Monel alloy developed by Yamaha, with the aim of maintaining uniform speed and tonal character across the full range.\u003c\/p\u003e\n\n\u003ch3\u003eR.S. ducts\u003c\/h3\u003e\n\u003cp\u003eR.S. (Resonance Suppression) ducts control resonances that form behind the mid and high-frequency drive units. The tube geometry acts on specific resonance modes without relying on large amounts of absorbent material, so fine signal nuances are not attenuated together with unwanted colouration.\u003c\/p\u003e\n\n\u003ch3\u003eJapanese birch cabinet\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is built from laminated white birch plywood sourced from Hokkaido and is reinforced to support the 30 cm woofer. The choice of material and bracing aims to control surface vibration without turning the cabinet into an inert mass disconnected from its overall acoustic behaviour.\u003c\/p\u003e\n\n\u003ch3\u003ePiano Black finish\u003c\/h3\u003e\n\u003cp\u003eAll six external surfaces receive a gloss black finish produced using painting and polishing processes linked to Yamaha grand-piano manufacture. The surface layer also increases cabinet rigidity and helps limit the small vibrations that can emerge during reproduction.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and components\u003c\/h3\u003e\n\u003cp\u003eThe frequency-dividing circuit is mounted on a double-sided board with 140 µm copper and uses short paths. Components include Mundorf MCap SUPREME EVO capacitors, MResist SUPREME attenuators and a 1.6 kg woofer coil, selected to reduce losses as the signal passes through the network.\u003c\/p\u003e\n\n\u003ch3\u003eIndividual sale and stereo pairing\u003c\/h3\u003e\n\u003cp\u003eThis file refers to the unit intended for the right channel. NS-5000 is the same physical model for both channels: Yamaha sells it individually — two units are required for a complete stereo pair.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":58399189991768,"sku":"VFU5210","price":7874.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-ns-5000-destra-5mhr3.jpg?v=1788962205"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/collections\/Yamaha-A670-sfondo.jpg?v=1783001622","url":"https:\/\/videosell.fr\/collections\/yamaha-diffusori.oembed","provider":"Videosell store","version":"1.0","type":"link"}