{"title":"stereo preamplifiers","description":"","products":[{"product_id":"videosell-store-preamplificatore-stereo-str","title":"Anthem STR Preamplifier","description":"\u003ch2\u003eAnalogue and digital control with ARC Genesis for advanced stereo systems\u003c\/h2\u003e\n\n\u003cp\u003eAnthem STR Preamplifier is a stereo preamplifier with internal DAC, 32-bit\/384 kHz USB, DSD 2.8\/5.6 MHz, MM\/MC phono, Home Theater By-pass and ARC room correction.\u003c\/p\u003e\n\n\u003cp\u003eSTR Preamplifier concentrates source management, digital conversion and signal processing without including a power-amplifier stage. Digital and analogue inputs, MM\/MC phono, Home Theater By-pass, IP and RS-232 control make it suitable for separate stereo systems where the power amplifier can be chosen independently according to the loudspeakers and required output.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal DAC with USB input up to 32-bit\/384 kHz and DSD 2.8\/5.6 MHz.\u003c\/li\u003e\n  \u003cli\u003eCoaxial and optical SPDIF inputs plus balanced XLR AES\/EBU input.\u003c\/li\u003e\n  \u003cli\u003ePhono stage for MM and MC cartridges.\u003c\/li\u003e\n  \u003cli\u003eAnthem Room Correction ARC Genesis room correction.\u003c\/li\u003e\n  \u003cli\u003eHome Theater By-pass function.\u003c\/li\u003e\n  \u003cli\u003eMultifunction graphical display on the front panel.\u003c\/li\u003e\n  \u003cli\u003eControl via IP and RS-232.\u003c\/li\u003e\n  \u003cli\u003eRemote control and Black or Silver finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDAC and high resolution\u003c\/h3\u003e\n\u003cp\u003eThe internal DAC handles high-resolution digital sources and allows direct connection of computers, streamers and players. The USB input supports PCM up to 32-bit\/384 kHz and DSD 2.8\/5.6 MHz, while coaxial, optical and AES\/EBU inputs expand connectivity.\u003c\/p\u003e\n\n\u003ch3\u003eMM and MC phono\u003c\/h3\u003e\n\u003cp\u003eThe integrated phono stage supports MM and MC cartridges, allowing a turntable to connect directly to the preamplifier. This section complements the line and digital inputs, keeping control of traditional analogue sources and high-resolution digital sources within the same component.\u003c\/p\u003e\n\n\u003ch3\u003eARC Genesis and system management\u003c\/h3\u003e\n\u003cp\u003eARC Genesis analyses loudspeaker response in the room and applies targeted correction to the main anomalies introduced by the listening environment. In this product ARC means Anthem Room Correction and must not be confused with HDMI Audio Return Channel used on other Anthem components.\u003c\/p\u003e\n\n\u003ch3\u003eHome Theater By-pass\u003c\/h3\u003e\n\u003cp\u003eHome Theater By-pass allows STR Preamplifier to be integrated into a system that shares the front loudspeakers with a home cinema installation. The dedicated path separates two-channel listening from multichannel management while preserving an independent stereo chain.\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and control\u003c\/h3\u003e\n\u003cp\u003eThe front graphical display makes configuration and operating information accessible without relying on an external device. IP and RS-232 control simplify integration with automation systems, while the remote control manages the main functions during everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration with external power amplifiers\u003c\/h3\u003e\n\u003cp\u003eBecause it contains no power amplification, STR Preamplifier is designed to drive external power amplifiers selected according to the loudspeakers and system requirements. It is available in Black or Silver and can be paired, among others, with STR Power Amplifier for a fully separate stereo chain.\u003c\/p\u003e\n","brand":"Anthem","offers":[{"title":"Black","offer_id":41771108106429,"sku":"10504787001","price":3975.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":41771108139197,"sku":"10504787003","price":3975.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/anthem-str-preamplifier-nero-r0jek.jpg?v=1789118663"},{"product_id":"preamplificatore-musical-fidelity-m8-pre","title":"Musical Fidelity M8s PRE","description":"\u003ch2\u003eThe balanced preamplifier able to command power amplifiers and long cables\u003c\/h2\u003e\n\u003cp\u003eM8s PRE is a pure Class A preamplifier with MM\/MC phono, separate channel supplies and low-impedance RCA\/XLR outputs.\u003c\/p\u003e\n\u003cp\u003eM8s PRE is the control centre of a separate M8 system. Two XLR, five RCA and a tape loop gather analogue sources; the phono stage accepts MM and MC. Its path is balanced and runs in pure Class A, while separate transformers power the two channels. Low-impedance outputs are designed to drive M8s 500S or a pair of M8s 700M units through long cables. No DAC is included, so digital sources require external conversion.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFully balanced pure Class A preamplifier\u003c\/li\u003e\n  \u003cli\u003eTwo XLR, five RCA and tape loop\u003c\/li\u003e\n  \u003cli\u003eLow-noise MM\/MC phono stage\u003c\/li\u003e\n  \u003cli\u003eLow-impedance RCA and XLR outputs\u003c\/li\u003e\n  \u003cli\u003eSeparate transformers for the two channels\u003c\/li\u003e\n  \u003cli\u003eHT bypass, display and 12 V trigger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eThe partner changes system scale\u003c\/h3\u003e\n\u003cp\u003eWith M8s 500S it forms a 500 W-per-channel stereo pair; with two 700M units each loudspeaker receives its own 700 W monoblock. The preamplifier remains identical, so load, room and modularity determine power choice. Monoblocks increase separation while requiring twice the space, sockets and cost. M8s PRE permits both routes.\u003c\/p\u003e\n\n\u003ch3\u003eDigital volume control, analogue signal path\u003c\/h3\u003e\n\u003cp\u003eVolume is digitally controlled for precision and repeatable settings, but analogue signals are not converted to digital. Display and control allow consistent adjustment between sources. The distinction matters: \"digital volume\" describes command of the attenuator, not DSP inserted into the music. The tape loop also provides fixed output for recording.\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated phono for one principal turntable\u003c\/h3\u003e\n\u003cp\u003eThe MM\/MC stage connects a compatible cartridge directly. For several arms, historic curves or detailed adjustment, M8x Vinyl remains the appropriate partner and occupies a line input. Integrating phono in the preamplifier instead simplifies a one-turntable system and reduces cables in the most sensitive path.\u003c\/p\u003e\n\n\u003ch3\u003eHome cinema without duplicating front speakers\u003c\/h3\u003e\n\u003cp\u003eHT bypass gives the AV processor front-channel volume control and forwards the signal to the selected power amplifier. For music M8s PRE resumes command. The same front speakers serve stereo and cinema without external switches. A 12 V trigger coordinates power amplifiers and is particularly useful with two monoblocks.\u003c\/p\u003e\n\n\u003ch3\u003eWhy not choose M8 Xi\u003c\/h3\u003e\n\u003cp\u003eM8 Xi provides preamplification and 550 W per channel in one chassis with fewer cables and lower total cost. M8s PRE is justified when power amplification must be chosen, placed near the speakers or upgraded independently. Source quality and rack organisation should match the freedom gained.\u003c\/p\u003e\n","brand":"Musical Fidelity","offers":[{"title":"Black","offer_id":42162234884285,"sku":"08803684001","price":3720.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162234917053,"sku":"08803684003","price":3720.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/musical-fidelity-m8s-pre-nero-9bzrm.jpg?v=1789633198"},{"product_id":"preamplificatore-rotel-rc1572-mkii","title":"Rotel RC-1572 MKII","description":"\u003ch2\u003eAnalogue and digital control for a separate stereo chain\u003c\/h2\u003e\n\n\u003cp\u003eRotel RC-1572 MKII is a stereo preamplifier with RCA and balanced XLR inputs, PC-USB, coaxial and optical inputs with MQA, and RCA and balanced XLR outputs plus a subwoofer output, designed to drive external power amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eA large toroidal transformer with low-ESR slit-foil capacitors powers the analogue and digital sections with particular attention to noise. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while the MM phono stage and line connections retain support for analogue sources. Output management enables a separate chain that is more flexible than an integrated amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge toroidal transformer with low-ESR slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX\/AAC and Roon Tested certification.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR outputs plus subwoofer output.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.004%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eA large toroidal transformer with low-ESR slit-foil capacitors powers the preamplifier. Supply separation limits noise transfer between digital and analogue sections and provides a stable reference for the line stages, particularly important because a preamplifier works with signals far lower in level than a power amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eDAC and digital sources\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Players, computers and streamers can use internal conversion and reach the analogue outputs without an external DAC, keeping source selection and volume control concentrated in the preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs allow an entirely analogue path for sources that have already been converted, while balanced inputs reduce sensitivity to noise over longer cable runs where available.\u003c\/p\u003e\n\n\u003ch3\u003ePhono stage\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage allows a compatible turntable to enter the system directly without an external phono preamplifier, sharing volume control and the same outputs used by line and digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eWireless and integration\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX\/AAC and Roon Tested certification complement the wired connections, providing a more immediate route for smartphones and digital libraries without changing the main architecture of the chain.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs to power amplifiers\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR outputs are joined by a subwoofer output. The preamplifier can therefore drive stereo or monoblock power amplifiers and active subwoofers according to the system, keeping source selection separate from power amplification and simplifying future upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and performance\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.004%. The chassis measures 431 x 99 x 338 mm and weighs 8.36 kg, with an internal layout focused on separating the power supply, digital section and analogue path to keep noise low before power amplification.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236129469,"sku":"00205372001","price":1095.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236162237,"sku":"00205372003","price":1095.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rc-1572-mkii-nero-8bmfu.jpg?v=1789026738"},{"product_id":"preamplificatore-rotel-rc1590-mkii","title":"Rotel RC-1590 MKII","description":"\u003ch2\u003eAnalogue and digital control for a separate stereo chain\u003c\/h2\u003e\n\n\u003cp\u003eRotel RC-1590 MKII is a stereo preamplifier with RCA and balanced XLR inputs with DIRECT-PATH mode, PC-USB, coaxial and optical inputs with MQA, dual RCA outputs, balanced XLR outputs and a subwoofer output, designed to drive external power amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eTwo isolated toroidal transformers with separate analogue and digital supplies power the different sections with particular attention to noise. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while the MM phono stage and line connections retain support for analogue sources. Output management enables a separate chain that is more flexible than an integrated amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo isolated toroidal transformers with separate analogue and digital power supplies.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs with DIRECT-PATH mode.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX\/AAC and Roon Tested certification.\u003c\/li\u003e\n  \u003cli\u003eDual RCA outputs, balanced XLR outputs and subwoofer output.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.002%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eTwo isolated toroidal transformers provide separate analogue and digital supplies. This separation limits noise transfer between the two sections and provides a stable reference for the line stages, particularly important because a preamplifier works with signals far lower in level than a power amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eDAC and digital sources\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Players, computers and streamers can use internal conversion and reach the analogue outputs without an external DAC, keeping source selection and volume control concentrated in the preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs with DIRECT-PATH mode allow an entirely analogue path for sources that have already been converted, while balanced inputs reduce sensitivity to noise over longer cable runs where available.\u003c\/p\u003e\n\n\u003ch3\u003ePhono stage\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage allows a compatible turntable to enter the system directly without an external phono preamplifier, sharing volume control and the same outputs used by line and digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eWireless and integration\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX\/AAC and Roon Tested certification complement the wired connections, providing a more immediate route for smartphones and digital libraries without changing the main architecture of the chain.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs to power amplifiers\u003c\/h3\u003e\n\u003cp\u003eDual RCA outputs, balanced XLR outputs and a subwoofer output allow the preamplifier to drive stereo or monoblock power amplifiers and active subwoofers according to the system, keeping source selection separate from power amplification and simplifying future upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and performance\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.002%. The chassis measures 431 x 144 x 348 mm and weighs 10.1 kg, with an internal layout focused on separating the power supply, digital section and analogue path to keep noise low before power amplification.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236195005,"sku":"00205373001","price":1500.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236227773,"sku":"00205373003","price":1500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rc-1590-mkii-nero-7znk6.jpg?v=1789026180"},{"product_id":"preamplificatore-stereo-primare-pre35-prisma","title":"Primare PRE35 Prisma","description":"\u003ch2\u003ePrimare PRE35 Prisma: balanced stereo preamplifier with DAC and network player\u003c\/h2\u003e\n\u003cp\u003ePRE35 Prisma is the complete configuration of the PRE35 preamplifier: the same balanced chassis houses both the DM36 conversion module and the SM35 network module. Compared with the PRE35 DAC it therefore adds streaming, Ethernet and WiFi connection, the USB-A port, multi-room playback and control from the Prisma app; compared with the base PRE35 it adds the whole digital section as well.\u003c\/p\u003e\n\u003cp\u003eThe analogue circuit is balanced throughout and relies on a main board with four layers, so that the signal path is as short as it can be. The DM36 converts PCM signals up to 384 kHz\/32 bit and DSD 256, offers up-sampling choices and processes MQA files; the chip named in the specification is the ESS ES9068A. With this module the preamplifier also gains WiSA, a high-resolution wireless link to compatible powered loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESS ES9068A D\/A converter, PCM up to 384 kHz\/32 bit, DSD 256, MQA\u003c\/li\u003e\n\u003cli\u003eDigital inputs: 4 Toslink optical, 2 coaxial, 1 USB-B\u003c\/li\u003e\n\u003cli\u003eUSB-A port on the Prisma module: it reads PCM up to 24 bit\/192 kHz and DSD 128\u003c\/li\u003e\n\u003cli\u003eNetwork: two Ethernet ports plus dual-band WiFi at 2.4 and 5 GHz\u003c\/li\u003e\n\u003cli\u003eAnalogue inputs: 2 XLR stereo pairs and 3 RCA stereo pairs\u003c\/li\u003e\n\u003cli\u003eAnalogue outputs: 2 pre pairs on XLR; on RCA one pre and one line; one digital output\u003c\/li\u003e\n\u003cli\u003eControl: C25 remote, IR on 3.5 mm jacks (input and output), 12 V trigger output, RS232 port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStreaming and control\u003c\/h3\u003e\n\u003cp\u003ePrisma gathers Primare's network functions: stored and streamed content played in several rooms and zones (multi-room, multi-zone), over cable or wirelessly, managed from phones and tablets through the dedicated app. The PRE35 Prisma is Roon Ready and includes Spotify Connect, Bluetooth and AirPlay 2; Chromecast built-in is on board too and opens direct access to hundreds of streaming apps and services, voice control included. UPnP\/DLNA is on board as well.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe dimensions are 430 mm wide, 106 mm high and 420 mm deep; the weight is 11.3 kg. The finishes on sale are Black and Titanium.\u003c\/p\u003e","brand":"Primare","offers":[{"title":"Black","offer_id":42162239635645,"sku":"00404946001","price":3910.0,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":42162239602877,"sku":"00404946035","price":3910.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/primare-pre35-prisma-black-jienh.jpg?v=1791225728"},{"product_id":"preamplificatore-stereo-primare-pre35-dac","title":"Primare PRE35 DAC","description":"\u003ch2\u003ePrimare PRE35 DAC: balanced stereo preamplifier with the DM36 D\/A converter\u003c\/h2\u003e\n\u003cp\u003ePRE35 DAC is the PRE35 preamplifier with the DM36 conversion module already fitted. Compared with the PRE35 it adds digital inputs, D\/A conversion, MQA decoding and the WiSA link; compared with the PRE35 Prisma it lacks the SM35 network module, which the modular construction still lets the owner install later on.\u003c\/p\u003e\n\u003cp\u003eThe analogue section is balanced throughout and rests on a main board with four layers, chosen to shorten the signal path as far as possible and to keep noise and distortion down. The DM36 is a complete conversion stage based on the ESS ES9068A chip: it handles PCM signals up to 384 kHz\/32 bit and DSD 256 and carries out full MQA processing. The same module brings WiSA, a high-resolution wireless link to compatible powered loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESS ES9068A D\/A converter, PCM up to 384 kHz\/32 bit, DSD 256, MQA\u003c\/li\u003e\n\u003cli\u003eDigital inputs: 4 Toslink optical, 2 coaxial, 1 USB-B\u003c\/li\u003e\n\u003cli\u003eDigital output: one, coaxial\u003c\/li\u003e\n\u003cli\u003eAnalogue inputs: 2 XLR stereo pairs and 3 RCA stereo pairs\u003c\/li\u003e\n\u003cli\u003eAnalogue outputs: 2 pre pairs on XLR; on RCA one pre and one line\u003c\/li\u003e\n\u003cli\u003eControl: C25 remote, IR on 3.5 mm jacks (input and output), 12 V trigger output, RS232 port\u003c\/li\u003e\n\u003cli\u003eWeight: 11.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\u003cp\u003eDigital sources come in through the four optical sockets, the two coaxial ones and the USB-B port; analogue sources through the two balanced pairs and the three unbalanced ones. The pre outputs, on XLR or on RCA, feed the power amplifier, while the RCA line output stays at fixed level. With WiSA-enabled powered loudspeakers the link can be made without signal cables.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe dimensions are 430 mm wide, 106 mm high and 420 mm deep. The finishes on sale are Black and Titanium.\u003c\/p\u003e","brand":"Primare","offers":[{"title":"Black","offer_id":42162239668413,"sku":"00404945001","price":3570.0,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":42162239701181,"sku":"00404945035","price":3570.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/primare-pre35-dac-black-naklf.jpg?v=1791225700"},{"product_id":"preamplificatore-stereo-primare-pre35","title":"Primare PRE35","description":"\u003ch2\u003ePrimare PRE35: modular stereo preamplifier with a balanced circuit\u003c\/h2\u003e\n\u003cp\u003ePRE35 is an entirely analogue stereo preamplifier, with twin XLR inputs and twin XLR outputs and preamplification circuitry that is balanced throughout. It is the base version of the family: it has no converter and no network functions, which come instead with the PRE35 DAC (DM36 module) and the PRE35 Prisma (DM36 and SM35 modules). Thanks to the modular construction the same modules can be fitted whenever the owner chooses.\u003c\/p\u003e\n\u003cp\u003eThe circuit relies on a main board with four layers to keep the signal path as short as it can be, which benefits noise and distortion when any analogue source is selected and passed on. The design also includes selected components, a power supply isolated from the audio sections and an OLED graphic display showing source, volume and information; in standby the consumption is 0.5 W.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBalanced XLR analogue inputs: 2 stereo pairs\u003c\/li\u003e\n\u003cli\u003eRCA analogue inputs: 3 stereo pairs\u003c\/li\u003e\n\u003cli\u003eBalanced XLR pre outputs: 2 stereo pairs\u003c\/li\u003e\n\u003cli\u003eRCA outputs: one variable-level pre output and one fixed-level line output\u003c\/li\u003e\n\u003cli\u003eC25 infrared remote; IR on 3.5 mm jacks, input and output\u003c\/li\u003e\n\u003cli\u003e12 V trigger output on a 3.5 mm jack and RS232 port\u003c\/li\u003e\n\u003cli\u003eWeight: 11.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional modules\u003c\/h3\u003e\n\u003cp\u003eThe PRE35 takes two modules: the DM36, a digital-to-analogue converter, and the SM35, the Prisma network player. They can be fitted together or separately, at purchase or afterwards, and they turn the preamplifier into the PRE35 DAC and PRE35 Prisma versions.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe dimensions are 430 mm wide, 106 mm high and 420 mm deep. The finishes on sale are Black and Titanium.\u003c\/p\u003e","brand":"Primare","offers":[{"title":"Black","offer_id":42162239733949,"sku":"00404944001","price":2890.0,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":42162239766717,"sku":"00404944035","price":2890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/primare-pre35-black-ceebk.jpg?v=1791225673"},{"product_id":"preamplificatore-musical-fidelity-m6-pre","title":"Musical Fidelity M6s PRE","description":"\u003ch2\u003eThe Class A analogue hub for stereo power amplifiers and cinema\u003c\/h2\u003e\n\u003cp\u003eM6s Pre is a balanced pure Class A preamplifier with MM\/MC phono, 24\/96 USB and HT bypass.\u003c\/p\u003e\n\u003cp\u003eM6s Pre separates source control from power. It suits anyone partnering a power amplifier such as M6s Prx, using XLR cables or changing amplification without replacing inputs and volume control. Its balanced circuit runs in pure Class A; two XLR and five RCA inputs accept analogue sources, the phono stage handles MM and MC, and USB-B connects a computer. Low output impedance drives power amplifiers through long cables.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFully balanced pure Class A preamplifier\u003c\/li\u003e\n  \u003cli\u003eTwo XLR and five RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMM\/MC phono stage\u003c\/li\u003e\n  \u003cli\u003eAsynchronous 24-bit\/96kHz USB-B\u003c\/li\u003e\n  \u003cli\u003eHT bypass and RCA\/XLR outputs\u003c\/li\u003e\n  \u003cli\u003eLow output impedance and remote control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy separate preamplifier and power amplifier\u003c\/h3\u003e\n\u003cp\u003eAn integrated amplifier fixes interface and power together. M6s Pre allows the power stage to suit the speakers: M6s Prx for 230 W, an M8 model for more current or active amplification later. When loudspeakers or room change, the control centre can remain. The cost is another chassis and more cabling, justified only by a system expected to evolve.\u003c\/p\u003e\n\n\u003ch3\u003eClass A for the signal, not the loudspeakers\u003c\/h3\u003e\n\u003cp\u003ePure Class A describes the preamplifier stage handling low-level signals; it does not mean M6s Pre powers loudspeakers. Its job is selection, volume and delivery of a robust, quiet signal to the power amplifier. The balanced path keeps positive and negative phases separate between XLR input and output.\u003c\/p\u003e\n\n\u003ch3\u003eVinyl, computer and cinema\u003c\/h3\u003e\n\u003cp\u003eThe MM\/MC phono stage integrates a turntable without another box, while asynchronous USB-B accepts computer audio up to 24\/96. Higher formats can use an external DAC into a line input. HT bypass gives an AV processor front-channel volume control while preserving an independent stereo chain for music.\u003c\/p\u003e\n","brand":"Musical Fidelity","offers":[{"title":"Black","offer_id":42162242846909,"sku":"08804802001","price":1560.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162242879677,"sku":"08804802003","price":1560.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/Musical-Fidelity-m6sPre-front-silver-su-videosel.png?v=1658935133"},{"product_id":"preamplificatore-stereo-yamaha-c5000","title":"Yamaha C-5000","description":"\u003ch2\u003eBalanced preamplification and mechanical control for the 5000 Series\u003c\/h2\u003e\n\n\u003cp\u003eC-5000 is the Yamaha 5000 Series preamplifier, designed with a fully balanced signal path, symmetrical dual-mono construction, two toroidal transformers and low-impedance architecture.\u003c\/p\u003e\n\n\u003cp\u003eThe component combines source selection, volume control and preamplification in a chassis designed to reduce electrical interference and vibration. The left and right sections are arranged as mirror images and powered by dedicated transformers, while the floating balanced topology is also applied to the phono and line stages.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFully balanced signal path for inputs, phono and line stage.\u003c\/li\u003e\n  \u003cli\u003eSymmetrical internal construction with separate left and right circuits.\u003c\/li\u003e\n  \u003cli\u003eTwo toroidal transformers with copper shielding.\u003c\/li\u003e\n  \u003cli\u003eCopper-plated chassis and low-impedance connections.\u003c\/li\u003e\n  \u003cli\u003eVolume control with bearing mechanism for precise rotation.\u003c\/li\u003e\n  \u003cli\u003eSelected components and switches for the analogue signal path.\u003c\/li\u003e\n  \u003cli\u003eSolid brass feet for a stable mechanical reference.\u003c\/li\u003e\n  \u003cli\u003eDesigned to partner the M-5000 power amplifier from the same series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBalanced signal path\u003c\/h3\u003e\n\u003cp\u003eC-5000 maintains a balanced architecture through its main stages to reduce the influence of common-mode noise and preserve signal symmetry. Yamaha applies this approach not only to the line inputs but also to the phono section and preamplifier stages, giving the analogue path a consistent philosophy from input to output.\u003c\/p\u003e\n\n\u003ch3\u003eDual-mono construction\u003c\/h3\u003e\n\u003cp\u003eThe left and right channels are arranged as mirror images and physically separated, reducing interaction between the two sections. The layout keeps signal-path lengths equivalent and contributes to stereo separation, while the power supply is positioned to distribute weight and magnetic-field sources in a controlled manner.\u003c\/p\u003e\n\n\u003ch3\u003eDual toroidal transformers\u003c\/h3\u003e\n\u003cp\u003eTwo toroidal transformers power the preamplifier sections and are shielded to limit the transfer of noise to low-level circuits. Dedicated power supplies help to keep the channels independent and provide stable reserve even when the signal passes through the phono stages, which are particularly sensitive to interference.\u003c\/p\u003e\n\n\u003ch3\u003eLow impedance and chassis\u003c\/h3\u003e\n\u003cp\u003eThe low-impedance concept uses a copper-plated chassis, robust connections and fixing points designed to reduce parasitic resistance along the path. Construction goes beyond shielding alone: chassis, grounds and connections are treated as parts of the circuit, with the aim of maintaining a stable electrical reference for the signal.\u003c\/p\u003e\n\n\u003ch3\u003eVolume control\u003c\/h3\u003e\n\u003cp\u003eThe large volume control uses a bearing mechanism that gives it smooth and precise rotation. Mechanical care is important because the preamplifier signal passes through a highly sensitive attenuation stage; Yamaha therefore combines the feel of the control with selected components designed to limit losses and channel-to-channel variation.\u003c\/p\u003e\n\n\u003ch3\u003eMechanical isolation\u003c\/h3\u003e\n\u003cp\u003eSolid brass feet and a rigid chassis support the transformers and circuit boards on a stable base. Vibration reduction is addressed together with electrical shielding, preventing heavier components from transferring energy to low-level sections and keeping the preamplifier suitable for a high-end analogue signal chain.\u003c\/p\u003e\n","brand":"Yamaha","offers":[{"title":"Black","offer_id":42166138044605,"sku":"VFV9850","price":8369.1,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42166138077373,"sku":"VFV9780","price":8369.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/yamaha-c-5000-nero-86aye.jpg?v=1788966126"},{"product_id":"preamplificatore-trinnov-amethyst","title":"Trinnov Amethyst","description":"\u003c!-- meta_title: Trinnov Amethyst Silver - Hi-Fi Preamplifier | Videosell --\u003e\n\u003c!-- meta_description: Trinnov Amethyst Silver stereo preamplifier with 12 sources, Optimizer, 24-bit\/192 kHz DAC, HybriD phono stage, streaming and Wi-Fi. --\u003e\n\u003ch2\u003eStereo preamplifier with Optimizer and Silver finish\u003c\/h2\u003e\n\u003cp\u003eTrinnov Amethyst Silver is a high-end stereo preamplifier integrating digital conversion, network streaming, active crossover functions and Trinnov Optimizer room correction.\u003c\/p\u003e\n\u003cp\u003eThe platform handles twelve digital and analog sources, includes a HybriD phono stage, network and Wi-Fi connectivity, and D\/A conversion up to 24-bit\/192 kHz. Its 64-bit floating-point processing handles high-resolution signals while retaining native sampling rates up to 192 kHz. Product code \u003cstrong\u003eTHOM003690\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStereo preamplifier with twelve digital and analog sources\u003c\/li\u003e\n  \u003cli\u003eTrinnov Optimizer for loudspeakers and room\u003c\/li\u003e\n  \u003cli\u003e24-bit\/192 kHz D\/A converter\u003c\/li\u003e\n  \u003cli\u003e1.8 GHz Intel Dual-Core processor\u003c\/li\u003e\n  \u003cli\u003e64-bit floating-point processing\u003c\/li\u003e\n  \u003cli\u003eMM phono stage with HybriD technology\u003c\/li\u003e\n  \u003cli\u003eNetwork Renderer with Ethernet and Wi-Fi connectivity\u003c\/li\u003e\n  \u003cli\u003eSilver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptimizer for stereo reproduction\u003c\/h3\u003e\n\u003cp\u003eAmethyst integrates Trinnov Optimizer for measuring and correcting loudspeaker and room response. The guided calibration procedure allows different presets to be created and the main acoustic parameters to be adjusted, while keeping system control within the same preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eDigital inputs and synchronization\u003c\/h3\u003e\n\u003cp\u003eDigital connectivity includes 4 S\/PDIF inputs, two optical and two coaxial, 2 AES3 inputs on XLR, 2 coaxial S\/PDIF outputs and 2 AES3 outputs. Word Clock input and output on BNC are also provided for synchronization with compatible digital sources and equipment.\u003c\/p\u003e\n\n\u003ch3\u003eAnalog inputs and HybriD phono\u003c\/h3\u003e\n\u003cp\u003eThe analog section provides 4 balanced XLR connectors, 4 unbalanced RCA connectors and one stereo RCA input switchable between phono and line. The MM phono stage uses Trinnov HybriD technology, while analog outputs include 4 balanced XLR and 4 unbalanced RCA connectors.\u003c\/p\u003e\n\n\u003ch3\u003eConversion, processing and crossover\u003c\/h3\u003e\n\u003cp\u003eA\/D conversion operates at 24-bit\/96 kHz and D\/A conversion at 24-bit\/192 kHz. The 1.8 GHz Intel Dual-Core processor uses 64-bit floating-point processing; Amethyst also integrates an intelligent two-way active crossover engine for stereo configurations requiring separate band management.\u003c\/p\u003e\n\n\u003ch3\u003eNetwork streaming and control\u003c\/h3\u003e\n\u003cp\u003eThe integrated Network Renderer enables playback from network audio sources and the system includes Ethernet and Wi-Fi connectivity. High-resolution sources up to 192 kHz are processed at their native sampling rate, without systematic conversion to lower sampling frequencies.\u003c\/p\u003e\n\n\u003ch3\u003eFinish, dimensions and power\u003c\/h3\u003e\n\u003cp\u003eThis version uses the Silver finish. The chassis measures 441 x 97 x 418 mm and weighs 9.4 kg; stated shipping weight is 14.9 kg. Power is selectable between 230 and 110 V at 50\/60 Hz, stated consumption is 40 W and the standard warranty is 5 years.\u003c\/p\u003e\n","brand":"Trinnov","offers":[{"title":"Default Title","offer_id":42166138503357,"sku":"THOM003690","price":12675.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/trinnov-amethyst-4q5j9.jpg?v=1791983549"},{"product_id":"preamplificatore-pre-box-rs2-digital","title":"Pro-Ject Pre Box RS2 Digital","description":"\u003cp\u003e\u003cstrong\u003eThe Pre Box RS2 Digital combines preamplifier, D\/A converter and headphone amplifier: two ESS9038Q2M DACs in dual mono, digital and analogue inputs, Bluetooth and an output stage that switches between valves and solid state.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePre Box RS2 Digital: what is inside\u003c\/h2\u003e\n\u003cp\u003eConversion is handled by two ESS Sabre chips, one per channel, with separate signal paths for left and right. Over USB the unit accepts PCM as high as 32 bit \/ 768 kHz and DSD up to DSD512. The USB feed is managed by a multi-core XMOS microcontroller, while re-clocking is done by an Altera MAX II programmable logic device. MQA is decoded entirely in hardware, and the eight selectable digital filters include the one developed by the people behind MQA.\u003c\/p\u003e\n\u003cp\u003eThe wired digital inputs are USB, two optical, one coaxial, one balanced AES\/EBU and one I²S reserved for the CD Box RS2 T transport, to which the preamplifier also supplies the 16.9344 MHz master clock; Bluetooth 4.0 with SBC, AAC and aptX is added on top. Analogue sources get one XLR and one RCA line input, and the feed to the power amplifier is offered both balanced and single-ended.\u003c\/p\u003e\n\u003cp\u003eThe output buffer is discrete and balanced and can run either in solid state or through the four 6922EH valves, according to the listener's taste. The headphone amplifier is DC coupled from input to output, with no capacitors in the signal path and a servo that keeps direct voltage off the 6.35 mm jack. The front display, an aluminium handset and the external 20 V power supply complete the package.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eConverters: 2 ESS9038Q2M in dual mono, 32 bit \/ 768 kHz and DSD512 maximum\u003c\/li\u003e\u003cli\u003eUSB input: 1 USB 2.0 Audio, PCM 32\/768, native DSD and DoP to DSD512\u003c\/li\u003e\u003cli\u003eI²S input: 1, for the CD Box RS2 T, with 16.9344 MHz master clock\u003c\/li\u003e\u003cli\u003eS\/PDIF inputs: 2 optical and 1 coaxial, up to 24 bit \/ 192 kHz\u003c\/li\u003e\u003cli\u003eAES\/EBU input: 1 balanced, up to 24 bit \/ 192 kHz\u003c\/li\u003e\u003cli\u003eBluetooth: version 4.0 built in, SBC, AAC and aptX codecs\u003c\/li\u003e\u003cli\u003eMQA: complete decoding in hardware\u003c\/li\u003e\u003cli\u003eAnalogue line inputs: 1 XLR and 1 RCA, 15 kΩ impedance\u003c\/li\u003e\u003cli\u003eAnalogue outputs: XLR and RCA pre-out, headphones on 6.35 mm jack\u003c\/li\u003e\u003cli\u003eOutput impedance: 180 Ω in solid state, 220 Ω with valves\u003c\/li\u003e\u003cli\u003eHeadphone power: 90 mW into 300 Ω, 245 mW into 32 Ω, 150 mW into 8 Ω\u003c\/li\u003e\u003cli\u003eTHD+N (20 Hz - 20 kHz): below 0.006% solid state, 0.017% valves, at 2 V RMS and 1 kHz\u003c\/li\u003e\u003cli\u003eOutput stage: discrete and balanced, valve or solid state\u003c\/li\u003e\u003cli\u003eValves: 4 x 6922EH\u003c\/li\u003e\u003cli\u003ePower: external 20 V \/ 3 A DC unit, 110-240 V mains\u003c\/li\u003e\u003cli\u003eCurrent draw: 1.2 A at most, under 0.5 W on standby\u003c\/li\u003e\u003cli\u003eSize: 206 mm wide, 72 mm high, 222 mm deep, sockets included\u003c\/li\u003e\u003cli\u003eWeight: 1.71 kg, power supply excluded\u003c\/li\u003e\u003cli\u003eFinishes: black, silver\u003c\/li\u003e\u003c\/ul\u003e","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":42415049179325,"sku":"01004913238","price":2079.2,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42415049212093,"sku":"01004913003","price":2079.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/pro-ject-pre-box-rs2-digital-nero-yroi1.jpg?v=1792396796"},{"product_id":"preamplificatore-stereo-sc15-prisma","title":"Primare SC15 Prisma MK2","description":"\u003ch2\u003ePrimare SC15 Prisma MK2: a network player and D\/A converter with preamplifier functions\u003c\/h2\u003e\n\u003cp\u003eSC15 Prisma MK2 is a network player and D\/A converter that also acts as a preamplifier. It brings together Prisma technology for streaming and control, automatic and manual equalisation of the speakers and the high-resolution WiSA wireless link. According to Primare it improves on the original SC15 Prisma in all performance parameters; the Auto Room and manual equalisation function is new to this MK2 version.\u003c\/p\u003e\n\u003cp\u003eConversion, built around the ESS ES9028Q2M chip, reaches PCM 384 kHz and DSD 256. The output is selectable: at fixed level the unit serves as a network player for an existing system, at variable level it drives two powered speakers directly. WiSA adds a further output towards compatible powered speakers and subwoofers; when the WiSA link is in use, the analog output can be set up for a wired subwoofer.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESS ES9028Q2M D\/A converter, PCM up to 384 kHz plus DSD 256\u003c\/li\u003e\n\u003cli\u003eTwo analog stereo inputs on RCA\u003c\/li\u003e\n\u003cli\u003eDigital inputs: three Toslink, one RCA and one USB-B\u003c\/li\u003e\n\u003cli\u003eVariable stereo analog output and a digital output\u003c\/li\u003e\n\u003cli\u003eEthernet, WiFi and one USB-A socket\u003c\/li\u003e\n\u003cli\u003eWiSA link for wireless speakers\u003c\/li\u003e\n\u003cli\u003eC25 remote control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStreaming and control\u003c\/h3\u003e\n\u003cp\u003ePrisma handles stored and streamed music, in several rooms too, from the control app for mobile devices. It includes Chromecast built-in, Spotify Connect, Roon Ready, Bluetooth and AirPlay 2, along with voice control. Room equalisation is run from the Prisma application with an iOS device, or with the Zen microphone when Android is used: the speakers emit pink noise for 60 seconds as the microphone is moved about the room, then the system works out the compensation and applies a bass filter; the response can be touched up by hand. An RS232 port, a 12 V trigger with input and output and 3.5 mm IR sockets are fitted.\u003c\/p\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eDimensions: width 350 mm, height 73 mm, depth 329 mm. Weight: 6 kg. The display is an OLED and in standby the unit draws 0.5 W. Finishes on sale: Black and Titanium.\u003c\/p\u003e","brand":"Primare","offers":[{"title":"Black","offer_id":42453682553021,"sku":"00406723238","price":1700.0,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":42453682585789,"sku":"00406723477","price":1700.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/primare-sc15-prisma-mk2-nero-velqq.jpg?v=1791967931"},{"product_id":"statement-nac-s1","title":"Naim Statement NAC S1","description":"\u003ch2\u003eStatement control: separate preamplification, eight inputs and vertical isolation\u003c\/h2\u003e\n\u003cp\u003eNaim Statement NAC S1 is the Statement-family preamplifier, designed to drive a pair of NAP S1 monoblocks while accepting DIN, RCA and XLR sources.\u003c\/p\u003e\n\u003cp\u003eThe single Naim Statement NAC S1 is an analogue preamplifier built as a self-contained vertical system, with power circuitry at the bottom and audio electronics above. An acrylic section and dedicated internal chambers separate these areas, while sensitive circuits are suspended on a brass sub-chassis to reduce vibration and interference.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThree DIN inputs, three RCA inputs and two balanced XLR inputs\u003c\/li\u003e\u003cli\u003eOne balanced XLR output and two unbalanced 4-pin DIN outputs\u003c\/li\u003e\u003cli\u003eVertical architecture with power and audio stages physically separated\u003c\/li\u003e\u003cli\u003eSensitive electronics suspended on a brass sub-chassis with a 12 Hz resonant frequency\u003c\/li\u003e\u003cli\u003eCritical components selected and matched during construction\u003c\/li\u003e\u003cli\u003ePower supply integrated into the base with no additional external PSU required\u003c\/li\u003e\u003cli\u003e940 × 270 × 412 mm dimensions and 61.5 kg weight\u003c\/li\u003e\u003cli\u003eHand-built in Salisbury and produced to order\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eThe natural partner for a pair of NAP S1s\u003c\/h3\u003e\n\u003cp\u003eStatement is conceived as a complete system: NAC S1 handles input selection, level control and line output, while the two NAP S1 monoblocks provide power, one per channel. XLR connection keeps the route balanced into the monoblocks and makes the division between control and power amplification explicit.\u003c\/p\u003e\n\u003ch3\u003eHow it differs from NAC 552\u003c\/h3\u003e\n\u003cp\u003eNAC 552 belongs to the 500 Series and uses a separate 552 PS supply, with DIN and RCA inputs in a two-box horizontal arrangement. NAC S1 instead starts from Statement's vertical architecture, adds balanced XLR inputs and houses its power supply within the same structural body while keeping it electrically and mechanically isolated from audio circuitry.\u003c\/p\u003e\n\u003ch3\u003eA preamplifier that can work beyond the complete Statement system\u003c\/h3\u003e\n\u003cp\u003eXLR and DIN outputs allow NAC S1 to work with other Naim amplification where the correct cabling and system compatibility are observed. Its natural position remains ahead of NAP S1: preamplifier and monoblocks share the same mechanical logic, with power below, signal circuitry above and internal separation between functional sections. Build-to-order production also reflects Statement's role as a dedicated system component rather than an electronics box intended to drop casually into any chain. The result is a control stage whose role remains distinct from both the digital source and the power amplifiers.\u003c\/p\u003e","brand":"Naim","offers":[{"title":"Default Title","offer_id":42454094348477,"sku":"","price":105000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/naim-statement-nac-s1-front-fglja.jpg?v=1790752258"},{"product_id":"nac-552","title":"Naim NAC 552","description":"\u003ch2\u003eTwo-box 500 Series preamplification with dedicated 552 PS and suspended sub-chassis\u003c\/h2\u003e\n\u003cp\u003eNaim NAC 552 separates audio circuitry and power supply into two chassis, with DIN\/RCA inputs, AV bypass and a dedicated 552 PS as part of the system.\u003c\/p\u003e\n\u003cp\u003eThe single Naim NAC 552 is sold as one preamplifier but physically operates as a two-box system: the main chassis contains signal circuitry while the dedicated 552 PS houses transformer and regulation. It is the natural partner for NAP 500 DR and differs from Statement NAC S1 through a more traditional layout without XLR inputs, centred on DIN and RCA connection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eSeven DIN inputs and two RCA inputs available for system configuration\u003c\/li\u003e\u003cli\u003eTwo inputs configurable for unity gain in home-cinema integration\u003c\/li\u003e\u003cli\u003e29 dB analogue gain with maximum volume specified at 22 dB\u003c\/li\u003e\u003cli\u003eIndependent listen and record banks\u003c\/li\u003e\u003cli\u003eBrass sub-chassis suspended on springs to isolate sensitive circuitry\u003c\/li\u003e\u003cli\u003e552 PS supply with 800 VA toroidal transformer and DR regulation\u003c\/li\u003e\u003cli\u003eBurndy and SNAIC 5 supplied for connection between the two chassis\u003c\/li\u003e\u003cli\u003eRemote control included and no integrated headphone output\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eThe partner for NAP 500 DR\u003c\/h3\u003e\n\u003cp\u003eNAC 552 handles source selection and level control, while NAP 500 DR receives the signal and drives the loudspeakers from its own separate 500 PS supply. Together they form a 500 Series amplifier system using four physical chassis: two for preamplification and two for the power amplifier.\u003c\/p\u003e\n\u003ch3\u003eHow it differs from NAC 332\u003c\/h3\u003e\n\u003cp\u003eNAC 332 belongs to New Classic 300 and offers XLR inputs, headphone output and an optional NPX 300 upgrade. NAC 552 follows the 500 Series platform and includes its dedicated 552 PS as a required part of the design. The two preamplifiers therefore use different connection and power-supply architectures.\u003c\/p\u003e\n\u003ch3\u003eAnalogue sources and AV integration\u003c\/h3\u003e\n\u003cp\u003eAssignable inputs, separate listen\/record paths and unity-gain bypass allow stereo sources and a home-cinema processor to share one system. ND 555 can connect directly to NAC 552 through DIN or RCA, creating a complete 500 Series chain ahead of NAP 500 DR. Separation between audio chassis and 552 PS is therefore an essential part of the product rather than a later optional upgrade. The preamplifier remains the analogue control centre without adding streaming or headphone amplification.\u003c\/p\u003e","brand":"Naim","offers":[{"title":"Default Title","offer_id":42454094512317,"sku":"00-002-0011","price":30300.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/naim-nac-552-front-gielg.jpg?v=1790752327"},{"product_id":"preamplificatori-stereo-phonitor-x","title":"SPL Phonitor X","description":"\u003cp\u003e\u003cstrong\u003eStereo preamplifier and headphone amplifier with VOLTAiR technology, jack and XLR headphone outputs with 2 × 8 W and VU meters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePhonitor X: the design\u003c\/h2\u003e\n\u003cp\u003eThe Phonitor X works as a preamplifier for power amplifiers or active speakers and as an amplifier for standard and balanced headphones. Two analogue inputs, XLR and RCA, and XLR and RCA outputs. There are the Matrix effect, channel balance and a stereo\/mono switch; the VU meters show the level of both channels.\u003c\/p\u003e\n\u003cp\u003eLike the other SPL components it uses VOLTAiR technology: the audio circuits run on ±60 V rails, with discrete op-amps of SPL's own design and a shielded toroidal transformer.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eHeadphone outputs: 6.3 mm jack and balanced 4-pin XLR, 2 × 8 W\u003c\/li\u003e\u003cli\u003eInputs: 1 XLR, 1 RCA\u003c\/li\u003e\u003cli\u003eOutputs: XLR and RCA\u003c\/li\u003e\u003cli\u003eVolume: motorised Alps RK27 \"Big Blue\"\u003c\/li\u003e\u003cli\u003eMatrix: simulates loudspeaker listening on headphones\u003c\/li\u003e\u003cli\u003eRemote control: learns the commands of any infrared remote\u003c\/li\u003e\u003cli\u003eTrigger: 12 V\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 278 × 100 × 330 mm\u003c\/li\u003e\u003cli\u003eWeight: 4.3 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, silver, red\u003c\/li\u003e\u003c\/ul\u003e","brand":"SPL","offers":[{"title":"Black","offer_id":42483960447165,"sku":"11105169238","price":2040.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42483960479933,"sku":"11105169003","price":2040.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":42483960512701,"sku":"11105169446","price":2040.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/spl-phonitor-x-nero-2x5uu.jpg?v=1791980511"},{"product_id":"preamplificatori-stereo-phonitor-x-dac","title":"SPL Phonitor X DAC","description":"\u003cp\u003e\u003cstrong\u003eStereo preamplifier and headphone amplifier with a 32-bit\/768 kHz D\/A converter and VOLTAiR technology.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePhonitor X DAC: the design\u003c\/h2\u003e\n\u003cp\u003eThe Phonitor X DAC has the features of the Phonitor X plus the AKM AK4490 Velvet Sound converter for PCM and DSD256, with three digital inputs: optical, coaxial and USB.\u003c\/p\u003e\n\u003cp\u003eLike the other SPL components it uses VOLTAiR technology: the audio circuits run on ±60 V rails, with discrete op-amps of SPL's own design and a shielded toroidal transformer.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eHeadphone outputs: 6.3 mm jack and balanced 4-pin XLR, 2 × 8 W\u003c\/li\u003e\u003cli\u003eConverter: AKM AK4490 Velvet Sound, 32-bit\/768 kHz, DSD256\u003c\/li\u003e\u003cli\u003eDigital inputs: optical, coaxial, USB\u003c\/li\u003e\u003cli\u003eAnalogue inputs: 1 XLR, 1 RCA\u003c\/li\u003e\u003cli\u003eOutputs: XLR and RCA\u003c\/li\u003e\u003cli\u003eVolume: motorised Alps RK27 \"Big Blue\"\u003c\/li\u003e\u003cli\u003eMatrix: simulates loudspeaker listening on headphones\u003c\/li\u003e\u003cli\u003eRemote control: learns the commands of any infrared remote\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 278 × 100 × 330 mm\u003c\/li\u003e\u003cli\u003eWeight: 4.7 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, silver, red\u003c\/li\u003e\u003c\/ul\u003e","brand":"SPL","offers":[{"title":"Black","offer_id":42483964903613,"sku":"11105170238","price":2400.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42483964936381,"sku":"11105170003","price":2400.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":42483964969149,"sku":"11105170446","price":2400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/spl-phonitor-x-dac-nero-301xa.jpg?v=1791980650"},{"product_id":"preamplificatori-stereo-elector","title":"SPL Elector","description":"\u003cp\u003e\u003cstrong\u003eAnalogue stereo preamplifier with VOLTAiR technology, six XLR and RCA inputs and VU meters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eElector: the design\u003c\/h2\u003e\n\u003cp\u003eThe Elector is an all-analogue preamplifier: three XLR and three RCA inputs, XLR and RCA outputs and Tape Monitor. Volume is handled by the motorised Alps pot and, like source selection, can be controlled with any remote once learned.\u003c\/p\u003e\n\u003cp\u003eLike the other SPL components it uses VOLTAiR technology: the audio circuits run on ±60 V rails, with discrete op-amps of SPL's own design and a shielded toroidal transformer.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eInputs: 3 XLR, 3 RCA\u003c\/li\u003e\u003cli\u003eOutputs: XLR and RCA\u003c\/li\u003e\u003cli\u003eTape Monitor: yes\u003c\/li\u003e\u003cli\u003eVolume: motorised Alps RK27 \"Big Blue\"\u003c\/li\u003e\u003cli\u003eRemote control: learns the commands of any infrared remote\u003c\/li\u003e\u003cli\u003eTrigger: 12 V\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 278 × 100 × 330 mm\u003c\/li\u003e\u003cli\u003eWeight: 4.25 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, silver, red\u003c\/li\u003e\u003c\/ul\u003e","brand":"SPL","offers":[{"title":"Black","offer_id":42483968475325,"sku":"11105175238","price":2160.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42483968508093,"sku":"11105175003","price":2160.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":42483968540861,"sku":"11105175446","price":2160.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/spl-elector-nero-2pu85.jpg?v=1791980187"},{"product_id":"preamplificatori-stereo-director-mk2","title":"SPL Director Mk2","description":"\u003cp\u003e\u003cstrong\u003eStereo preamplifier with a 32-bit\/768 kHz D\/A converter, VOLTAiR technology, six analogue and four digital inputs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDirector Mk2: the design\u003c\/h2\u003e\n\u003cp\u003eThe Director Mk2 combines an analogue preamplifier with the AKM AK4490 Velvet Sound converter for PCM and DSD256, with a low-pass filter switchable between PCM and DSD. It has a dot-matrix display, VU meters, Tape Monitor and the motorised Alps pot.\u003c\/p\u003e\n\u003cp\u003eLike the other SPL components it uses VOLTAiR technology: the audio circuits run on ±60 V rails, with discrete op-amps of SPL's own design and a shielded toroidal transformer.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eConverter: AKM AK4490 Velvet Sound, 32-bit\/768 kHz, DSD256\u003c\/li\u003e\u003cli\u003eAnalogue inputs: 2 XLR, 4 RCA\u003c\/li\u003e\u003cli\u003eDigital inputs: AES, optical, coaxial, USB\u003c\/li\u003e\u003cli\u003eOutputs: XLR and RCA\u003c\/li\u003e\u003cli\u003eVolume: motorised Alps RK27 \"Big Blue\"\u003c\/li\u003e\u003cli\u003eRemote control: learns the commands of any infrared remote\u003c\/li\u003e\u003cli\u003eTrigger: 12 V\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 278 × 100 × 330 mm\u003c\/li\u003e\u003cli\u003eWeight: 4.55 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, silver, red\u003c\/li\u003e\u003c\/ul\u003e","brand":"SPL","offers":[{"title":"Black","offer_id":42483972505789,"sku":"11105176238","price":3040.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42483972538557,"sku":"11105176003","price":3040.0,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":42483972571325,"sku":"11105176446","price":3040.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/spl-director-mk2-nero-2wejd.jpg?v=1791980475"},{"product_id":"preamplificatore-stereo-delta-pre","title":"Delta class pre","description":"\u003ch2 data-section-id=\"12afs4j\" data-start=\"21\" data-end=\"93\"\u003eThe heart of the system: control, transparency and absolute refinement\u003c\/h2\u003e\n\n\u003cp data-start=\"94\" data-end=\"698\"\u003e The \u003cstrong data-start=\"97\" data-end=\"117\"\u003eClassé Delta PRE\u003c\/strong\u003e is the Delta series' reference preamplifier, designed to offer an extremely pure signal path and comprehensive system management. Its \u003cstrong data-start=\"289\" data-end=\"317\"\u003efully balanced\u003c\/strong\u003e topology, oversized power supply, and \u003cstrong data-start=\"392\" data-end=\"414\"\u003eprecision relay\u003c\/strong\u003e volume control section ensure exceptional transparency, dynamics, and background silence. Designed for high-end stereo and premium audio-video systems, the Delta PRE combines elegant construction, precision engineering, and an intuitive interface with a high-resolution central display. \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/products\/classe_audio_delta_pre_frontale-su-videosell-01_600x600.jpg?v=1668611702\" alt=\"Stereo preamplifier\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\n\u003ch2 data-section-id=\"1h7n978\" data-start=\"700\" data-end=\"769\"\u003e Advanced audio architecture and reference-level digital conversion\u003c\/h2\u003e\n\n \u003cp data-start=\"770\" data-end=\"1341\"\u003eThe digital section integrates a \u003cstrong data-start=\"801\" data-end=\"845\"\u003ehigh-performance 32-bit\/384 kHz DAC\u003c\/strong\u003e with \u003cstrong data-start=\"859\" data-end=\"882\"\u003eDSD support up to 11.2 MHz\u003c\/strong\u003e , ensuring precise and natural conversion. The analog circuit operates in \u003cstrong data-start=\"972\" data-end=\"990\"\u003efully balanced\u003c\/strong\u003e mode, with selected components and optimized signal paths to reduce noise and distortion. The asynchronous \u003cstrong data-start=\"1098\" data-end=\"1107\"\u003eUSB-B\u003c\/strong\u003e input, \u003cstrong data-start=\"1132\" data-end=\"1154\"\u003ecoaxial and optical\u003c\/strong\u003e inputs, as well as XLR and RCA analog inputs, allow complete management of modern and traditional sources, maintaining tonal coherence and detail across the entire frequency range.\u003c\/p\u003e\n\n\u003ch2 data-section-id=\"1aics2q\" data-start=\"1343\" data-end=\"1404\"\u003e Professional integration and total system control\u003c\/h2\u003e\n\n \u003cp data-start=\"1405\" data-end=\"1965\"\u003eThe Delta PRE is designed to integrate seamlessly into advanced installations thanks to \u003cstrong data-start=\"1500\" data-end=\"1512\"\u003eEthernet\u003c\/strong\u003e , \u003cstrong data-start=\"1514\" data-end=\"1524\"\u003eRS-232\u003c\/strong\u003e , \u003cstrong data-start=\"1526\" data-end=\"1532\"\u003eIR\u003c\/strong\u003e , \u003cstrong data-start=\"1534\" data-end=\"1548\"\u003eDC Trigger\u003c\/strong\u003e and \u003cstrong data-start=\"1551\" data-end=\"1562\"\u003eCAN-Bus\u003c\/strong\u003e ports, ideal for home automation systems and professional racks. The mechanical construction with a solid aluminum chassis and passive thermal management ensure operational stability and long life. The graphical interface and dedicated remote control allow simple and precise control of all functions, making the Delta PRE the perfect nerve center for systems with Delta STEREO or Delta MONO power amplifiers. \u003c\/p\u003e\n\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\n\u003ctable data-start=\"2001\" data-end=\"2712\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\n\u003ctbody data-start=\"2041\" data-end=\"2712\"\u003e\n\n\u003ctr data-start=\"2041\" data-end=\"2098\"\u003e\n\n\u003ctd data-start=\"2041\" data-end=\"2053\" data-col-size=\"sm\"\u003e \u003cstrong\u003eTypology\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2053\" data-end=\"2098\"\u003e Stereo preamplifier with integrated DAC \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2099\" data-end=\"2159\"\u003e\n\n\u003ctd data-start=\"2099\" data-end=\"2114\" data-col-size=\"sm\"\u003e \u003cstrong\u003eArchitecture\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2114\" data-end=\"2159\"\u003e Fully balanced \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2160\" data-end=\"2207\"\u003e\n\n\u003ctd data-start=\"2160\" data-end=\"2183\" data-col-size=\"sm\"\u003e \u003cstrong\u003eDigital conversion\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2183\" data-end=\"2207\"\u003e DAC 32 bit \/ 384 kHz \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2208\" data-end=\"2251\"\u003e\n\n\u003ctd data-start=\"2208\" data-end=\"2223\" data-col-size=\"sm\"\u003e \u003cstrong\u003eDSD support\u003c\/strong\u003e\n\u003c\/td\u003e\n\n \u003ctd data-col-size=\"md\" data-start=\"2223\" data-end=\"2251\"\u003eUp to DSD256 (11.2 MHz) \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2252\" data-end=\"2295\"\u003e\n\n\u003ctd data-start=\"2252\" data-end=\"2276\" data-col-size=\"sm\"\u003e \u003cstrong\u003eFrequency response\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2276\" data-end=\"2295\"\u003e 10 Hz – 200 kHz \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2296\" data-end=\"2316\"\u003e\n\n\u003ctd data-start=\"2296\" data-end=\"2304\" data-col-size=\"sm\"\u003e \u003cstrong\u003eTHD+N\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2304\" data-end=\"2316\"\u003e \u0026lt;0.0007% \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2317\" data-end=\"2343\"\u003e\n\n\u003ctd data-start=\"2317\" data-end=\"2332\" data-col-size=\"sm\"\u003e \u003cstrong\u003eS\/N ratio\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2332\" data-end=\"2343\"\u003e \u0026gt;110 dB \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2344\" data-end=\"2396\"\u003e\n\n\u003ctd data-start=\"2344\" data-end=\"2365\" data-col-size=\"sm\"\u003e \u003cstrong\u003eAnalog inputs\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2365\" data-end=\"2396\"\u003e 2 × balanced XLR; 2 × RCA \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2397\" data-end=\"2457\"\u003e\n\n\u003ctd data-start=\"2397\" data-end=\"2417\" data-col-size=\"sm\"\u003e \u003cstrong\u003eDigital inputs\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2417\" data-end=\"2457\"\u003e 1 × USB-B; 2 × Coaxial; 2 × Optical \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2458\" data-end=\"2498\"\u003e\n\n\u003ctd data-start=\"2458\" data-end=\"2467\" data-col-size=\"sm\"\u003e \u003cstrong\u003eExits\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2467\" data-end=\"2498\"\u003e 1 × Balanced XLR; 1 × RCA \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2499\" data-end=\"2561\"\u003e\n\n\u003ctd data-start=\"2499\" data-end=\"2518\" data-col-size=\"sm\"\u003e \u003cstrong\u003eVolume control\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2518\" data-end=\"2561\"\u003e Precision Relay Resistor Network \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2562\" data-end=\"2641\"\u003e\n\n\u003ctd data-start=\"2562\" data-end=\"2589\" data-col-size=\"sm\"\u003e \u003cstrong\u003eControl and integration\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2589\" data-end=\"2641\"\u003e Ethernet, RS-232, IR In\/Out, DC Trigger, CAN-Bus \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2642\" data-end=\"2689\"\u003e\n\n\u003ctd data-start=\"2642\" data-end=\"2667\" data-col-size=\"sm\"\u003e \u003cstrong\u003eDimensions (L × W × H)\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2667\" data-end=\"2689\"\u003e 444 × 419 × 121 mm \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr data-start=\"2690\" data-end=\"2712\"\u003e\n\n\u003ctd data-start=\"2690\" data-end=\"2697\" data-col-size=\"sm\"\u003e \u003cstrong\u003eWeight\u003c\/strong\u003e\n\u003c\/td\u003e\n\n\u003ctd data-col-size=\"md\" data-start=\"2697\" data-end=\"2712\"\u003e approximately 11 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e","brand":"Classè","offers":[{"title":"Default Title","offer_id":42486268919997,"sku":"DELTAPREUKEC","price":10800.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/classe-delta-pre-ctrl3.jpg?v=1792057622"},{"product_id":"preamplificatore-stereo-nsc-222","title":"Naim NSC 222","description":"\u003ch2\u003eStreamer and preamplifier in one chassis for New Classic 200\u003c\/h2\u003e\n\u003cp\u003eNaim NSC 222 combines high-resolution streaming, volume control, MM phono and headphone amplification, with NAP 250 as its natural power partner.\u003c\/p\u003e\n\u003cp\u003eThe single Naim NSC 222 reduces New Classic to two principal electronics: source and preamplifier share one chassis, while NAP 250 drives the loudspeakers. Compared with NSS 333 plus NAC 332 it gives up some of the 300 Series modularity, but keeps streaming, analogue inputs, phono and headphones in a more compact system.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eNetwork playback up to 32-bit\/384 kHz WAV and DSD128, with high-resolution FLAC, AIFF and ALAC support\u003c\/li\u003e\u003cli\u003eStreaming services and protocols include AirPlay 2, Chromecast, Roon Ready, Spotify Connect, TIDAL, Qobuz, UPnP and Bluetooth\u003c\/li\u003e\u003cli\u003eIntegrated MM phono input with 40 dB gain\u003c\/li\u003e\u003cli\u003eAnalogue inputs on 8-pin DIN and stereo RCA\u003c\/li\u003e\u003cli\u003ePreamplifier outputs on XLR and RCA\u003c\/li\u003e\u003cli\u003e6.35 mm headphone socket delivering 1.5 W into 16 ohms\u003c\/li\u003e\u003cli\u003e5.5\" colour display, app control and Zigbee remote\u003c\/li\u003e\u003cli\u003ePower-supply upgrade available through NPX 300, with support for Super Lumina cabling\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eThe 200 system: NSC 222 plus NAP 250\u003c\/h3\u003e\n\u003cp\u003eXLR connection carries the signal directly to NAP 250, the 100 W-per-channel stereo power amplifier. Optical System Automation can synchronise the electronics, so a two-box arrangement still behaves as one coordinated system without requiring the separate NAC 332 preamplifier.\u003c\/p\u003e\n\u003ch3\u003eVinyl built in, with room to expand\u003c\/h3\u003e\n\u003cp\u003eAn internal phono stage is already available for MM cartridges. Owners of MC cartridges, or anyone wanting a more adjustable external phono section, can add NVC TT and power it from the compatible system connection or partner it with its dedicated NPX TT supply.\u003c\/p\u003e\n\u003ch3\u003eNPX 300 without changing the architecture\u003c\/h3\u003e\n\u003cp\u003eNSC 222 can be powered by NPX 300, which bypasses the internal supply and separates power delivery from streaming and preamplification duties. The rest of the system remains unchanged: NAP 250 continues as the natural stereo power amplifier for the 200 Series. The front display and Zigbee remote also keep essential functions accessible without requiring a phone or tablet for every change.  Its integrated MM stage and headphone amplifier are what most clearly distinguish it from the source-only NSS 333.  The result is a genuinely compact two-box route into New Classic.\u003c\/p\u003e","brand":"Naim","offers":[{"title":"Default Title","offer_id":42695486243005,"sku":"00-002-0073","price":6400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/naim-nsc-222-front-hmgoi.jpg?v=1790752411"},{"product_id":"preamplificatore-stereo-nu-vista-pre","title":"Musical Fidelity NuVista PRE","description":"\u003ch2\u003eTwelve sources and two chassis at the centre of the system\u003c\/h2\u003e\n\u003cp\u003eNu-Vista PRE is a balanced dual-mono preamplifier with separate supply and twelve line inputs.\u003c\/p\u003e\n\u003cp\u003eNu-Vista PRE separates control and power supply into two chassis to become the centre of a reference chain. Six RCA and six XLR inputs accept twelve analogue sources, while fixed and variable outputs on both formats serve power amplifiers, recording and parallel systems. Eight 6S51N Nuvistors form balanced buffers and the output stages operate in pure Class A. It cannot drive loudspeakers: PAS, two PAM units or another compatible power amplifier are required.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-chassis preamplifier\u003c\/li\u003e\n  \u003cli\u003eSix RCA and six XLR inputs\u003c\/li\u003e\n  \u003cli\u003eEight Nuvistors in balanced buffers\u003c\/li\u003e\n  \u003cli\u003eFixed and variable RCA\/XLR outputs\u003c\/li\u003e\n  \u003cli\u003eTrigger in\/out and remote control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy twelve inputs\u003c\/h3\u003e\n\u003cp\u003eDAC, phono stage, tuner, recorder and professional sources can remain connected without external switching. XLR suits long runs and balanced equipment; RCA maintains broad compatibility. The quantity has value only in a genuinely elaborate system.\u003c\/p\u003e\n\n\u003ch3\u003ePower outside the audio chassis\u003c\/h3\u003e\n\u003cp\u003eThe second case moves transformers and mains current away from low-level signals. Pre and supply weigh 22 and 25 kg respectively; they are not casual stacking accessories and need checked load capacity, ventilation and rack layout.\u003c\/p\u003e\n\n\u003ch3\u003ePAS or two PAM units\u003c\/h3\u003e\n\u003cp\u003ePAS supplies two 300 W channels with one audio amplifier and its external supply. A pair of PAM units assigns 600 W and two chassis to each channel, requiring four boxes for power alone. PRE controls either architecture.\u003c\/p\u003e\n\n\u003ch3\u003eClass A where it matters\u003c\/h3\u003e\n\u003cp\u003eThe Class A output stage drives cables and amplifier inputs, not loudspeakers. Low power demand allows linearity to take priority, while the power amplifier provides current. Trigger in\/out coordinates an otherwise complex system.\u003c\/p\u003e\n\n\u003ch3\u003eIntended owner\u003c\/h3\u003e\n\u003cp\u003eIt makes sense when sources and power stages already match its level and each block should remain independently upgradeable. 800.2 combines control and power to save space. PRE buys flexibility and isolation rather than economical convenience. Complexity pays only with a clear map of sources, outputs and triggers. Labels, balanced wiring and power sequence should be designed together: a reference preamplifier must simplify daily use rather than make it fragile. For Nu-Vista PRE, dimensions, weight, ventilation, connections and system capacity should be checked as one project, leaving operating margin instead of using every specification at its limit. A trial in the actual chain remains more useful than conclusions drawn from one technical figure.\u003c\/p\u003e\n","brand":"Musical Fidelity","offers":[{"title":"Black","offer_id":46518441050456,"sku":"08806168238","price":18800.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":46518441083224,"sku":"08806168003","price":18800.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/musical-fidelity-nu-vista-pre-nero-8fl7n.jpg?v=1789571134"},{"product_id":"preamplificatore-stereo-integrato-p6","title":"Parasound P6","description":"\u003ch3\u003e Stereo preamplifier with DAC\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003eDAC Reference ESS Saber32\u003c\/strong\u003e (ES9018K2M)\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003e400 Watts\u003c\/strong\u003e x 3 @ 4 Ohms\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eClass A\/AB\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eAsynchronous USB 2.0, \u003cstrong\u003eresolution up to 384kHZ \/ 32bit\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003eDigital and coaxial inputs with resolution up to 192kHz \/ 24bit\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n \u003cli\u003e\u003cem\u003ePhono input \u003cstrong\u003efor MM, MC and MI cartridges\u003c\/strong\u003e (100 Ω or 47k Ω)\u003c\/em\u003e\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eHeadphone amplifier\u003c\/em\u003e\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Parasound","offers":[{"title":"Black","offer_id":46683501429080,"sku":"PAP6AMPB","price":4690.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/parasound-p6-nero-v3nue.jpg?v=1791967376"},{"product_id":"preamplificatore-stereo-jc2-bp","title":"Parasound JC2BP","description":"\u003ch3\u003e Stereo preamplifier\u003c\/h3\u003e\n\n\u003cul\u003e\n\n \u003cli\u003e\u003cem\u003e\u003cstrong\u003e6 pairs of \u003cspan style=\"text-decoration: underline;\"\u003eunbalanced\u003c\/span\u003e RCA inputs\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003e2 pairs of parallel XLR jack inputs\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003e4 pairs of jack outputs, \u003cspan style=\"text-decoration: underline;\"\u003eincluding balanced XLRs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eDual-mono design to \u003cstrong\u003eminimize cross-talk\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003eTheater ByPass function\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eCircuit designed by John Curl\u003c\/em\u003e\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Parasound","offers":[{"title":"Black","offer_id":46675447447896,"sku":"791084201126","price":8500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/parasound-jc2bp-nero-uu4gz.jpg?v=1791966934"},{"product_id":"preamplificatore-stereo-new-classic-200-pre","title":"Parasound 200 Preamp","description":"\u003cp\u003eStereo preamplifier with DAC\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003eBurr-Brown DAC\u003c\/strong\u003e with \u003cstrong\u003eup to 192kHz\/24-bit\u003c\/strong\u003e resolution (same as Halo 5).\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003eUSB, Optical and Coaxial inputs.\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003e4 analog audio inputs\u003c\/strong\u003e .\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003e\u003cstrong\u003ePhono input for MM or MC cartridges\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cem\u003e\u003cstrong\u003eAvailable in Black finish.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Parasound","offers":[{"title":"Default Title","offer_id":46675705921880,"sku":"PA200PREB","price":1990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/parasound-200-preamp-uvwmh.jpg?v=1791967014"},{"product_id":"preamplificatore-stereo-p5-series-2-rotel","title":"Rotel Michi P5 S2","description":"\u003ch2\u003eMichi preamplification with dual ESS DACs and a balanced signal path\u003c\/h2\u003e\n\n\u003cp\u003eMichi P5 Serie 2 is a reference preamplifier with two ESS ES9028PRO DACs, XLR inputs, PC-USB, Bluetooth aptX™ HD and a selectable MM\/MC phono stage.\u003c\/p\u003e\n\n\u003cp\u003eThe second generation of P5 brings analogue, digital and vinyl sources together in one chassis, keeping sensitive signal paths separated and assigning conversion to two ESS DACs configured in mono. The dedicated power supply and balanced topology support a high-level system, while PC-USB, MQA, Roon Tested and Bluetooth extend compatibility with contemporary sources.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 8-channel ESS SABRE ES9028PRO DACs configured in mono.\u003c\/li\u003e\n  \u003cli\u003eAnalogue RCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eSelectable phono stage for MM and MC cartridges.\u003c\/li\u003e\n  \u003cli\u003ePC-USB up to 32-bit\/384 kHz with DSD via DoP and MQA.\u003c\/li\u003e\n  \u003cli\u003eCoaxial and optical digital inputs up to 24-bit\/192 kHz.\u003c\/li\u003e\n  \u003cli\u003eBluetooth with aptX™ HD and AAC.\u003c\/li\u003e\n  \u003cli\u003eRoon Tested certification.\u003c\/li\u003e\n  \u003cli\u003eRCA and XLR preamplifier outputs for stereo or mono power amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDual ESS DACs\u003c\/h3\u003e\n\u003cp\u003eP5 Serie 2 uses two 8-channel ESS SABRE ES9028PRO DACs, one dedicated to the left side and one to the right. The mono configuration uses several converter sections in parallel to reduce noise and distortion.\u003c\/p\u003e\n\n\u003ch3\u003eBalanced analogue signal path\u003c\/h3\u003e\n\u003cp\u003eThe XLR inputs maintain a balanced connection with compatible sources alongside conventional RCA. The line section has a declared response from 10 Hz to 100 kHz within ±0.3 dB and signal-to-noise ratio up to 116 dB, figures suited to a preamplifier designed for reference power amplification.\u003c\/p\u003e\n\n\u003ch3\u003eMM and MC phono\u003c\/h3\u003e\n\u003cp\u003eThe phono stage can be switched for moving-magnet or moving-coil cartridges, with sensitivities of 2.5 mV and 250 µV respectively. A turntable therefore connects directly to P5 Serie 2 without an external phono preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003ePC-USB and high resolution\u003c\/h3\u003e\n\u003cp\u003eThe PC-USB input operates in USB Audio Class 2 up to 32-bit\/384 kHz and supports DSD via DoP, as well as MQA and MQA Studio. Computers and streamers can therefore use the internal conversion directly.\u003c\/p\u003e\n\n\u003ch3\u003eDigital inputs\u003c\/h3\u003e\n\u003cp\u003eCoaxial and optical connections accept LPCM signals up to 24-bit\/192 kHz. Together with PC-USB, they centralise players, streamers and other sources on the dual ESS DACs.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and Roon\u003c\/h3\u003e\n\u003cp\u003eBluetooth supports aptX™ HD and AAC for wireless listening from compatible devices, while Roon Tested certification verifies integration with Roon. Wireless functions complement the wired connections.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs and control\u003c\/h3\u003e\n\u003cp\u003eThe preamplifier outputs operate at a nominal 1 V on RCA and 2 V on XLR, allowing stereo or monoblock power amplifiers to be connected. Tone controls offer ±10 dB adjustment and can be bypassed when a more direct path is preferred, retaining flexible control of tonal balance.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply and construction\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 485 x 150 x 452 mm and weighs 22.9 kg. The power supply separates the analogue and digital sections, while Michi construction uses a rigid structure with a colour front display, keeping control, conversion and preamplification within a mechanically stable component.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration in the Michi range\u003c\/h3\u003e\n\u003cp\u003eP5 Serie 2 is designed to drive Michi power amplifiers such as S5 or a pair of M8s, using the balanced outputs for a fully XLR signal chain. Its comprehensive connectivity also allows integration into mixed systems.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":46778304954712,"sku":"00206291238","price":4000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-p5-s2-8or7i.jpg?v=1789027483"},{"product_id":"tangent-preamp-iii","title":"Tangent PreAmp III","description":"\u003ch2\u003eCompact stereo preamplifier with built-in DAC\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTangent PreAmp III\u003c\/strong\u003e is a \u003cstrong\u003estereo preamplifier\u003c\/strong\u003e designed to act as an elegant, flexible control centre in \u003cstrong\u003ecompact Hi-Fi\u003c\/strong\u003e systems and advanced desktop set-ups. It incorporates a quality \u003cstrong\u003eDAC\u003c\/strong\u003e section for handling digital sources, maintaining a signal path that is \u003cstrong\u003eclean\u003c\/strong\u003e, \u003cstrong\u003estable\u003c\/strong\u003e and geared towards maximum \u003cstrong\u003esonic transparency\u003c\/strong\u003e. Its small format allows discreet integration without giving up a full set of features.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/3_1be89041-c9fe-4844-96ef-ea7c7241c162_600x600.webp?v=1768491761\" alt=\"Tangent-PreAmp-III-01\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eDigital conversion and advanced wireless connectivity\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003edigital-to-analogue\u003c\/strong\u003e conversion section delivers accurate reproduction of digital content, improving \u003cstrong\u003edefinition\u003c\/strong\u003e, \u003cstrong\u003emicro-detail\u003c\/strong\u003e and \u003cstrong\u003etonal coherence\u003c\/strong\u003e compared with the built-in outputs of the sources. The \u003cstrong\u003eBluetooth aptX HD\u003c\/strong\u003e module allows \u003cstrong\u003ehigh-quality\u003c\/strong\u003e wireless streaming, ensuring stable transmission and sound superior to the traditional Bluetooth standard. A practical solution for everyday listening without compromise.\u003c\/p\u003e\n\u003ch2\u003eSignal control and integration into stereo systems\u003c\/h2\u003e\n\u003cp\u003eDesigned to drive \u003cstrong\u003epower amplifiers\u003c\/strong\u003e or \u003cstrong\u003eactive amplifiers\u003c\/strong\u003e, the Tangent PreAmp III offers \u003cstrong\u003eprecise\u003c\/strong\u003e volume control, orderly source management and quality \u003cstrong\u003eanalogue\u003c\/strong\u003e outputs. The internal architecture is designed to reduce \u003cstrong\u003enoise\u003c\/strong\u003e, \u003cstrong\u003einterference\u003c\/strong\u003e and signal loss, ensuring a solid foundation for essential yet carefully assembled stereo systems. It is the ideal choice for anyone who wants a \u003cstrong\u003emodern\u003c\/strong\u003e, \u003cstrong\u003eversatile\u003c\/strong\u003e preamplifier in keeping with a minimalist Hi-Fi approach.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv tabindex=\"-1\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in DAC\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital inputs\u003c\/td\u003e\n\u003ctd\u003eOptical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalogue inputs\u003c\/td\u003e\n\u003ctd\u003eRCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless connectivity\u003c\/td\u003e\n\u003ctd\u003eBluetooth aptX HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio outputs\u003c\/td\u003e\n\u003ctd\u003eRCA line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume control\u003c\/td\u003e\n\u003ctd\u003eAnalogue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003ePreamplifier for power amplifiers or active units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eCompact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Tangent","offers":[{"title":"Default Title","offer_id":56542937088344,"sku":"TANPREAMPIIIBT","price":219.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/tangent-preamp-iii-3hqha.webp?v=1791981468"},{"product_id":"chord-suzi-pre","title":"Chord Suzi Pre","description":"\u003ch2\u003eCompact preamplifier with phono stage\u003c\/h2\u003e\u003cp\u003eChord Suzi Pre is a compact preamplifier with a built-in phono stage for MM and MC cartridges, with selectable gain and impedance. It is used as a standalone preamplifier or joined directly to the Suzi Amp stereo power amplifier, with which it forms a small pre\/power system.\u003c\/p\u003e\u003cp\u003eThe set of sockets is essential: three stereo RCA inputs, one of them for the turntable, one stereo RCA output and two headphone outputs, 3.5 mm and 6.35 mm. A central control sphere, illuminated in colour, adjusts the volume and selects the input; among the features Chord Electronics also lists the remote control.\u003c\/p\u003e\u003ch2\u003eThe Suzi system\u003c\/h2\u003e\u003cp\u003eSuzi Pre is part of a concept that the manufacturer describes as versatile and that includes the Suzi Amp power amplifier. Together the two units form a compact pre\/power amplifier with phono stage and headphone output, with a turntable and two line sources as inputs. The headphone output delivers 160 mW into 100 Ω.\u003c\/p\u003e\u003cp\u003eChord also lists other configurations of the same system, which concern the power amplifier: Suzi Amp with the Hugo 2 DAC, to obtain a DAC with amplifier, and Suzi Amp with Hugo 2 and the 2go streamer, for an amplifier with DAC and streaming. Suzi Amp, Hugo 2 and 2go are separate units from the Suzi Pre.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eInputs: 1 stereo RCA for turntable (MM\/MC), 2 stereo RCA.\u003c\/li\u003e\u003cli\u003eOutputs: 1 stereo RCA; 2 headphone sockets, 3.5 mm and 6.35 mm.\u003c\/li\u003e\u003cli\u003e12 V DC socket.\u003c\/li\u003e\u003cli\u003ePhono stage: MM\/MC with selectable gain and impedance.\u003c\/li\u003e\u003cli\u003eHeadphone output power: 160 mW into 100 Ω.\u003c\/li\u003e\u003cli\u003eTotal harmonic distortion: 0.0007 % (A-weighted).\u003c\/li\u003e\u003cli\u003eMaximum input voltage: 3.5 V RMS.\u003c\/li\u003e\u003cli\u003eMaximum output voltage: 3.5 V RMS.\u003c\/li\u003e\u003cli\u003eFrequency response: 7 Hz-30 kHz ± 3 dB.\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: 103 dB.\u003c\/li\u003e\u003cli\u003eOperating voltage: 12 V DC.\u003c\/li\u003e\u003cli\u003eControls: central sphere for volume and inputs, remote control.\u003c\/li\u003e\u003cli\u003eFinishes: black and silver.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Chord Electronics Ltd.","offers":[{"title":"Nero","offer_id":57154075394392,"sku":"CHOELESuziPre-BL","price":2599.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":57154075427160,"sku":"CHOELESuziPre","price":2599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/chord-suzi-front-pre.webp?v=1768812489"},{"product_id":"chord-prima","title":"Chord Prima","description":"\u003ch2\u003eAnalogue preamplifier from the Choral range\u003c\/h2\u003e\u003cp\u003eChord Prima is a stereo preamplifier with an analogue signal path and fully balanced circuitry. It is part of the compact-format Choral range and was designed to complement the Etude power amplifiers from Chord Electronics.\u003c\/p\u003e\u003cp\u003eThe chassis is precision-machined from a solid billet of aircraft-grade aluminium. Despite its small footprint, 335 × 170 × 65 mm and 8 kg, the manufacturer presents it as a Chord amplifier in every respect.\u003c\/p\u003e\u003ch2\u003eInputs, outputs and power supply\u003c\/h2\u003e\u003cp\u003eThere are five stereo inputs: one balanced XLR and four unbalanced RCA. The outputs are one balanced XLR and one RCA tape output, with low impedance. The audio circuit provides independent input gain adjustments, and inputs and outputs are buffered.\u003c\/p\u003e\u003cp\u003eThe power supply is a custom ultra-high-frequency switch-mode unit which, according to Chord, charges and discharges energy quickly and efficiently to feed the capacitors when required. It accepts mains voltages from 50 to 260 V AC with automatic switching and consumes 30 W. Volume is handled by an ALPS Blue Velvet potentiometer and cooling is by convection.\u003c\/p\u003e\u003ch2\u003eControls\u003c\/h2\u003e\u003cp\u003eThe Prima is operated from the remote control or from the front panel, where the volume and balance controls are found. The push buttons on top of the unit select the input and the tape line: the latter function allows the tape outputs to be selected for recording from source components.\u003c\/p\u003e\u003cp\u003eAlso on the top panel, a display shows the chosen input and the volume level, and a porthole lets the internal circuit board be seen. The infrared system remote control with batteries and the 10 A IEC mains cable are included.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eInputs: 1 balanced stereo XLR, 4 unbalanced stereo RCA.\u003c\/li\u003e\u003cli\u003eOutputs: 1 balanced stereo XLR, 1 stereo RCA tape output.\u003c\/li\u003e\u003cli\u003eFrequency response: 2.5 Hz-200 kHz ± 3 dB.\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: 93 dB.\u003c\/li\u003e\u003cli\u003eOutput impedance: 100 Ω (short-circuit protected).\u003c\/li\u003e\u003cli\u003eVolume: ALPS Blue Velvet potentiometer.\u003c\/li\u003e\u003cli\u003ePower supply: 50-260 V AC, 50-60 Hz, auto-switching; consumption 30 W.\u003c\/li\u003e\u003cli\u003eDimensions: 335 × 170 × 65 mm (W × D × H).\u003c\/li\u003e\u003cli\u003eWeight: 8 kg.\u003c\/li\u003e\u003cli\u003eFinishes: black and silver.\u003c\/li\u003e\u003cli\u003eIncluded: infrared system remote control with 2 AAA batteries, 10 A IEC mains cable.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Chord Electronics Ltd.","offers":[{"title":"Silver","offer_id":56560718578008,"sku":"CHOELEPRIMA","price":5990.0,"currency_code":"EUR","in_stock":true},{"title":"Nero","offer_id":56560718610776,"sku":"CHOELEPRIMA-B","price":5990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/chord-electronics-ltd-chord-prima-silver-bx4w4.webp?v=1792056123"},{"product_id":"chord-ultima-pre-3","title":"Chord ULTIMA PRE 3","description":"\u003ch2\u003eAnalogue preamplifier from the ULTIMA series\u003c\/h2\u003e\u003cp\u003eChord ULTIMA PRE 3 is a stereo preamplifier with five analogue inputs, two balanced XLR and three unbalanced RCA, and both XLR and RCA outputs. Chord Electronics presents it as a ground-up design that brings together its most recent proprietary power supply technology and an updated circuit layout.\u003c\/p\u003e\u003cp\u003eThe starting point is a low-distortion, high-frequency switch-mode power supply: according to the manufacturer it delivers very low noise and favourable operating conditions for the amplifying stages. The signal path remains analogue, on fully balanced circuitry, with an ALPS Blue Velvet potentiometer for volume and shielding that Chord describes as advanced. Cooling is by convection.\u003c\/p\u003e\u003ch2\u003eInputs, outputs and connections\u003c\/h2\u003e\u003cp\u003eEach of the five inputs has its own buffer stage and is selectively filtered against radio-frequency interference. The line inputs are joined by a balanced stereo XLR AV bypass input, selectable from the front panel, and by a 12 V trigger socket that works as an input or an output.\u003c\/p\u003e\u003cp\u003eTowards the power amplifier there are one stereo XLR output and one stereo RCA output; a 5 V USB Type-A port is there to charge other devices. The inputs accept up to 10 V RMS, the output reaches 17 V RMS and gain is unity (×1). The power supply adapts automatically to mains voltages between 80 and 250 V, and stated consumption is 40 W.\u003c\/p\u003e\u003ch2\u003eFront panel, chassis and Integra legs\u003c\/h2\u003e\u003cp\u003eThe look has been redesigned: at the centre of the front panel sits the circular power sphere, flanked by the new volume control and by the balance and AV bypass selector, both with a revised ergonomic knob design. The chassis is solid aluminium and the top light ring is included.\u003c\/p\u003e\u003cp\u003eThe Integra side legs are included and bring the footprint to 480 × 130 × 340 mm (W × H × D). Gloss black acrylic side blocks are available as an option, reducing the size to 420 × 100 × 340 mm, although the unit can then no longer be stacked; among the options the manufacturer also lists Integra legs in Jett Black or Argent Silver. Weight is 12.7 kg and the IR system remote control is supplied.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eInputs: 2 stereo balanced XLR, 3 stereo unbalanced RCA, 1 stereo balanced XLR AV bypass.\u003c\/li\u003e\u003cli\u003eOutputs: 1 stereo XLR, 1 stereo RCA; 1 × 5 V USB Type-A charging port.\u003c\/li\u003e\u003cli\u003eTrigger: 1 × 12 V socket, input\/output.\u003c\/li\u003e\u003cli\u003eFrequency response: 10 Hz - 200 kHz, ±3 dB.\u003c\/li\u003e\u003cli\u003eTotal harmonic distortion: 0.002 % from 20 Hz to 20 kHz.\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: −105 dB on all inputs.\u003c\/li\u003e\u003cli\u003eChannel separation: 100 dB.\u003c\/li\u003e\u003cli\u003eInput impedance: 100 kΩ; output impedance: 560 Ω.\u003c\/li\u003e\u003cli\u003eMaximum voltage: 10 V RMS input, 17 V RMS output.\u003c\/li\u003e\u003cli\u003eGain: ×1.\u003c\/li\u003e\u003cli\u003ePower supply: 80-250 V AC, auto-switching; consumption 40 W.\u003c\/li\u003e\u003cli\u003eDimensions with the included Integra legs: 480 × 130 × 340 mm (W × H × D).\u003c\/li\u003e\u003cli\u003eDimensions with the optional side blocks (not stackable): 420 × 100 × 340 mm.\u003c\/li\u003e\u003cli\u003eWeight: 12.7 kg.\u003c\/li\u003e\u003cli\u003eFinishes: black or silver.\u003c\/li\u003e\u003cli\u003eIncluded: 10 A IEC mains cable, IR system remote control, 2 AAA batteries.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Chord Electronics Ltd.","offers":[{"title":"Black","offer_id":56560939106648,"sku":"CHOELECHEULTIMA-PRE3BK","price":7990.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":56560939139416,"sku":"CHOELECHEULTIMA-PRE3","price":7990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/chord-electronics-ltd-chord-ultima-pre-3-nero-cf1wk.jpg?v=1792056972"},{"product_id":"chord-ultima-pre-2","title":"Chord ULTIMA PRE 2","description":"\u003ch2\u003eEight inputs for the hub of the system\u003c\/h2\u003e\u003cp\u003eChord ULTIMA PRE 2 is an analogue stereo preamplifier with eight line inputs, four balanced XLR and four unbalanced RCA, plus a headphone output on the front panel. Chord Electronics offers it as the hub of the hi-fi system, relying on extensive connectivity and on minimal colouration of the incoming signal.\u003c\/p\u003e\u003cp\u003eEach input can be selected individually and level-matched to the others: gain is adjustable in six steps, from ×0.5 to ×3. Volume is handled by an ALPS Blue Velvet potentiometer, and the signal path is analogue and fully balanced, with buffer stages at input and output.\u003c\/p\u003e\u003ch2\u003ePower supply and low-noise circuitry\u003c\/h2\u003e\u003cp\u003eThe manufacturer attributes the performance of the PRE 2 to two elements: the latest developments of its switch-mode power supplies, derived from aerospace technologies, and proprietary ultra-low-noise solid-state circuitry. The latter is carefully shielded and built with selected components.\u003c\/p\u003e\u003cp\u003eThe chassis is solid aluminium, convection cooled, with the top light ring included. The power supply adapts automatically to mains voltages between 80 and 250 V and stated consumption is 30 W. The inputs accept up to 10 V RMS and the output reaches 17 V RMS, with an impedance of 100 Ω.\u003c\/p\u003e\u003ch2\u003eOutputs, headphones and triggers\u003c\/h2\u003e\u003cp\u003eThe main output is a single stereo pair, available on XLR or RCA: Chord suggests it for one stereo power amplifier such as the ULTIMA 5 or for a pair of mono amplifiers such as the ULTIMA 3. Two unattenuated stereo RCA outputs serve the recording loop and a balanced XLR AV bypass input completes the connections. For personal and late-night listening there is a 6.35 mm headphone output on the front panel.\u003c\/p\u003e\u003cp\u003eTo start up the connected equipment together from a single button press the PRE 2 has three trigger outputs, which according to the manufacturer are enough for most systems. The Integra side legs are included: with the legs the preamplifier measures 480 × 173 × 355 mm (W × H × D), without them 420 × 133 × 355 mm. Weight is 18 kg and the metal IR remote control is supplied.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eInputs: 4 stereo balanced XLR (Line In 1-4); 4 stereo unbalanced RCA (Line In 5, Line In 6, Tape 1, Tape 2); 1 stereo balanced XLR AV bypass.\u003c\/li\u003e\u003cli\u003eOutputs: 1 stereo, on balanced XLR or unbalanced RCA; 2 unattenuated stereo RCA for the recording loop.\u003c\/li\u003e\u003cli\u003eHeadphone output: 6.35 mm, on the front panel.\u003c\/li\u003e\u003cli\u003eTrigger: 12 V, input\/output.\u003c\/li\u003e\u003cli\u003eFrequency response: 10 Hz - 200 kHz, ±3 dB.\u003c\/li\u003e\u003cli\u003eTotal harmonic distortion: 0.002 % from 20 Hz to 20 kHz.\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: −116 dB on all inputs.\u003c\/li\u003e\u003cli\u003eChannel separation: 100 dB.\u003c\/li\u003e\u003cli\u003eInput impedance: 100 kΩ; output impedance: 100 Ω.\u003c\/li\u003e\u003cli\u003eMaximum voltage: 10 V RMS input, 17 V RMS output.\u003c\/li\u003e\u003cli\u003eSelectable gain: ×0.5, ×1, ×1.5, ×2, ×2.5 and ×3.\u003c\/li\u003e\u003cli\u003ePower supply: 80-250 V AC, auto-switching; consumption 30 W.\u003c\/li\u003e\u003cli\u003eDimensions with the included Integra legs: 480 × 173 × 355 mm (W × H × D).\u003c\/li\u003e\u003cli\u003eDimensions without Integra legs: 420 × 133 × 355 mm.\u003c\/li\u003e\u003cli\u003eWeight: 18 kg.\u003c\/li\u003e\u003cli\u003eFinishes: black or silver.\u003c\/li\u003e\u003cli\u003eIncluded: 10 A IEC mains cable, metal IR system remote control, 2 AAA batteries.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Chord Electronics Ltd.","offers":[{"title":"Black","offer_id":56562204803416,"sku":"CHOELEULTIMA-PRE2-B","price":20250.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":56562204836184,"sku":"CHOELEULTIMA-PRE2","price":20250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/chord-electronics-ltd-chord-ultima-pre-2-nero-cgt1b.jpg?v=1792057048"},{"product_id":"chord-ultima-pre","title":"Chord ULTIMA PRE","description":"\u003ch2\u003eThe Chord reference preamplifier\u003c\/h2\u003e\u003cp\u003eChord ULTIMA PRE is the preamplifier at the top of the Chord Electronics range: a double-height analogue unit with eight stereo inputs and three stereo outputs, created to partner the ULTIMA mono power amplifier. The manufacturer's stated aim is to add nothing to, and take nothing away from, the incoming signal.\u003c\/p\u003e\u003cp\u003eConstruction is true dual mono: each channel has its own ultra-high-frequency switch-mode power supply, a choice made to obtain the greatest channel separation, stated as 100 dB. This is joined by low-noise, fully balanced circuitry, with buffer stages at input and output and an ALPS Blue Velvet potentiometer for volume.\u003c\/p\u003e\u003ch2\u003eConnections and adjustments\u003c\/h2\u003e\u003cp\u003eThe line inputs are four balanced XLR and four unbalanced RCA, joined by a balanced XLR AV bypass input. The three stereo outputs are selectable and available on both XLR and RCA; gain is adjustable in six steps, from ×0.5 to ×3, and a 12 V trigger works as an input or an output.\u003c\/p\u003e\u003cp\u003eOn the fascia there are separate equalisation controls for the left and right channels, which according to Chord extend flexibility when matching partnering equipment. The headphone outputs are there for personal and late-night listening. The metal IR remote control is supplied.\u003c\/p\u003e\u003ch2\u003eHand-made in Kent\u003c\/h2\u003e\u003cp\u003eEach ULTIMA PRE is hand-made in the Kent factory, and the various stages of build and production are overseen by a single skilled technician. The most sensitive parts of the circuit are protected against radio-frequency interference by shields milled from solid aluminium.\u003c\/p\u003e\u003cp\u003eThe enclosure is UK-produced aircraft-grade aluminium, which Chord describes as solid and resonance-eliminating, with convection cooling and the top light ring included. The Integra side legs are included: with the legs the preamplifier measures 480 × 350 × 355 mm (W × H × D), without them 420 × 310 × 355 mm. Weight is 30 kg.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eInputs: 4 stereo balanced XLR (Line In 1-4); 4 stereo unbalanced RCA (Line In 5, Line In 6, Tape 1, Tape 2); 1 stereo balanced XLR AV bypass.\u003c\/li\u003e\u003cli\u003eOutputs: 3 selectable stereo outputs, on balanced XLR or unbalanced RCA.\u003c\/li\u003e\u003cli\u003eHeadphone outputs: fitted.\u003c\/li\u003e\u003cli\u003eTrigger: 12 V, input\/output.\u003c\/li\u003e\u003cli\u003eFrequency response: 10 Hz - 200 kHz, ±3 dB.\u003c\/li\u003e\u003cli\u003eTotal harmonic distortion: 0.002 % from 20 Hz to 20 kHz.\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: −120 dB on all inputs.\u003c\/li\u003e\u003cli\u003eChannel separation: 100 dB.\u003c\/li\u003e\u003cli\u003eInput impedance: 100 kΩ; output impedance: 100 Ω.\u003c\/li\u003e\u003cli\u003eMaximum voltage: 10 V RMS input, 17 V RMS output.\u003c\/li\u003e\u003cli\u003eSelectable gain: ×0.5, ×1, ×1.5, ×2, ×2.5 and ×3.\u003c\/li\u003e\u003cli\u003ePower supply: 80-250 V AC, auto-switching; consumption 60 W.\u003c\/li\u003e\u003cli\u003eDimensions with the included Integra legs: 480 × 350 × 355 mm (W × H × D).\u003c\/li\u003e\u003cli\u003eDimensions without Integra legs: 420 × 310 × 355 mm.\u003c\/li\u003e\u003cli\u003eWeight: 30 kg.\u003c\/li\u003e\u003cli\u003eFinishes: black or silver.\u003c\/li\u003e\u003cli\u003eIncluded: 10 A IEC mains cable, metal IR system remote control, 2 AAA batteries.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Chord Electronics Ltd.","offers":[{"title":"Black","offer_id":56563697156440,"sku":"CHOELEULTIMA-PRE-B","price":49490.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":56563697189208,"sku":"CHOELEULTIMA-PRE","price":49490.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/chord-electronics-ltd-chord-ultima-pre-nero-bam89.jpg?v=1792055807"},{"product_id":"pre-box-s3","title":"Pro-Ject Pre Box S3","description":"\u003cp\u003e\u003cstrong\u003eA compact stereo preamplifier with a built-in D\/A converter: it gathers analogue, digital and Bluetooth sources, an MM turntable and the television included, and feeds them to a power amplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePre Box S3: inputs and conversion\u003c\/h2\u003e\n\u003cp\u003eThe Pre Box S3 is meant to be the control centre of a modern system in very little space. It has nine inputs: two RCA line inputs and a phono input for MM cartridges on the analogue side; coaxial, two Toslink optical, asynchronous USB-C, HDMI eARC for the television and Bluetooth 5.0 with aptX and aptX HD on the digital side. A turntable, a CD transport, a streamer and the TV can therefore share one unit, with source selection from the supplied remote control.\u003c\/p\u003e\n\u003cp\u003eConversion is handled by a Cirrus Logic CS4344 accepting signals up to 24 bit and 192 kHz, with careful internal clocking to keep jitter low. The analogue stage is a low-noise design with short signal paths, and the digital section is kept strictly apart from the analogue one so that noise from the former cannot reach the latter. The Italian distributor's list also mentions a dual mono layout and an all-aluminium chassis.\u003c\/p\u003e\n\u003cp\u003eRound the back there is a variable-level RCA output for the power amplifier, a fixed output on a 3.5 mm mini-jack for an external headphone amplifier or a second zone, and an RCA output reserved for a subwoofer. The 6.3 mm headphone socket on the front suits models from 16 to 600 ohms. A 12 V trigger output switches partnering equipment on and off, and an RS232 port serves custom-installation control systems.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eFrequency response: 20 Hz to 20 kHz within 0.4 dB\u003c\/li\u003e\u003cli\u003eGain: 4.5 dB on line inputs, 45 dB on phono\u003c\/li\u003e\u003cli\u003eChannel separation: 72 dB at 10 kHz\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: 110 dB (120 dB A-weighted)\u003c\/li\u003e\u003cli\u003eHarmonic distortion (THD): below 0.007%\u003c\/li\u003e\u003cli\u003eHeadphone stage: 6.3 mm jack, 2 x 70 mW into 32 ohms, for 16 to 600 ohm headphones\u003c\/li\u003e\u003cli\u003eAnalogue inputs: 2 RCA line and 1 RCA phono for MM\u003c\/li\u003e\u003cli\u003eDigital inputs: coaxial RCA, 2 Toslink optical, asynchronous USB-C, HDMI eARC, Bluetooth\u003c\/li\u003e\u003cli\u003eBluetooth: version 5.0 with aptX and aptX HD (A2DP)\u003c\/li\u003e\u003cli\u003eDAC chip: Cirrus Logic CS4344, 24 bit \/ 192 kHz\u003c\/li\u003e\u003cli\u003eOutputs: variable RCA, fixed on 3.5 mm mini-jack, RCA for subwoofer\u003c\/li\u003e\u003cli\u003eControl: 12 V trigger output on 2.5 mm jack, RS232 on a 3-pole terminal block\u003c\/li\u003e\u003cli\u003ePower: 18 V \/ 500 mA DC from a 100-240 V mains adapter\u003c\/li\u003e\u003cli\u003eStandby consumption: below 0.5 W\u003c\/li\u003e\u003cli\u003eDimensions: 206 x 55 x 153 mm (width, height, depth), 176 mm deep including sockets\u003c\/li\u003e\u003cli\u003eWeight: 1020 g, power supply excluded\u003c\/li\u003e\u003cli\u003eFinishes: black, silver\u003c\/li\u003e\u003c\/ul\u003e","brand":"Pro-Ject","offers":[{"title":"Nero","offer_id":56617026847064,"sku":"01006888238","price":599.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":56617026879832,"sku":"01006888003","price":599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/pro-ject-pre-box-s3-nero-yal06.jpg?v=1792396015"},{"product_id":"sc-15-prisma","title":"Primare SC15 Prisma","description":"\u003ch2\u003ePrimare SC15 Prisma: a stereo preamplifier with network audio player\u003c\/h2\u003e\n\u003cp\u003eSC15 Prisma is a preamplifier and network player.The D\/A converter is an AKM AK4490 accepting signals up to 384 kHz\/24 bit and DSD 256. Streaming runs over Ethernet or WiFi, with Bluetooth, AirPlay, integrated Chromecast, Spotify Connect and a dedicated app.\u003c\/p\u003e\n\u003cp\u003eThe digital inputs are three optical, one RCA, one on a 3.5 mm socket and one USB-B, plus a USB-A socket; there is one analog input, on RCA. Outputs are one variable RCA and one digital RCA. It also has an RS-232 port, a 12 V trigger, IR sockets, an OLED display and the C25 remote. Measurements: width 350 mm, height 73 mm, depth 330 mm. Finishes: Black and Titanium.\u003c\/p\u003e","brand":"Primare","offers":[{"title":"Black","offer_id":56617831727448,"sku":"00404937001","price":1402.5,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":56617831760216,"sku":"00404937035","price":1402.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/primare-sc-15-prisma-nero-as2r7.jpg?v=1789393777"},{"product_id":"mercury-pre-amp-dac","title":"Rega Mercury Pre-Amp\/DAC","description":"\u003ch2\u003eThe art of silence\u003c\/h2\u003e\n\n\u003cp\u003eRega Mercury is an ultra-low-noise Reference preamplifier with discrete symmetrical circuitry, integrated DAC, digital inputs, headphone output and colour IPS display.\u003c\/p\u003e\n\n\u003cp\u003eMercury was developed as an uncompromising preamplifier, with particular attention to reducing the noise floor and preserving the smallest signal details. The main analogue path uses discrete symmetrical circuitry, while the digital section integrates a high-performance DAC fed by USB and S\/PDIF inputs. A discrete headphone amplifier, an RK27 Blue Velvet volume control by Alps, colour IPS display and backlit Orbit remote control complete the specification.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDiscrete symmetrical circuitry in the main signal path\u003c\/li\u003e\n  \u003cli\u003eIntegrated high-performance DAC\u003c\/li\u003e\n  \u003cli\u003eCoaxial and optical S\/PDIF digital inputs\u003c\/li\u003e\n  \u003cli\u003eGalvanically isolated asynchronous USB input\u003c\/li\u003e\n  \u003cli\u003eBalanced and unbalanced analogue inputs and outputs\u003c\/li\u003e\n  \u003cli\u003eDiscrete headphone amplifier\u003c\/li\u003e\n  \u003cli\u003eColour IPS display\u003c\/li\u003e\n  \u003cli\u003eBacklit Orbit remote control\u003c\/li\u003e\n  \u003cli\u003eStandby mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSymmetrical preamplification\u003c\/h3\u003e\n\u003cp\u003eThe analogue circuit uses discrete differential stages with high linearity and wide bandwidth. Critical stages employ ultra-low-noise FET transistors and complementary Class A output sections, while volume control is handled by the Alps Blue Velvet RK27 potentiometer. The main outputs use DC coupling and are protected by dedicated circuits, with the aim of avoiding coupling capacitors in the output path.\u003c\/p\u003e\n\n\u003ch3\u003eDAC and digital inputs\u003c\/h3\u003e\n\u003cp\u003eThe asynchronous USB input has its own power supply and galvanic isolation, with reclocking of PCM and DSD data and clocks. The S\/PDIF section uses a Wolfson digital receiver and PLL circuit for clock recovery, while conversion is handled by two Wolfson DACs connected in parallel. The analogue signal leaving the DAC is then managed by filters and symmetrical amplification stages consistent with the analogue-section architecture.\u003c\/p\u003e\n\n\u003ch3\u003eHeadphone output and system control\u003c\/h3\u003e\n\u003cp\u003eThe headphone amplifier adopts the symmetrical common-base topology used in the main stages and is designed to drive headphones of low as well as high impedance. The IPS display clearly shows status and selected source, while the Orbit remote control provides operation from a distance. RCA and XLR analogue connections and automatic standby allow Mercury to integrate into complex systems without sacrificing ease of use.\u003c\/p\u003e\n\n\u003ch3\u003eSupplied accessories\u003c\/h3\u003e\n\u003cp\u003eThe Orbit remote control and Rega Reference mains lead are included.\u003c\/p\u003e\n","brand":"Rega","offers":[{"title":"Default Title","offer_id":56637448225112,"sku":"AMP-MERCURY-BLK-EU","price":7920.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rega-mercury-pre-amp-dac-front-apnoc.jpg?v=1791042084"},{"product_id":"naim-nac-332","title":"Naim NAC 332","description":"\u003ch2\u003eThe analogue centre of the 300 Series, with eight inputs and resistor volume control\u003c\/h2\u003e\n\u003cp\u003eNaim NAC 332 is the New Classic 300 preamplifier with XLR, DIN and RCA inputs, Class-A headphone amplification and optional NPX 300 power.\u003c\/p\u003e\n\u003cp\u003eThe single Naim NAC 332 is the analogue control point of a 300 Series system: it accepts NSS 333 as the network source and drives a pair of NAP 350 monoblocks through balanced XLR outputs. Its role differs from NSC 222 because there is no streamer inside; instead it provides more analogue inputs, broader output flexibility and dedicated preamplifier architecture.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eEight analogue inputs: two XLR pairs, three RCA pairs, two 5-pin DIN and one 8-pin DIN\u003c\/li\u003e\u003cli\u003ePreamplifier outputs on balanced XLR and RCA\u003c\/li\u003e\u003cli\u003eFront 6.35 mm headphone socket with 1.5 W into 16 ohms\u003c\/li\u003e\u003cli\u003eFixed-resistor volume control switched by reed relays, derived from Statement architecture\u003c\/li\u003e\u003cli\u003eAdjustable input sensitivity and configurable maximum volume\u003c\/li\u003e\u003cli\u003ePowered 8-pin DIN socket for direct connection of NVC TT phono stage\u003c\/li\u003e\u003cli\u003eBi-directional communication with NSS 333 and System Automation for New Classic power amplifiers\u003c\/li\u003e\u003cli\u003eCompatible with NPX 300 and Super Lumina cabling\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eMore modular than NSC 222\u003c\/h3\u003e\n\u003cp\u003eNSC 222 is a 200 Series streaming preamplifier intended to reduce box count; NAC 332 follows a separated approach. Streaming therefore requires a source such as NSS 333, but the reward is a larger analogue input complement and a control architecture intended for systems where each function has its own component.\u003c\/p\u003e\n\u003ch3\u003eNVC TT without a separate supply\u003c\/h3\u003e\n\u003cp\u003eThe powered 8-pin DIN can supply an NVC TT directly, allowing the phono stage to join the system without NPX TT. A dedicated NPX TT can be added later if independent phono-stage power is preferred, while NAC 332 continues to act solely as the control and preamplification stage.\u003c\/p\u003e\n\u003ch3\u003eFrom NAC 332 to a pair of NAP 350s\u003c\/h3\u003e\n\u003cp\u003eBalanced XLR outputs provide the natural route to two NAP 350 monoblocks, one per channel. RCA outputs remain available for other amplifier configurations, while New Classic interconnect options also allow integration with earlier Naim generations. Bi-directional communication with NSS 333 also simplifies daily operation, allowing source and preamplifier to behave as a coordinated system while remaining electrically separate.\u003c\/p\u003e","brand":"Naim","offers":[{"title":"Default Title","offer_id":56789478343000,"sku":"00-002-0074","price":8288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/naim-nac-332-front-ngjok.jpg?v=1790752485"},{"product_id":"audiolab-9000q","title":"Audiolab 9000Q","description":"\u003cp\u003e\u003cstrong\u003eStereo preamplifier with DAC, from the 9000 series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e9000Q: the design\u003c\/h2\u003e\n\u003cp\u003eThe 9000Q is the preamplifier of the 9000 series and grows out of the 9000A integrated amplifier, whose approach it follows.\u003c\/p\u003e\n\u003cp\u003eIt has tone controls and signal paths that are balanced from end to end. Its partner is the 9000P power amplifier.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eESS Sabre ES9038Pro DAC\u003c\/li\u003e\u003cli\u003eBluetooth 5.1\u003c\/li\u003e\u003cli\u003e4.3\" IPS LCD display\u003c\/li\u003e\u003cli\u003eDigital inputs: 2 optical, 2 coaxial, PC USB, Bluetooth\u003c\/li\u003e\u003cli\u003eAnalogue inputs: 1 XLR, 3 RCA, MM phono\u003c\/li\u003e\u003cli\u003eAnalogue outputs: 1 XLR, 2 RCA, 1 AUX\u003c\/li\u003e\u003cli\u003eFrequency response: 20 Hz - 20 kHz\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: 117 dB\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 444 × 90 × 328 mm\u003c\/li\u003e\u003cli\u003eWeight: 8 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, silver\u003c\/li\u003e\u003c\/ul\u003e","brand":"Audiolab","offers":[{"title":"Nero","offer_id":56842097983832,"sku":"AL9000QB","price":1555.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":56842098016600,"sku":"AL9000QS","price":1555.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/audiolab-9000q-nero-ikpjo.jpg?v=1791143632"},{"product_id":"triode-evolution-pre","title":"Triode Evolution Pre","description":"\u003cp\u003e\u003cstrong\u003eStereo valve preamplifier.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eEvolution Pre: the design\u003c\/h2\u003e\n\u003cp\u003eThe Evolution Pre is the preamplifier made for the Triode integrated amplifiers that can run as power amps (Evolution, TRZ-300W), and it pairs with power amplifiers from other makers as well.\u003c\/p\u003e\n\u003cp\u003eIt follows the look of the Evolution series: central display, two knobs, black brushed-aluminium front. Supply, inputs, gain and outputs are separate sections; the volume control is electronic, the transformer is an R-core type and the valves are by JJ Electronic.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eValves: 4 × 12AX7\u003c\/li\u003e\u003cli\u003eFrequency response: 16 Hz - 170 kHz (−1 dB)\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio: 90 dB\u003c\/li\u003e\u003cli\u003eInputs: 4 line RCA\u003c\/li\u003e\u003cli\u003eOutputs: 2 RCA · Output impedance: 140 ohms\u003c\/li\u003e\u003cli\u003eRemote control: power, volume, mute, inputs, display dimmer\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 440 × 100 × 320 mm\u003c\/li\u003e\u003cli\u003eWeight: 8 kg\u003c\/li\u003e\u003c\/ul\u003e","brand":"Triode","offers":[{"title":"Default Title","offer_id":57098836541784,"sku":"4521296100428","price":5590.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/triode-evolution-pre-fronte-ghfng.jpg?v=1791180996"},{"product_id":"trinnov-amethyst-b","title":"Trinnov AMETHYST B","description":"\u003c!-- meta_title: Trinnov Amethyst Black - Hi-Fi Preamplifier | Videosell --\u003e\n\u003c!-- meta_description: Trinnov Amethyst Black stereo preamplifier with 12 sources, Optimizer, 24-bit\/192 kHz DAC, HybriD phono stage, streaming and Wi-Fi. --\u003e\n\u003ch2\u003eStereo preamplifier with Optimizer and Black finish\u003c\/h2\u003e\n\u003cp\u003eTrinnov Amethyst Black is a high-end stereo preamplifier integrating digital conversion, network streaming, active crossover functions and Trinnov Optimizer room correction.\u003c\/p\u003e\n\u003cp\u003eThe platform handles twelve digital and analog sources, includes a HybriD phono stage, network and Wi-Fi connectivity, and D\/A conversion up to 24-bit\/192 kHz. Its 64-bit floating-point processing handles high-resolution signals while retaining native sampling rates up to 192 kHz. Product code \u003cstrong\u003eTHOM003691\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStereo preamplifier with twelve digital and analog sources\u003c\/li\u003e\n  \u003cli\u003eTrinnov Optimizer for loudspeakers and room\u003c\/li\u003e\n  \u003cli\u003e24-bit\/192 kHz D\/A converter\u003c\/li\u003e\n  \u003cli\u003e1.8 GHz Intel Dual-Core processor\u003c\/li\u003e\n  \u003cli\u003e64-bit floating-point processing\u003c\/li\u003e\n  \u003cli\u003eMM phono stage with HybriD technology\u003c\/li\u003e\n  \u003cli\u003eNetwork Renderer with Ethernet and Wi-Fi connectivity\u003c\/li\u003e\n  \u003cli\u003eBlack finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptimizer for stereo reproduction\u003c\/h3\u003e\n\u003cp\u003eAmethyst integrates Trinnov Optimizer for measuring and correcting loudspeaker and room response. The guided calibration procedure allows different presets to be created and the main acoustic parameters to be adjusted, while keeping system control within the same preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eDigital inputs and synchronization\u003c\/h3\u003e\n\u003cp\u003eDigital connectivity includes 4 S\/PDIF inputs, two optical and two coaxial, 2 AES3 inputs on XLR, 2 coaxial S\/PDIF outputs and 2 AES3 outputs. Word Clock input and output on BNC are also provided for synchronization with compatible digital sources and equipment.\u003c\/p\u003e\n\n\u003ch3\u003eAnalog inputs and HybriD phono\u003c\/h3\u003e\n\u003cp\u003eThe analog section provides 4 balanced XLR connectors, 4 unbalanced RCA connectors and one stereo RCA input switchable between phono and line. The MM phono stage uses Trinnov HybriD technology, while analog outputs include 4 balanced XLR and 4 unbalanced RCA connectors.\u003c\/p\u003e\n\n\u003ch3\u003eConversion, processing and crossover\u003c\/h3\u003e\n\u003cp\u003eA\/D conversion operates at 24-bit\/96 kHz and D\/A conversion at 24-bit\/192 kHz. The 1.8 GHz Intel Dual-Core processor uses 64-bit floating-point processing; Amethyst also integrates an intelligent two-way active crossover engine for stereo configurations requiring separate band management.\u003c\/p\u003e\n\n\u003ch3\u003eNetwork streaming and control\u003c\/h3\u003e\n\u003cp\u003eThe integrated Network Renderer enables playback from network audio sources and the system includes Ethernet and Wi-Fi connectivity. High-resolution sources up to 192 kHz are processed at their native sampling rate, without systematic conversion to lower sampling frequencies.\u003c\/p\u003e\n\n\u003ch3\u003eFinish, dimensions and power\u003c\/h3\u003e\n\u003cp\u003eThis version uses the Black finish. The chassis measures 441 x 97 x 418 mm and weighs 9.4 kg; stated shipping weight is 14.9 kg. Power is selectable between 230 and 110 V at 50\/60 Hz, stated consumption is 40 W and the standard warranty is 5 years.\u003c\/p\u003e\n","brand":"Trinnov","offers":[{"title":"Default Title","offer_id":57298007621976,"sku":"THOM003691","price":13163.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/trinnov-amethyst-b-4mdzn.jpg?v=1791983388"},{"product_id":"rotel-michi-p430","title":"Rotel Michi P430","description":"\u003ch2\u003eThe digital and analogue control centre of the new Series 4xx\u003c\/h2\u003e\n\u003cp\u003eMichi P430 is a stereo preamplifier with ESS Sabre DAC, MM phono stage, HDMI eARC and comprehensive connectivity, designed to drive a higher-level separate system.\u003c\/p\u003e\n\u003cp\u003eIt is the command source of the Michi Series 4xx: it selects and processes digital music, vinyl and analogue signals before handing them to a power amplifier. The black aluminium chassis, TFT display and dual-mono construction share their language and dimensions with the S430 power amplifier, its natural partner in a separate stereo system.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e32-bit ESS Sabre ES9028PRO DAC\u003c\/li\u003e\n  \u003cli\u003eDual toroidal transformers and dual-mono circuitry\u003c\/li\u003e\n  \u003cli\u003eMM phono input, four RCA and one XLR analogue inputs\u003c\/li\u003e\n  \u003cli\u003e32-bit\/384 kHz USB with DSD and DoP, Roon certification and HDMI eARC\u003c\/li\u003e\n  \u003cli\u003eTwo XLR outputs, RCA pre-out and two subwoofer outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eA preamplifier, not an integrated amplifier\u003c\/h3\u003e\n\u003cp\u003eP430 does not power loudspeakers directly: it organises sources, controls volume and sends a low-noise signal to an external power amplifier. This separation lets the power supply and circuits focus on signal control, leaving the power stage with the sole task of driving loudspeakers.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-resolution digital\u003c\/h3\u003e\n\u003cp\u003eThe ESS Sabre ES9028PRO converter handles the digital section, with a rear USB input up to 32-bit\/384 kHz, DSD and DoP. Six S\/PDIF inputs, three optical and three coaxial, welcome players, streamers and TV; HDMI eARC makes P430 a stereo listening hub for television too.\u003c\/p\u003e\n\n\u003ch3\u003eVinyl, analogue sources and Bluetooth\u003c\/h3\u003e\n\u003cp\u003eThe MM phono stage allows direct connection of a moving-magnet turntable. Four RCA sockets and an XLR input sit alongside Bluetooth with aptX HD and AAC: a provision that keeps analogue and digital paths separate, without giving up everyday sources.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply and dual-mono architecture\u003c\/h3\u003e\n\u003cp\u003eTwo toroidal transformers and dual-mono circuitry help keep the left and right channels separate. The result is a preamplifier designed to preserve microdynamics, soundstage and signal stability, with a technical approach consistent with Michi's more ambitious construction.\u003c\/p\u003e\n\n\u003ch3\u003eThe S430 partner\u003c\/h3\u003e\n\u003cp\u003eP430 and S430 have the same 431 mm chassis, black finish and customisable TFT display, yet perform distinct roles. P430 prepares and distributes the signal; Michi S430 amplifies it to 230 W RMS per channel into 8 ohms. Connected via XLR, they form a tidy, complete separate stereo system.\u003c\/p\u003e\n\n\u003ch3\u003eControl and integration\u003c\/h3\u003e\n\u003cp\u003eA high-resolution TFT display, tone controls, 12 V trigger, Ethernet and RS-232 make integration into an advanced system straightforward. RCA pre-out, two XLR outputs and two subwoofer outputs allow the choice of power amplifier and completion with one or two active subwoofers.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":58483022397784,"sku":null,"price":3590.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-p430-svdy1.jpg?v=1789726656"},{"product_id":"canor-hyperion-p1","title":"Canor Hyperion P1","description":"\u003cp\u003e\u003cstrong\u003eZero-feedback class A valve preamplifier with four XLR and five RCA inputs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eHyperion P1: the design\u003c\/h2\u003e\n\u003cp\u003eIn the Hyperion P1 the volume potentiometer is enclosed in a 10 mm thick aluminium box and galvanically isolated by optical drivers. The circuits are mounted on anti-vibration pillars and a 10 mm aluminium partition separates the analogue section from the power supply.\u003c\/p\u003e\n\u003cp\u003eCanor is a Slovak manufacturer based in Prešov. Many of its components share the proprietary CMT technology for the circuit boards and a solid aluminium chassis designed to stop vibration.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eValves: 4 × 6922, 2 × 6H30PI\u003c\/li\u003e\u003cli\u003eInputs: 4 XLR, 5 RCA\u003c\/li\u003e\u003cli\u003eOutputs: 2 XLR, 2 RCA\u003c\/li\u003e\u003cli\u003eTrigger: in and out\u003c\/li\u003e\u003cli\u003eRemote control: included\u003c\/li\u003e\u003cli\u003eDimensions (W × H × D): 450 × 190 × 465 mm\u003c\/li\u003e\u003cli\u003eWeight: 35 kg\u003c\/li\u003e\u003cli\u003eFinishes: black, silver\u003c\/li\u003e\u003c\/ul\u003e","brand":"Canor","offers":[{"title":"Black","offer_id":58665925378392,"sku":"12205949238","price":11288.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":58665925837144,"sku":"12205949003","price":11288.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/canor-hyperion-p1-nero-1.jpg?v=1791226089"},{"product_id":"roksan-caspian-4g-streaming-pre-amplifier","title":"Roksan Caspian 4G Streaming Pre-Amplifier","description":"\u003ch2\u003eRoksan Caspian 4G Streaming Pre-Amplifier: stereo preamplifier with BluOS streaming\u003c\/h2\u003e\u003cp\u003eThis Roksan preamplifier belongs to the Caspian Series 4G and is the command centre of the system: it looks after source selection, streaming and volume, leaving the task of driving the speakers to a separate power amplifier. Its intended partner is the Caspian 4G Power Amplifier, in a stereo system with one power amplifier or with two of them used as monoblocks.\u003c\/p\u003e\u003cp\u003eThe built-in BluOS platform takes streaming up to 24 bit \/ 192 kHz and as many as 64 zones, with browsing of locally stored music, streaming services and radio. Conversion is entrusted to Rapture DAC technology; the phono stage accepts MM and MC cartridges. Configuration and control run through the MaestroUnite app, and the box includes a Roksan remote control.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBluOS streaming: up to 24 bit \/ 192 kHz, multi-room with as many as 64 zones\u003c\/li\u003e\u003cli\u003eHDMI eARC socket\u003c\/li\u003e\u003cli\u003eBluetooth aptX and MQA compatibility\u003c\/li\u003e\u003cli\u003eRapture DAC digital-to-analogue conversion\u003c\/li\u003e\u003cli\u003ePhono stage for MM and MC cartridges\u003c\/li\u003e\u003cli\u003eRCA, XLR and subwoofer outputs\u003c\/li\u003e\u003cli\u003eDimensions with accessories fitted: height 93 mm, width 432 mm, depth 378 mm\u003c\/li\u003e\u003cli\u003eWeight: 10.1 kg\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eThis preamplifier is sold as a single unit, in Black and Silver finishes.\u003c\/p\u003e","brand":"Roksan","offers":[{"title":"Black","offer_id":58694791102808,"sku":"RKS-CASP4GPREBK","price":4000.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":58694791135576,"sku":"RKS-CASP4GPRESL","price":4000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/roksan-caspian-4g-streaming-pre-amplifier-argento.jpg?v=1791443234"},{"product_id":"hegel-p30a","title":"Hegel P30A","description":"\u003ch2\u003eHegel P30A: reference analogue preamplifier, balanced throughout\u003c\/h2\u003e\u003cp\u003eHegel P30A is the reference preamplifier by Hegel, an analogue unit whose task is to feed the power amplifier a signal that stays as faithful to the source as it can. It uses single pairs of FET transistors, measured and matched by hand so that their values are identical, and very short signal paths: the music crosses just two transistors and a volume attenuator with extremely low noise.\u003c\/p\u003e\u003cp\u003eThe circuit is balanced from input to output: for each channel there are two amplifiers, two volume controls and two SoundEngine modules, the Hegel technology that corrects intermodulation distortion in real time with a feed forward scheme. The fixed-level Home Theatre input lets it join a multichannel system and can also be configured as a normal input. The variable outputs are active all together, so several devices can be connected; one of the two RCA can become a fixed-level one. The remote control adjusts volume, source and mute.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e two balanced XLR, three unbalanced RCA and a Home Theatre input\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e one XLR balanced plus two RCA unbalanced, at variable level\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther connections:\u003c\/strong\u003e direct IR input and 12 V trigger output, both on 3.5 mm jacks\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e above 130 dB in balanced operation\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCrosstalk:\u003c\/strong\u003e below -100 dB\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDistortion:\u003c\/strong\u003e under 0.005%; intermodulation under 0.01%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSize and weight:\u003c\/strong\u003e height 9.6 cm, width 43 cm, depth 30 cm; 7.2 kg\u003c\/li\u003e\u003c\/ul\u003e","brand":"Hegel","offers":[{"title":"Default Title","offer_id":58695959740760,"sku":"HEG-P30A","price":8495.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/hegel-p30a-fronte.jpg?v=1791450769"},{"product_id":"atc-sca2","title":"ATC SCA2","description":"\u003ch2\u003eATC SCA2: class A stereo preamplifier with balanced and unbalanced inputs\u003c\/h2\u003e\u003cp\u003eATC SCA2 is the top-level preamplifier in the ATC catalogue and has been made without interruption since 1996. It is meant to accompany the high-end ATC active loudspeakers and power amplifiers, for example the ATC P2. Inputs and outputs, both balanced and unbalanced, allow it to be connected to a great variety of components.\u003c\/p\u003e\u003cp\u003eThe circuitry is entirely discrete, in class A and low in noise. The high-current output stages keep distortion down with any load and with long cables, while the 500 kHz bandwidth avoids phase rotation. As an option, the internal SPH2 phono card for MC and MM cartridges can be added, with adjustable gain and loading, and it takes up one of the line inputs. The infrared remote control is machined from solid aluminium; the unit is built by hand in the United Kingdom.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e two balanced XLR stereo and six unbalanced RCA stereo; sensitivity 230 mV\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePre outputs:\u003c\/strong\u003e one balanced XLR stereo and one unbalanced RCA stereo\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRecorder outputs:\u003c\/strong\u003e two RCA stereo\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum output level:\u003c\/strong\u003e 17 V RMS balanced and 8.5 V RMS unbalanced, into 600 Ohm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e from DC to above 500 kHz (-3 dB)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHarmonic distortion:\u003c\/strong\u003e lower than 0.0005% at 1 kHz\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e above 108 dB (IEC A); crosstalk beyond 90 dB between 10 Hz and 20 kHz\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSize and weight:\u003c\/strong\u003e height 102 mm, width 440 mm, depth 353 mm; 6.85 kg\u003c\/li\u003e\u003c\/ul\u003e","brand":"ATC","offers":[{"title":"Default Title","offer_id":58696192590168,"sku":"ATC-SCA2","price":10490.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/atc-sca2-fronte.jpg?v=1791452292"},{"product_id":"artsound-pm-2s01","title":"ArtSound PM-2S01","description":"\u003ch2\u003eArtSound PM-2S01: 10-input preamplifier with 2 zone outputs\u003c\/h2\u003e\u003cp\u003eThe PM-2S01 is a preamplifier with ten channels, each of which can be routed to two separate zones. Every channel has an independent volume adjustment and accepts a microphone or another source, so you decide what gets amplified and where.\u003c\/p\u003e\u003cp\u003eThe connections listed by the manufacturer include 9 XLR sockets, 5 MIC\/LINE, 4 RCA and one REC OUT for recording. Every zone has a tone control and an LED level indicator; there are two outputs, on XLR. The functions are completed by priority with VOX activation and by a 2-tone or 4-tone chime. Being a preamplifier, it has to be paired with external amplification. It can be powered from 230 V alternating current or from 24 V direct current.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eInput channels: 10, with individual volume\u003c\/li\u003e\u003cli\u003eZones: 2, with 2 x XLR outputs\u003c\/li\u003e\u003cli\u003eMicrophone inputs: channels 2 to 6 on XLR, 7 to 10 on XLR and RCA\u003c\/li\u003e\u003cli\u003eTone control and LED level indicator: per zone\u003c\/li\u003e\u003cli\u003ePriority: MIC 2 \/ 4 with VOX\u003c\/li\u003e\u003cli\u003eChime: 2-tone or 4-tone\u003c\/li\u003e\u003cli\u003eDirect output: REC, for recording\u003c\/li\u003e\u003cli\u003eSupply: 230 V AC at 50 Hz or 24 V DC; consumption 13 W\u003c\/li\u003e\u003cli\u003eDimensions: 484 mm by 295 mm by 44 mm; weight 3.9 kg per piece\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"ArtSound","offers":[{"title":"Default Title","offer_id":58697962094936,"sku":"ART00007641","price":641.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/artsound-pm-2s01-vista-1.jpg?v=1791464543"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/collections\/C5000SPicUAGBKLVs_2712x1899_84c373fbc66d57136ca56f7a7b9d0004.jpg?v=1649755143","url":"https:\/\/videosell.fr\/collections\/preamplificatori-stereo.oembed","provider":"Videosell store","version":"1.0","type":"link"}