{"title":"Flash offers","description":"","products":[{"product_id":"amplificatore-finale-rotel-rmb1506","title":"Rotel RMB-1506","description":"\u003ch2\u003eSix Class AB channels for home cinema and multi-zone installations\u003c\/h2\u003e\n\n\u003cp\u003eRotel RMB-1506 is a Class AB multichannel power amplifier rated at 50 W per channel into 8 ohms and 80 W per channel into 4 ohms with all channels driven, designed for home cinema systems and distributed audio.\u003c\/p\u003e\n\n\u003cp\u003eThe power supply is sized to support several loudspeakers at the same time, a more demanding condition than testing one channel alone. A large in-house toroidal transformer, high-efficiency capacitors and high-current output transistors provide the required reserve, while discrete circuits and trigger functions simplify installation in racks and dedicated cinema rooms.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSix channels of Class AB amplification.\u003c\/li\u003e\n  \u003cli\u003e50 W per channel into 8 ohms with all channels driven.\u003c\/li\u003e\n  \u003cli\u003e80 W per channel into 4 ohms with all channels driven.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.03%.\u003c\/li\u003e\n  \u003cli\u003eLarge in-house toroidal transformer.\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency capacitors and high-current output transistors.\u003c\/li\u003e\n  \u003cli\u003eRCA inputs with link inputs and buffered output.\u003c\/li\u003e\n  \u003cli\u003eDamping factor above 200.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower with all channels driven\u003c\/h3\u003e\n\u003cp\u003eRMB-1506 delivers 50 W per channel into 8 ohms and 80 W per channel into 4 ohms with all six channels active. The all-channels-driven figure is important in a multichannel system because it describes supply capability when several loudspeakers demand current simultaneously during a dynamic soundtrack.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-current power supply\u003c\/h3\u003e\n\u003cp\u003eA large in-house toroidal transformer supports the power section. Its reserve is sized for simultaneous channel use and reduces the risk that peaks on one loudspeaker take energy from the others, maintaining more stable behaviour across the system.\u003c\/p\u003e\n\n\u003ch3\u003eCapacitors and transients\u003c\/h3\u003e\n\u003cp\u003eHigh-efficiency capacitors and high-current output transistors support transients and bass when effects involve several channels. Low internal resistance helps transfer energy rapidly to the output stages without introducing a slow response under load.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and response\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.03% and frequency response runs from 10 Hz to 100 kHz within ±1 dB. A damping factor above 200 contributes to woofer control, particularly useful when several large loudspeakers are driven in the same room.\u003c\/p\u003e\n\n\u003ch3\u003eInputs and AV processor\u003c\/h3\u003e\n\u003cp\u003eRCA inputs with link inputs and a buffered output connect surround processors and preamplifiers with different outputs. The six channels can serve three stereo zones; front attenuators, 12 V trigger and buffered output simplify expansion to other amplifiers. The power amplifier remains independent of decoding and can be retained when the upstream processor changes.\u003c\/p\u003e\n\n\u003ch3\u003eTrigger and installation\u003c\/h3\u003e\n\u003cp\u003eThe 12 V trigger allows the power amplifier to switch on with the processor or a control system. Installation functions reduce the need for manual intervention when the unit is placed in a technical rack or dedicated cinema room.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and thermal management\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 424 mm and weighs 15.3 kg. Heatsinks, power supply and amplification modules occupy most of the structure and are distributed to encourage cooling while keeping input sections away from the main sources of heat and magnetic field.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":42162231935165,"sku":"00201205001","price":1039.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rmb-1506-7ljkb.jpg?v=1789025526"},{"product_id":"sintonizzatore-rotel-t11","title":"Rotel T-11","description":"\u003ch2\u003eFM and DAB+ radio with sixty presets in a dedicated tuner\u003c\/h2\u003e\n\n\u003cp\u003eRotel T-11 is an FM\/DAB+ tuner with 30 FM presets, 30 DAB+ presets, RDS and adjustable display, designed as a separate radio source for a Hi-Fi system.\u003c\/p\u003e\n\n\u003cp\u003eThe component keeps tuning separate from the amplifier and provides analogue FM and digital DAB+ reception through a single 75-ohm antenna. Presets recall favourite stations quickly, while RDS and the front display show information broadcast by the station without adding streaming functions unrelated to the design.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFM and DAB+ reception.\u003c\/li\u003e\n  \u003cli\u003e30 FM presets and 30 DAB+ presets.\u003c\/li\u003e\n  \u003cli\u003eRDS for information from compatible FM stations.\u003c\/li\u003e\n  \u003cli\u003eDAB Band III from 174 to 240 MHz.\u003c\/li\u003e\n  \u003cli\u003eDAB+ audio bit rate up to 224 kbps.\u003c\/li\u003e\n  \u003cli\u003eDAB+ audio response from 20 Hz to 20 kHz within ±1 dB.\u003c\/li\u003e\n  \u003cli\u003e75-ohm F-type antenna input.\u003c\/li\u003e\n  \u003cli\u003eAdjustable brightness for the display and power LED.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFM and DAB+\u003c\/h3\u003e\n\u003cp\u003eT-11 receives both traditional FM radio and digital DAB+ broadcasts. Switching between the two modes is handled from the same front panel, retaining a single dedicated radio source without relying on an app or internet services for reception.\u003c\/p\u003e\n\n\u003ch3\u003eSixty presets\u003c\/h3\u003e\n\u003cp\u003eThirty memories are available for FM stations and 30 for DAB+, allowing favourite broadcasters to be recalled without repeating a search each time. Keeping the memories separate maintains order between the two transmission systems and speeds up everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eRDS and information\u003c\/h3\u003e\n\u003cp\u003eWith compatible FM stations, RDS displays information such as station name and programme data. The front display therefore shows not only frequency and preset number but also metadata broadcast by the radio network when available.\u003c\/p\u003e\n\n\u003ch3\u003eDAB+ reception\u003c\/h3\u003e\n\u003cp\u003eThe DAB section operates on Band III from 174 to 240 MHz and supports audio bit rates up to 224 kbps. Declared response runs from 20 Hz to 20 kHz within ±1 dB, maintaining the full audio bandwidth of the digital broadcast.\u003c\/p\u003e\n\n\u003ch3\u003eAntenna and installation\u003c\/h3\u003e\n\u003cp\u003eThe 75-ohm F-type antenna connector accepts a dedicated aerial or compatible central distribution system. Reception quality therefore remains linked to the antenna installation, while the tuner handles selection and decoding of the received signal.\u003c\/p\u003e\n\n\u003ch3\u003eAdjustable display\u003c\/h3\u003e\n\u003cp\u003eThe brightness of the display and power LED can be adjusted to suit the room. This is useful when T-11 is installed near a television or in a dark environment, preventing front-panel illumination from becoming dominant.\u003c\/p\u003e\n\n\u003ch3\u003eOutput and integration\u003c\/h3\u003e\n\u003cp\u003eThe tuner provides a line-level signal for connection to a Rotel or third-party amplifier or preamplifier. It does not include a power stage: its role remains that of a dedicated radio source within a separate Hi-Fi chain.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and dimensions\u003c\/h3\u003e\n\u003cp\u003eT-11 measures 430 x 73 x 330 mm and weighs 4.3 kg. The format follows Rotel Series 14 components and allows visual matching with amplifiers in the same range, keeping controls and display aligned across the front panels.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162232328381,"sku":"00204183001","price":349.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162232361149,"sku":"00204183003","price":349.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-t-11-nero-7krli.jpg?v=1789025489"},{"product_id":"amplificatore-finale-rotel-rb1552mkii","title":"Rotel RB-1552 MKII","description":"\u003ch2\u003eStereo Class AB power and a high-current power supply\u003c\/h2\u003e\n\n\u003cp\u003eRotel RB-1552 MKII is a Class AB stereo power amplifier rated at 130 W per channel into 8 ohms and 185 W per channel into 4 ohms, with a toroidal transformer using independent rectifiers for the two channels and RCA and balanced XLR connections.\u003c\/p\u003e\n\n\u003cp\u003eThe design is built around an oversized power supply and discrete output stages intended to drive demanding loudspeakers. Low-ESR slit-foil capacitors support the supply. The internal layout limits interference between the two channels and keeps current paths short, while the available inputs allow use in traditional or balanced stereo chains.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 130 W per channel into 8 ohms.\u003c\/li\u003e\n  \u003cli\u003eContinuous power of 185 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.03%.\u003c\/li\u003e\n  \u003cli\u003eToroidal transformer with independent rectifiers for the two channels.\u003c\/li\u003e\n  \u003cli\u003eLow-ESR slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eDamping factor of 450.\u003c\/li\u003e\n  \u003cli\u003eFrequency response from 10 Hz to 100 kHz within ±0.5 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and drive capability\u003c\/h3\u003e\n\u003cp\u003eRB-1552 MKII delivers 130 W per channel into 8 ohms and 185 W per channel into 4 ohms, retaining suitable reserve as loudspeaker impedance falls. Declared total harmonic distortion remains below 0.03%, accompanying an output section designed to combine current, control and linearity.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eA toroidal transformer with independent rectifiers for the two channels forms the core of the supply. It is sized to support transients without compressing dynamics, because loudspeaker drive depends on available current as much as on nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eEnergy reserve\u003c\/h3\u003e\n\u003cp\u003eLow-ESR slit-foil capacitors are selected to release stored energy quickly and support bass during more demanding passages, while limiting internal losses and supply-voltage variation under load.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe output stage operates in Class AB and declares a frequency response from 10 Hz to 100 kHz within ±0.5 dB. A damping factor of 450 contributes to woofer control and transient precision, while the topology maintains bandwidth wide enough not to constrain the audio signal.\u003c\/p\u003e\n\n\u003ch3\u003eInputs and preamplifier\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs allow connection to preamplifiers with different topologies and output levels. Balanced connections are particularly useful with long cable runs or systems where reducing sensitivity to picked-up noise is important.\u003c\/p\u003e\n\n\u003ch3\u003eLoudspeakers and system control\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker terminals accommodate substantial cable sizes and a 12 V trigger synchronises power with a compatible preamplifier. The internal arrangement is close to dual mono after the transformer and includes 12 V triggering for coordinated power. The amplifier can therefore work in a traditional chain or a centrally controlled system.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and cooling\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 339 mm and weighs 12.4 kg. Much of the mass comes from the transformer, heatsinks and output stages, while the mechanical layout keeps heat-generating components away from the more sensitive input sections.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162233180349,"sku":"00203211001","price":940.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162233213117,"sku":"00203211003","price":940.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rb-1552-mkii-nero-86whg.jpg?v=1789026520"},{"product_id":"amplificatore-finale-rotel-rb-1582-mkii","title":"Rotel RB-1582 MKII","description":"\u003ch2\u003eStereo Class AB power and a high-current power supply\u003c\/h2\u003e\n\n\u003cp\u003eRotel RB-1582 MKII is a Class AB stereo power amplifier rated at 200 W per channel into 8 ohms and 323 W per channel into 4 ohms, with a large toroidal transformer using independent rectifiers for the two channels and RCA and balanced XLR connections.\u003c\/p\u003e\n\n\u003cp\u003eThe design is built around an oversized power supply and discrete output stages intended to drive demanding loudspeakers. A total filter capacity of 60,000 µF uses slit-foil capacitors. The internal layout limits interference between the two channels and keeps current paths short, while the available inputs allow use in traditional or balanced stereo chains.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 200 W per channel into 8 ohms.\u003c\/li\u003e\n  \u003cli\u003eContinuous power of 323 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.03%.\u003c\/li\u003e\n  \u003cli\u003eLarge toroidal transformer with independent rectifiers for the two channels.\u003c\/li\u003e\n  \u003cli\u003eTotal filter capacity of 60,000 µF with slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eDamping factor of 800.\u003c\/li\u003e\n  \u003cli\u003eFrequency response from 10 Hz to 100 kHz within ±0.5 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and drive capability\u003c\/h3\u003e\n\u003cp\u003eRB-1582 MKII delivers 200 W per channel into 8 ohms and 323 W per channel into 4 ohms, retaining suitable reserve as loudspeaker impedance falls. Declared total harmonic distortion remains below 0.03%, accompanying an output section designed to combine current, control and linearity.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eA large toroidal transformer with independent rectifiers for the two channels forms the core of the supply. It is sized to support transients without compressing dynamics, because loudspeaker drive depends on available current as much as on nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eEnergy reserve\u003c\/h3\u003e\n\u003cp\u003eA total filter capacity of 60,000 µF uses slit-foil capacitors. The filtering components release stored energy quickly and support bass during demanding passages while limiting internal losses and supply-voltage variation under load.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe output stage operates in Class AB and declares a frequency response from 10 Hz to 100 kHz within ±0.5 dB. A damping factor of 800 contributes to woofer control and transient precision, while the topology maintains bandwidth wide enough not to constrain the audio signal.\u003c\/p\u003e\n\n\u003ch3\u003eInputs and preamplifier\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs allow connection to preamplifiers with different topologies and output levels. XLR is useful with long cable runs or installations that are more sensitive to noise.\u003c\/p\u003e\n\n\u003ch3\u003eLoudspeakers and system control\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker terminals accommodate substantial cable sizes and a 12 V trigger synchronises power with a compatible preamplifier. After the transformer the two channels follow a near-monoblock arrangement, with star grounding on a copper plate and ten high-current bipolar transistors per channel. The amplifier can therefore work in a traditional chain or a centrally controlled system.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and cooling\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 407 mm and weighs 17.6 kg. Much of the mass comes from the transformer, heatsinks and output stages, while the mechanical layout keeps heat-generating components away from the more sensitive input sections.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162233245885,"sku":"00203212001","price":1479.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162233278653,"sku":"00203212003","price":1479.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rb-1582-mkii-nero-88f48.jpg?v=1789026590"},{"product_id":"amplificatore-finale-rotel-rmb-1555","title":"Rotel RMB-1555","description":"\u003ch2\u003eFive Class AB channels for home cinema and multi-zone installations\u003c\/h2\u003e\n\n\u003cp\u003eRotel RMB-1555 is a Class AB multichannel power amplifier rated at 120 W per channel into 8 ohms and 170 W per channel into 4 ohms with all channels driven, designed for home cinema systems and distributed audio.\u003c\/p\u003e\n\n\u003cp\u003eThe power supply is sized to support several loudspeakers at the same time, a more demanding condition than testing one channel alone. A large high-current toroidal transformer and British-made slit-foil capacitors provide the required reserve, while discrete circuits and trigger functions simplify installation in racks and dedicated cinema rooms.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFive channels of Class AB amplification.\u003c\/li\u003e\n  \u003cli\u003e120 W per channel into 8 ohms with all channels driven.\u003c\/li\u003e\n  \u003cli\u003e170 W per channel into 4 ohms with all channels driven.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.03%.\u003c\/li\u003e\n  \u003cli\u003eLarge high-current toroidal transformer.\u003c\/li\u003e\n  \u003cli\u003eBritish-made slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003eRCA inputs.\u003c\/li\u003e\n  \u003cli\u003eDamping factor of 180.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower with all channels driven\u003c\/h3\u003e\n\u003cp\u003eRMB-1555 delivers 120 W per channel into 8 ohms and 170 W per channel into 4 ohms with all five channels active. The all-channels-driven figure is important in a multichannel system because it describes supply capability when several loudspeakers demand current simultaneously during a dynamic soundtrack.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-current power supply\u003c\/h3\u003e\n\u003cp\u003eA large high-current toroidal transformer supports the power section. Its reserve is sized for simultaneous channel use and reduces the risk that peaks on one loudspeaker take energy from the others, maintaining more stable behaviour across the system.\u003c\/p\u003e\n\n\u003ch3\u003eCapacitors and transients\u003c\/h3\u003e\n\u003cp\u003eBritish-made slit-foil capacitors support transients and bass when effects involve several channels, while low internal resistance helps transfer energy rapidly to the output stages without introducing a slow response under load.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and response\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.03% and frequency response runs from 10 Hz to 100 kHz within +0.5\/-3 dB. A damping factor of 180 contributes to woofer control, particularly useful when several large loudspeakers are driven in the same room.\u003c\/p\u003e\n\n\u003ch3\u003eInputs and AV processor\u003c\/h3\u003e\n\u003cp\u003eRCA inputs connect surround processors and preamplifiers with different outputs. The discrete output stages are designed for thermal stability and rack brackets are included. The power amplifier remains independent of decoding and can be retained when the upstream processor changes.\u003c\/p\u003e\n\n\u003ch3\u003eTrigger and installation\u003c\/h3\u003e\n\u003cp\u003eThe 12 V trigger allows the power amplifier to switch on with the processor or a control system. Installation functions reduce the need for manual intervention when the unit is placed in a technical rack or dedicated cinema room.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and thermal management\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 188 x 454 mm and weighs 21.8 kg. Heatsinks, power supply and amplification modules occupy most of the structure and are distributed to encourage cooling while keeping input sections away from the main sources of heat and magnetic field.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162233475261,"sku":"00203213001","price":1620.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162233508029,"sku":"00203213003","price":1620.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rmb-1555-nero-8cfj7.jpg?v=1789026777"},{"product_id":"lettore-cd-rotel-cd14-mkii","title":"Rotel CD-14 MKII","description":"\u003ch2\u003ePrecise CD playback, dedicated conversion and a low-noise audio path\u003c\/h2\u003e\n\n\u003cp\u003eRotel CD-14 MKII is a CD player with a smooth-tray mechanism and separate power supplies for servo and audio, 32-bit\/384 kHz Texas Instruments DAC and RCA analogue outputs, designed to reproduce optical media through a dedicated chain.\u003c\/p\u003e\n\n\u003cp\u003eThe design separates the mechanism, servo and power supply from the sensitive audio sections. A 32-bit\/384 kHz Texas Instruments DAC converts the signal for the analogue outputs, while a coaxial digital output also allows the player to be used as a transport into an external DAC. Independent supplies isolate motor control from the audio circuits, and a 12 V trigger coordinates power with a Rotel amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCD mechanism with smooth tray and separate power supplies for servo and audio.\u003c\/li\u003e\n  \u003cli\u003e32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003eRCA analogue outputs.\u003c\/li\u003e\n  \u003cli\u003eCoaxial digital output.\u003c\/li\u003e\n  \u003cli\u003eCD and MP3 file playback on compatible media.\u003c\/li\u003e\n  \u003cli\u003eDeclared THD of 0.0035% at 1 kHz.\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio above 118 dB.\u003c\/li\u003e\n  \u003cli\u003e430 x 98 x 314 mm chassis weighing 6.51 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDisc mechanism\u003c\/h3\u003e\n\u003cp\u003eThe CD mechanism uses a smooth tray and separate supplies for servo and audio. The optical assembly and motor are designed to track the disc precisely while limiting vibration and mechanical noise, so the digital signal is extracted under stable conditions before reaching the converter or digital output.\u003c\/p\u003e\n\n\u003ch3\u003eInternal DAC\u003c\/h3\u003e\n\u003cp\u003eA 32-bit\/384 kHz Texas Instruments DAC feeds the analogue outputs and allows the player to be used as a complete source without requiring an external DAC. The converter and output filters are integrated with the power supply and analogue layout.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply and layout\u003c\/h3\u003e\n\u003cp\u003eThe sections dedicated to the motor, servo and audio circuits are managed to reduce mutual interference. Separating these paths limits noise that could reach the DAC and analogue stages and keeps the player focused on accurate reproduction of optical media.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue outputs\u003c\/h3\u003e\n\u003cp\u003eRCA analogue outputs carry the converted signal directly to an integrated amplifier or preamplifier, using the player's DAC and output stages as an active part of the audio chain.\u003c\/p\u003e\n\n\u003ch3\u003eDigital output\u003c\/h3\u003e\n\u003cp\u003eThe coaxial digital output allows CD-14 MKII to operate as a pure CD transport, leaving conversion to an external DAC, digital preamplifier or integrated amplifier equipped with its own converter.\u003c\/p\u003e\n\n\u003ch3\u003eFormats and playback\u003c\/h3\u003e\n\u003cp\u003eCDs and MP3 files on compatible media can be reproduced. Playback functions remain centred on the disc, with track management from the front panel and remote and, where available, display of media information.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and chassis\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is 0.0035% at 1 kHz and signal-to-noise ratio is above 118 dB. The chassis measures 430 x 98 x 314 mm and weighs 6.51 kg, providing a stable base for the mechanism while keeping the power-supply area separated from the analogue stages.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162235506877,"sku":"00205719238","price":599.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162235539645,"sku":"00205719003","price":599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-cd-14-mkii-nero-7jy8m.jpg?v=1789025455"},{"product_id":"amplificatore-integrato-rotel-a12mk2","title":"Rotel A-12 MKII","description":"\u003ch2\u003eIntegrated amplification, loudspeaker control and sources in a single chassis\u003c\/h2\u003e\n\n\u003cp\u003eRotel A-12 MKII is a Class AB integrated amplifier rated at 60 W per channel into 8 ohms and 120 W per channel into 4 ohms, designed to combine preamplification and power amplification in a complete stereo chain.\u003c\/p\u003e\n\n\u003cp\u003eThe output section is powered by an oversized toroidal transformer and operates through a direct analogue signal path. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while four RCA analogue inputs ensure compatibility with traditional components. Tone controls and A\/B loudspeaker outputs keep a conventional stereo system flexible.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 60 W per channel into 8 ohms and 120 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.018%.\u003c\/li\u003e\n  \u003cli\u003eOversized toroidal transformer.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB and four digital inputs.\u003c\/li\u003e\n  \u003cli\u003eFour RCA analogue inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX and Roon Tested certification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and control\u003c\/h3\u003e\n\u003cp\u003eA-12 MKII delivers 60 W per channel into 8 ohms and 120 W per channel into 4 ohms, with declared THD below 0.018%. A damping factor of 220 complements its current capability and helps maintain woofer control, particularly as loudspeaker load varies with frequency.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eAn oversized toroidal transformer powers the amplifier. The transformer and filter capacity support the output section during transients and keep the supply voltage stable, so dynamic performance does not rely solely on the declared nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eConversion and digital inputs\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB and four digital inputs. Digital sources can therefore connect directly to the integrated amplifier and use its internal conversion, reducing the number of separate components in the chain.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eFour RCA analogue inputs are provided. Line-level sources enter the preamplifier without conversion and share the same volume control, allowing a system to be built around players, tuners, external DACs and other analogue components.\u003c\/p\u003e\n\n\u003ch3\u003eVinyl\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage is included. A compatible turntable can therefore be connected directly without adding an external phono preamplifier, keeping vinyl within the same control system.\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and everyday use\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX and Roon Tested certification complement the wired sources. Tone controls and A\/B loudspeaker outputs keep a conventional stereo system flexible, allowing the amplifier to adapt to a modern setup without altering the analogue signal path when these functions are not required.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 430 x 93 x 345 mm and weighs 8.76 kg. Transformer, heatsinks and circuit boards are arranged to keep sensitive sections away from the main sources of noise and heat, providing a stable mechanical base for the power section.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162235703485,"sku":"00205578238","price":819.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162235736253,"sku":"00205578003","price":819.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-a-12-mkii-nero-87hdh.jpg?v=1789026545"},{"product_id":"amplificatore-integrato-rotel-a14-mkii","title":"Rotel A-14 MKII","description":"\u003ch2\u003eIntegrated amplification, loudspeaker control and sources in a single chassis\u003c\/h2\u003e\n\n\u003cp\u003eRotel A-14 MKII is a Class AB integrated amplifier rated at 80 W per channel into 8 ohms and 150 W per channel into 4 ohms, designed to combine preamplification and power amplification in a complete stereo chain.\u003c\/p\u003e\n\n\u003cp\u003eThe output section is powered by an oversized toroidal transformer with four slit-foil capacitors and operates through a direct analogue signal path. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while four RCA analogue inputs ensure compatibility with traditional components. Tone controls provide ±10 dB adjustment and a BYPASS mode; A\/B loudspeaker outputs and a 12 V trigger simplify use in multi-zone systems.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 80 W per channel into 8 ohms and 150 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.018%.\u003c\/li\u003e\n  \u003cli\u003eOversized toroidal transformer with four slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eFour RCA analogue inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX\/AAC, Roon Tested, Ethernet and RS232.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and control\u003c\/h3\u003e\n\u003cp\u003eA-14 MKII delivers 80 W per channel into 8 ohms and 150 W per channel into 4 ohms, with declared THD below 0.018%. A damping factor of 220 complements its current capability and helps maintain woofer control, particularly as loudspeaker load varies with frequency.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eAn oversized toroidal transformer works with four slit-foil capacitors. The transformer and filter capacity support the output section during transients and keep the supply voltage stable, so dynamic performance does not rely solely on the declared nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eConversion and digital inputs\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Digital sources can therefore connect directly to the integrated amplifier and use its internal conversion, reducing the number of separate components in the chain.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eFour RCA analogue inputs are provided. Line-level sources enter the preamplifier without conversion and share the same volume control, allowing a system to be built around players, tuners, external DACs and other analogue components.\u003c\/p\u003e\n\n\u003ch3\u003eVinyl\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage is included. A compatible turntable can therefore be connected directly without adding an external phono preamplifier, keeping vinyl within the same control system.\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and everyday use\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX\/AAC, Roon Tested, Ethernet and RS232 complement the wired sources. Tone controls offer ±10 dB adjustment and a BYPASS mode; A\/B loudspeaker outputs and the 12 V trigger simplify use in multi-zone systems without altering the analogue path when these functions are not required.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 430 x 93 x 345 mm and weighs 8.94 kg. Transformer, heatsinks and circuit boards are arranged to keep sensitive sections away from the main sources of noise and heat, providing a stable mechanical base for the power section.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162235769021,"sku":"00205369001","price":1025.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162235801789,"sku":"00205369003","price":1025.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-a-14-mkii-nero-8lbgk.jpg?v=1789027323"},{"product_id":"amplificatore-integrato-rotel-ra1572-mkii","title":"Rotel RA-1572 MKII","description":"\u003ch2\u003eIntegrated amplification, loudspeaker control and sources in a single chassis\u003c\/h2\u003e\n\n\u003cp\u003eRotel RA-1572 MKII is a Class AB integrated amplifier rated at 120 W per channel into 8 ohms and 200 W per channel into 4 ohms, designed to combine preamplification and power amplification in a complete stereo chain.\u003c\/p\u003e\n\n\u003cp\u003eThe output section is powered by an oversized toroidal transformer with four slit-foil T-Network capacitors and operates through a direct analogue signal path. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while RCA and balanced XLR inputs ensure compatibility with traditional sources. A\/B loudspeaker outputs can also serve a second zone and the front panel includes a 3.5 mm headphone output.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 120 W per channel into 8 ohms and 200 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.018%.\u003c\/li\u003e\n  \u003cli\u003eOversized toroidal transformer with four slit-foil T-Network capacitors.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX and AAC, Roon Tested, Ethernet and RS232.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and control\u003c\/h3\u003e\n\u003cp\u003eRA-1572 MKII delivers 120 W per channel into 8 ohms and 200 W per channel into 4 ohms, with declared THD below 0.018%. A damping factor of 300 complements current capability and helps maintain woofer control, particularly as loudspeaker load varies with frequency.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eAn oversized toroidal transformer works with four slit-foil T-Network capacitors. The transformer and filter capacity support the output stage during transients and keep supply voltage stable, so dynamic performance does not rely solely on nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eConversion and digital inputs\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Digital sources can therefore connect directly to the integrated amplifier and use its internal conversion, reducing the number of separate components in the chain.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs are provided. Line-level sources enter the preamplifier without conversion and share the same volume control, allowing a system to include players, tuners, external DACs and other analogue components.\u003c\/p\u003e\n\n\u003ch3\u003eVinyl\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage is included. A compatible turntable can therefore be connected directly without an external phono preamplifier, keeping vinyl within the same control system.\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and everyday use\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX and AAC, Roon Tested, Ethernet and RS232 complement the wired sources. A\/B loudspeaker outputs can also serve a second zone and the front panel includes a 3.5 mm headphone output, adapting the amplifier to a modern system without altering the analogue path when these functions are not required.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 358 mm and weighs 13.63 kg. Transformer, heatsinks and circuit boards are arranged to keep sensitive sections away from the main sources of noise and heat, providing a stable mechanical base for the power section.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162235998397,"sku":"00205367001","price":1535.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236031165,"sku":"00205367003","price":1535.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-ra-1572-mkii-nero-u7uqo.jpg?v=1789124026"},{"product_id":"amplificatore-integrato-rotel-ra1592-mk-ii","title":"Rotel RA-1592 MKII","description":"\u003ch2\u003eIntegrated amplification, loudspeaker control and sources in a single chassis\u003c\/h2\u003e\n\n\u003cp\u003eRotel RA-1592 MKII is a Class AB integrated amplifier rated at 200 W per channel into 8 ohms and 350 W per channel into 4 ohms, designed to combine preamplification and power amplification in a complete stereo chain.\u003c\/p\u003e\n\n\u003cp\u003eThe output section is powered by an oversized toroidal transformer with low-ESR slit-foil capacitors and operates through a direct analogue signal path. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while RCA and balanced XLR inputs ensure compatibility with traditional sources. A\/B loudspeaker outputs, a 12 V trigger and the front display simplify integration into complex systems.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 200 W per channel into 8 ohms and 350 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.008%.\u003c\/li\u003e\n  \u003cli\u003eOversized toroidal transformer with low-ESR slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX and AAC, Roon Tested, Ethernet and RS232.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and control\u003c\/h3\u003e\n\u003cp\u003eRA-1592 MKII delivers 200 W per channel into 8 ohms and 350 W per channel into 4 ohms, with declared THD below 0.008%. A damping factor of 600 complements current capability and helps maintain woofer control, particularly as loudspeaker load varies with frequency.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eAn oversized toroidal transformer works with low-ESR slit-foil capacitors. The transformer and filter capacity support the output stage during transients and keep supply voltage stable, so dynamic performance does not rely solely on nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eConversion and digital inputs\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Digital sources can therefore connect directly to the integrated amplifier and use its internal conversion, reducing the number of separate components in the chain.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs are provided. Line-level sources enter the preamplifier without conversion and share the same volume control, allowing a system to include players, tuners, external DACs and other analogue components.\u003c\/p\u003e\n\n\u003ch3\u003eVinyl\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage is included. A compatible turntable can therefore be connected directly without an external phono preamplifier, keeping vinyl within the same control system.\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and everyday use\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX and AAC, Roon Tested, Ethernet and RS232 complement the wired sources. A\/B loudspeaker outputs, the 12 V trigger and front display simplify integration into complex systems, adapting the amplifier without altering the analogue path when these functions are not required.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 425 mm and weighs 17.63 kg. Transformer, heatsinks and circuit boards are arranged to keep sensitive sections away from the main sources of noise and heat, providing a stable mechanical base for the power section.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236063933,"sku":"00205368001","price":2130.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236096701,"sku":"00205368003","price":2130.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-ra-1592-mkii-nero-u9zbl.jpg?v=1789124080"},{"product_id":"preamplificatore-rotel-rc1572-mkii","title":"Rotel RC-1572 MKII","description":"\u003ch2\u003eAnalogue and digital control for a separate stereo chain\u003c\/h2\u003e\n\n\u003cp\u003eRotel RC-1572 MKII is a stereo preamplifier with RCA and balanced XLR inputs, PC-USB, coaxial and optical inputs with MQA, and RCA and balanced XLR outputs plus a subwoofer output, designed to drive external power amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eA large toroidal transformer with low-ESR slit-foil capacitors powers the analogue and digital sections with particular attention to noise. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while the MM phono stage and line connections retain support for analogue sources. Output management enables a separate chain that is more flexible than an integrated amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge toroidal transformer with low-ESR slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX\/AAC and Roon Tested certification.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR outputs plus subwoofer output.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.004%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eA large toroidal transformer with low-ESR slit-foil capacitors powers the preamplifier. Supply separation limits noise transfer between digital and analogue sections and provides a stable reference for the line stages, particularly important because a preamplifier works with signals far lower in level than a power amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eDAC and digital sources\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Players, computers and streamers can use internal conversion and reach the analogue outputs without an external DAC, keeping source selection and volume control concentrated in the preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs allow an entirely analogue path for sources that have already been converted, while balanced inputs reduce sensitivity to noise over longer cable runs where available.\u003c\/p\u003e\n\n\u003ch3\u003ePhono stage\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage allows a compatible turntable to enter the system directly without an external phono preamplifier, sharing volume control and the same outputs used by line and digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eWireless and integration\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX\/AAC and Roon Tested certification complement the wired connections, providing a more immediate route for smartphones and digital libraries without changing the main architecture of the chain.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs to power amplifiers\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR outputs are joined by a subwoofer output. The preamplifier can therefore drive stereo or monoblock power amplifiers and active subwoofers according to the system, keeping source selection separate from power amplification and simplifying future upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and performance\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.004%. The chassis measures 431 x 99 x 338 mm and weighs 8.36 kg, with an internal layout focused on separating the power supply, digital section and analogue path to keep noise low before power amplification.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236129469,"sku":"00205372001","price":1095.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236162237,"sku":"00205372003","price":1095.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rc-1572-mkii-nero-8bmfu.jpg?v=1789026738"},{"product_id":"preamplificatore-rotel-rc1590-mkii","title":"Rotel RC-1590 MKII","description":"\u003ch2\u003eAnalogue and digital control for a separate stereo chain\u003c\/h2\u003e\n\n\u003cp\u003eRotel RC-1590 MKII is a stereo preamplifier with RCA and balanced XLR inputs with DIRECT-PATH mode, PC-USB, coaxial and optical inputs with MQA, dual RCA outputs, balanced XLR outputs and a subwoofer output, designed to drive external power amplifiers.\u003c\/p\u003e\n\n\u003cp\u003eTwo isolated toroidal transformers with separate analogue and digital supplies power the different sections with particular attention to noise. A premium 32-bit\/384 kHz Texas Instruments DAC handles digital sources, while the MM phono stage and line connections retain support for analogue sources. Output management enables a separate chain that is more flexible than an integrated amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo isolated toroidal transformers with separate analogue and digital power supplies.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB, coaxial and optical inputs with MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs with DIRECT-PATH mode.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX\/AAC and Roon Tested certification.\u003c\/li\u003e\n  \u003cli\u003eDual RCA outputs, balanced XLR outputs and subwoofer output.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.002%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eTwo isolated toroidal transformers provide separate analogue and digital supplies. This separation limits noise transfer between the two sections and provides a stable reference for the line stages, particularly important because a preamplifier works with signals far lower in level than a power amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eDAC and digital sources\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC works with PC-USB, coaxial and optical inputs with MQA. Players, computers and streamers can use internal conversion and reach the analogue outputs without an external DAC, keeping source selection and volume control concentrated in the preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs with DIRECT-PATH mode allow an entirely analogue path for sources that have already been converted, while balanced inputs reduce sensitivity to noise over longer cable runs where available.\u003c\/p\u003e\n\n\u003ch3\u003ePhono stage\u003c\/h3\u003e\n\u003cp\u003eAn MM phono stage allows a compatible turntable to enter the system directly without an external phono preamplifier, sharing volume control and the same outputs used by line and digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eWireless and integration\u003c\/h3\u003e\n\u003cp\u003eBluetooth aptX\/AAC and Roon Tested certification complement the wired connections, providing a more immediate route for smartphones and digital libraries without changing the main architecture of the chain.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs to power amplifiers\u003c\/h3\u003e\n\u003cp\u003eDual RCA outputs, balanced XLR outputs and a subwoofer output allow the preamplifier to drive stereo or monoblock power amplifiers and active subwoofers according to the system, keeping source selection separate from power amplification and simplifying future upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and performance\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.002%. The chassis measures 431 x 144 x 348 mm and weighs 10.1 kg, with an internal layout focused on separating the power supply, digital section and analogue path to keep noise low before power amplification.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236195005,"sku":"00205373001","price":1500.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236227773,"sku":"00205373003","price":1500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rc-1590-mkii-nero-7znk6.jpg?v=1789026180"},{"product_id":"amplificatore-finale-rotel-rb1590","title":"Rotel RB-1590","description":"\u003ch2\u003eStereo Class AB power and a high-current power supply\u003c\/h2\u003e\n\n\u003cp\u003eRotel RB-1590 is a Class AB stereo power amplifier rated at 350 W per channel into 8 ohms and 648 W per channel into 4 ohms, with dual high-current toroidal transformers and RCA and balanced XLR connections.\u003c\/p\u003e\n\n\u003cp\u003eThe design is built around an oversized power supply and discrete output stages intended to drive demanding loudspeakers. Eight British-made BHC slit-foil capacitors provide the energy reserve. The internal layout limits interference between the channels and keeps current paths short, while the available inputs allow use in traditional or balanced stereo chains.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 350 W per channel into 8 ohms.\u003c\/li\u003e\n  \u003cli\u003eContinuous power of 648 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with THD below 0.03%.\u003c\/li\u003e\n  \u003cli\u003eDual high-current toroidal transformers.\u003c\/li\u003e\n  \u003cli\u003eEight British-made BHC slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eDamping factor of 300.\u003c\/li\u003e\n  \u003cli\u003eFrequency response from 10 Hz to 100 kHz within ±0.5 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and drive capability\u003c\/h3\u003e\n\u003cp\u003eRB-1590 delivers 350 W per channel into 8 ohms and 648 W per channel into 4 ohms, retaining substantial reserve as loudspeaker impedance falls. Declared total harmonic distortion remains below 0.03%, accompanying an output section designed to combine current, control and linearity.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply\u003c\/h3\u003e\n\u003cp\u003eDual high-current toroidal transformers form the core of the supply. The power section is sized to sustain transients without compressing dynamics, because the ability to drive a loudspeaker depends on available current as much as on nominal power.\u003c\/p\u003e\n\n\u003ch3\u003eEnergy reserve\u003c\/h3\u003e\n\u003cp\u003eEight British-made BHC slit-foil capacitors are selected to release stored energy quickly and support bass during more demanding passages, while limiting internal losses and supply-voltage variation under load.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe output stage operates in Class AB and declares a frequency response from 10 Hz to 100 kHz within ±0.5 dB. A damping factor of 300 contributes to woofer control and transient precision, while the topology maintains bandwidth wide enough not to constrain the audio signal.\u003c\/p\u003e\n\n\u003ch3\u003eInputs and preamplifier\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs allow connection to preamplifiers with different topologies and output levels. Balanced connections are particularly useful with long cable runs or systems where reducing sensitivity to picked-up noise is important.\u003c\/p\u003e\n\n\u003ch3\u003eLoudspeakers and system control\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker terminals accommodate substantial cable sizes and a 12 V trigger synchronises power with a compatible preamplifier. The channel topology is essentially monoblock after the power-supply section and includes thermal, over-current and over-voltage protection. The amplifier can therefore work in a traditional chain or a centrally controlled system.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and cooling\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 237 x 456 mm and weighs 38.1 kg. Much of the mass comes from the transformers, heatsinks and output stages, while the mechanical layout keeps heat-generating components away from the more sensitive input sections.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236260541,"sku":"00203623001","price":2665.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236293309,"sku":"00203623003","price":2665.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rb-1590-nero-8jfdg.jpg?v=1789027104"},{"product_id":"lettore-cd-rotel-rcd1572-mkii","title":"Rotel RCD-1572 MKII","description":"\u003ch2\u003ePrecise CD playback, dedicated conversion and a low-noise audio path\u003c\/h2\u003e\n\n\u003cp\u003eRotel RCD-1572 MKII is a CD player with a smooth and quiet tray mechanism, premium 32-bit\/384 kHz Texas Instruments DAC and RCA and balanced XLR outputs, designed to reproduce optical media through a dedicated chain.\u003c\/p\u003e\n\n\u003cp\u003eThe design separates the mechanism, servo and power supply from the sensitive audio sections. A premium 32-bit\/384 kHz Texas Instruments DAC converts the signal for the analogue outputs, while a coaxial digital output also allows the player to be used as a transport into an external DAC. The analogue circuitry is fully balanced towards the XLR outputs and a 12 V trigger allows coordinated power with other Rotel components.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSmooth and quiet tray-loading CD mechanism.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz Texas Instruments DAC.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR outputs.\u003c\/li\u003e\n  \u003cli\u003eCoaxial digital output.\u003c\/li\u003e\n  \u003cli\u003eAudio CD playback with full track control.\u003c\/li\u003e\n  \u003cli\u003eDeclared THD below 0.0045%.\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio above 118 dB.\u003c\/li\u003e\n  \u003cli\u003e431 x 104 x 320 mm chassis weighing 7.34 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDisc mechanism\u003c\/h3\u003e\n\u003cp\u003eThe CD mechanism uses a smooth and quiet tray. The optical assembly and motor are designed to track the disc precisely while limiting vibration and mechanical noise, so the digital signal is extracted under stable conditions before reaching the converter or digital output.\u003c\/p\u003e\n\n\u003ch3\u003eInternal DAC\u003c\/h3\u003e\n\u003cp\u003eA premium 32-bit\/384 kHz Texas Instruments DAC feeds the analogue outputs and allows the player to be used as a complete source without requiring an external DAC. The converter and output filters are integrated with the power supply and analogue layout.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply and layout\u003c\/h3\u003e\n\u003cp\u003eThe sections dedicated to the motor, servo and audio circuits are managed to reduce mutual interference. Separating these paths limits noise that could reach the DAC and analogue stages and keeps the player focused on accurate reproduction of optical media.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue outputs\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR outputs carry the converted signal directly to an integrated amplifier or preamplifier, using the player's DAC and output stages as an active part of the audio chain.\u003c\/p\u003e\n\n\u003ch3\u003eDigital output\u003c\/h3\u003e\n\u003cp\u003eThe coaxial digital output allows RCD-1572 MKII to operate as a pure CD transport, leaving conversion to an external DAC, digital preamplifier or integrated amplifier equipped with its own converter.\u003c\/p\u003e\n\n\u003ch3\u003eFormats and playback\u003c\/h3\u003e\n\u003cp\u003eAudio CD playback includes full track control. Functions remain centred on the disc, with track management from the front panel and remote and, where available, display of media information.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and chassis\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.0045% and signal-to-noise ratio is above 118 dB. The chassis measures 431 x 104 x 320 mm and weighs 7.34 kg, providing a stable base for the mechanism while keeping the power-supply area separated from the analogue stages.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":42162236326077,"sku":"00205601238","price":869.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42162236358845,"sku":"00205601003","price":869.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rcd-1572-mkii-nero-7qlkc.png?v=1789025764"},{"product_id":"amplificatore-finale-rotel-michi-s5","title":"Rotel Michi S5","description":"\u003ch2\u003eDual mono Class AB for absolute loudspeaker control\u003c\/h2\u003e\n\n\u003cp\u003eMichi S5 is a dual mono stereo power amplifier rated at 500 W per channel into 8 ohms and 800 W into 4 ohms, with two 2,200 VA toroidal transformers and 32 output devices.\u003c\/p\u003e\n\n\u003cp\u003eThe two channels have independent power supplies and a total capacitor reserve of 188,000 µF. The Class AB output stage is designed to maintain current and control even with difficult loads, while XLR, RCA, rhodium-plated terminals and automation interfaces simplify integration into reference systems.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 500 W per channel into 8 ohms and 800 W into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eDual mono architecture with independent power supplies.\u003c\/li\u003e\n  \u003cli\u003eTwo 2,200 VA toroidal transformers manufactured by Rotel.\u003c\/li\u003e\n  \u003cli\u003eFour filter capacitors providing a total of 188,000 µF.\u003c\/li\u003e\n  \u003cli\u003eOutput stage with 32 high-current devices.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eDamping factor of 350 and signal-to-noise ratio of 120 dB.\u003c\/li\u003e\n  \u003cli\u003eRhodium-plated terminals, RS232 and Ethernet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower into 8 and 4 ohms\u003c\/h3\u003e\n\u003cp\u003eS5 delivers 500 W per channel into 8 ohms and more than 800 W into 4 ohms, with declared THD below 0.008%. The available reserve is designed to keep drive stable when loudspeaker impedance and phase become more demanding.\u003c\/p\u003e\n\n\u003ch3\u003eDual mono architecture\u003c\/h3\u003e\n\u003cp\u003eThe left and right channels are organised with independent power supplies and separate signal paths. The dual mono structure reduces interaction between channels and allows each power section to draw from its own energy reserve.\u003c\/p\u003e\n\n\u003ch3\u003e2,200 VA transformers\u003c\/h3\u003e\n\u003cp\u003eEach channel has a 2,200 VA toroidal transformer, designed and manufactured in-house. Epoxy-filled enclosures help contain vibration and mechanical noise during operation.\u003c\/p\u003e\n\n\u003ch3\u003eCapacitor reserve\u003c\/h3\u003e\n\u003cp\u003eFour British-made filter capacitors provide a combined 188,000 µF. The substantial capacity supports dynamic peaks and contributes to bass control when the load demands immediate current.\u003c\/p\u003e\n\n\u003ch3\u003eOutput stage\u003c\/h3\u003e\n\u003cp\u003eThirty-two high-current devices share the work of the output stage and provide headroom with more severe loads. The aim is to maintain smooth delivery rather than simply achieve a high power figure.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe declared response runs from 20 Hz to 20 kHz within +0\/-0.15 dB and extends to 100 kHz. The damping factor of 350 complements a Class AB section focused on loudspeaker control.\u003c\/p\u003e\n\n\u003ch3\u003eRCA and XLR inputs\u003c\/h3\u003e\n\u003cp\u003eS5 accepts unbalanced RCA and balanced XLR inputs, with gains of 28 dB and 24 dB respectively. Having both allows pairing with different preamplifiers and with fully balanced systems.\u003c\/p\u003e\n\n\u003ch3\u003eTerminals and automation\u003c\/h3\u003e\n\u003cp\u003eThe dual high-current loudspeaker terminals are rhodium-plated. RS232 and Ethernet allow integration with automation systems, while the remote control manages the main operating and configuration functions.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and display\u003c\/h3\u003e\n\u003cp\u003eThe power amplifier measures 485 x 238 x 465 mm and weighs 59.9 kg, much of that mass resulting from the dual mono construction. The colour front display keeps operating status clearly visible without altering the amplifier's restrained design.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":42162242388157,"sku":"00205053001","price":5850.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-s5-7z4ak.jpg?v=1789026154"},{"product_id":"amplificatore-finale-rotel-michi-m8","title":"Rotel Michi M8","description":"\u003ch2\u003eA 1,800-watt monoblock for the most demanding loads\u003c\/h2\u003e\n\n\u003cp\u003eMichi M8 is a Class AB monoblock power amplifier rated at 1,080 W into 8 ohms and 1,800 W into 4 ohms, with dual toroidal transformers, slit-foil capacitors and 32 output devices.\u003c\/p\u003e\n\n\u003cp\u003eEach M8 concentrates its entire power supply on a single loudspeaker, eliminating shared resources between channels. The pair of toroidal transformers and high-current output stage sustain exceptional power, while XLR, RCA, dual rhodium-plated terminals and network control simplify use in large-scale stereo systems.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 1,080 W into 8 ohms and 1,800 W into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB monoblock amplification.\u003c\/li\u003e\n  \u003cli\u003ePair of custom-designed toroidal transformers.\u003c\/li\u003e\n  \u003cli\u003eFour low-ESR slit-foil capacitors.\u003c\/li\u003e\n  \u003cli\u003eOutput stage with 32 high-current devices.\u003c\/li\u003e\n  \u003cli\u003eRCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio of 120 dB and damping factor of 200.\u003c\/li\u003e\n  \u003cli\u003eDual rhodium-plated terminals, RS232 and Ethernet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e1,080 watts into 8 ohms\u003c\/h3\u003e\n\u003cp\u003eM8 delivers a continuous 1,080 W into 8 ohms and 1,800 W into 4 ohms, concentrating the full capacity of its power supply on one loudspeaker. Declared THD remains below 0.018% even with power reserve on this scale.\u003c\/p\u003e\n\n\u003ch3\u003eMonoblock architecture\u003c\/h3\u003e\n\u003cp\u003eOne M8 drives a single channel, so a stereo system uses one power amplifier per side. Each loudspeaker therefore has dedicated transformers, output stage and power supply, with no current shared with the opposite channel.\u003c\/p\u003e\n\n\u003ch3\u003eDual toroidal transformers\u003c\/h3\u003e\n\u003cp\u003eThe power supply uses two custom-designed toroidal transformers manufactured in-house. This arrangement increases reserve and reduces stress on each unit when the amplifier operates close to its maximum ratings into 4 ohms.\u003c\/p\u003e\n\n\u003ch3\u003eSlit-foil capacitors\u003c\/h3\u003e\n\u003cp\u003eFour British-made capacitors use slit-foil technology and low ESR. Their energy reserve feeds the output stage rapidly during transients and limits internal losses during high-current peaks.\u003c\/p\u003e\n\n\u003ch3\u003eThirty-two devices\u003c\/h3\u003e\n\u003cp\u003eThe output stage uses 32 high-current devices to distribute the load and maintain operating headroom. This generous provision contributes to stability when the loudspeaker presents particularly demanding impedance and phase conditions.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and bandwidth\u003c\/h3\u003e\n\u003cp\u003eThe declared response runs from 20 Hz to 20 kHz within +0\/-0.15 dB and reaches 100 kHz. A signal-to-noise ratio of 120 dB and damping factor of 200 complete the profile of the Class AB section.\u003c\/p\u003e\n\n\u003ch3\u003eRCA and XLR inputs\u003c\/h3\u003e\n\u003cp\u003eBalanced XLR and RCA inputs are available, with sensitivities of 3 V and 1.85 V respectively. The power amplifier can therefore work with different preamplifiers while maintaining, where available, a fully balanced chain.\u003c\/p\u003e\n\n\u003ch3\u003eTerminals and automation\u003c\/h3\u003e\n\u003cp\u003eThe dual loudspeaker terminals are rhodium-plated and sized for high currents. RS232 and Ethernet connections simplify integration with automation systems and installations where the power amplifier is not easily accessible.\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and construction\u003c\/h3\u003e\n\u003cp\u003eThe high-resolution display can show peak power or operate as a spectrum analyser. M8 measures 485 x 238 x 465 mm and weighs 59.1 kg, figures consistent with the scale of its internal power supply.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":42162242453693,"sku":"00205054001","price":5890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-m8-7y0ue.jpg?v=1789026104"},{"product_id":"accessorio-per-giradischi-vinyl-nrs-box-s3","title":"Pro-Ject Vinyl NRS Box S3","description":"\u003cp\u003e\u003cstrong\u003eA digital processor for vinyl, the Vinyl NRS Box S3 goes between phono stage and amplifier: it tames the crackle and clicks of worn records and lowers background noise, working at 24-bit \/ 96 kHz.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eVinyl NRS Box S3: how it processes\u003c\/h2\u003e\n\u003cp\u003eIt is aimed at old, time-worn records, perhaps impossible to buy new or missing from streaming services, that noise has made tiring to listen to. It operates at line level: it connects to the phono stage output and, downstream, to the preamplifier or integrated amplifier. The signal is digitised at 24-bit \/ 96 kHz; should it be too hot, an LED flags the overload and a switch cuts it by 6 dB.\u003c\/p\u003e\n\u003cp\u003eThe De-Crackling function identifies the high-frequency peaks typical of crackle and attenuates them. Sensitivity is set with the front knob, while an LED shows when the filter is at work; turning the knob fully anticlockwise takes the function out of circuit. There are two algorithms: the basic one, which is lighter, cuts clicks by 8 dB between 3 and 20 kHz, and the intensive one, called up with the Intensity button, reaches 12 dB between 2 and 20 kHz. It is best to begin with the first.\u003c\/p\u003e\n\u003cp\u003eThe VNRS button, by contrast, engages noise reduction: the signal is split into two frequency bands and passed to two expanders, which improve the signal-to-noise ratio by as much as 8 dB with no audible noise modulation; noise coming from the turntable drive is lowered as well. This function has a single preset. When switched off the unit is in galvanic bypass, with inputs wired straight to outputs. The case is aluminium, in the S3 range format.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eType: line-level noise reduction processor for vinyl\u003c\/li\u003e\u003cli\u003eInternal sampling: 24-bit \/ 96 kHz\u003c\/li\u003e\u003cli\u003eInternal processing: double-precision, 56-bit accumulator\u003c\/li\u003e\u003cli\u003eResponse 20 Hz - 20 kHz: -0.6 \/ +0.1 dB\u003c\/li\u003e\u003cli\u003eResponse 30 Hz - 20 kHz: -0.2 \/ +0.1 dB\u003c\/li\u003e\u003cli\u003eOverload indicator: 0.6 dB short of actual clipping\u003c\/li\u003e\u003cli\u003eInput attenuation: -6 dB, switchable\u003c\/li\u003e\u003cli\u003eBypass: galvanic when off, link resistance under 0.3 ohm\u003c\/li\u003e\u003cli\u003eHarmonic distortion: under 0.009% with a 500 mVrms input\u003c\/li\u003e\u003cli\u003eVNRS noise reduction: as much as 8 dB (20 Hz - 20 kHz)\u003c\/li\u003e\u003cli\u003eBasic De-Crackling: 8 dB (3 - 20 kHz)\u003c\/li\u003e\u003cli\u003eIntensive De-Crackling: 12 dB (2 - 20 kHz)\u003c\/li\u003e\u003cli\u003ePower: external adaptor, 18 V \/ 500 mA DC\u003c\/li\u003e\u003cli\u003eConsumption: 2.2 W when on, 0 W when off\u003c\/li\u003e\u003cli\u003eSize (width x height x depth): 103 x 37 x 104 mm, 119 mm including sockets\u003c\/li\u003e\u003cli\u003eWeight: 340 g, adaptor excluded\u003c\/li\u003e\u003cli\u003eFinishes: black, silver\u003c\/li\u003e\u003c\/ul\u003e","brand":"Pro-Ject","offers":[{"title":"Black","offer_id":42415255191741,"sku":"01006003238","price":279.2,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":42415255224509,"sku":"01006003003","price":279.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/pro-ject-vinyl-nrs-box-s3-nero-yt260.jpg?v=1792396862"},{"product_id":"amplificatore-finale-multicanale-rmb-1504","title":"Rotel RMB-1504","description":"\u003ch2\u003eFour Class AB channels for home cinema and multi-zone installations\u003c\/h2\u003e\n\n\u003cp\u003eRotel RMB-1504 is a Class AB multichannel power amplifier rated at 70 W per channel into 8 ohms and 115 W per channel into 4 ohms with all channels driven, designed for home cinema systems and distributed audio.\u003c\/p\u003e\n\n\u003cp\u003eThe power supply is sized to support several loudspeakers at the same time, a more demanding condition than testing one channel alone. A large in-house toroidal transformer, high-efficiency capacitors and high-current output transistors provide the required reserve, while discrete circuits and trigger functions simplify installation in racks and dedicated cinema rooms.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour channels of Class AB amplification.\u003c\/li\u003e\n  \u003cli\u003e70 W per channel into 8 ohms with all channels driven.\u003c\/li\u003e\n  \u003cli\u003e115 W per channel into 4 ohms with all channels driven.\u003c\/li\u003e\n  \u003cli\u003eTHD below 0.03%.\u003c\/li\u003e\n  \u003cli\u003eLarge in-house toroidal transformer.\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency capacitors and high-current output transistors.\u003c\/li\u003e\n  \u003cli\u003eRCA inputs with link outputs.\u003c\/li\u003e\n  \u003cli\u003eDamping factor above 200.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower with all channels driven\u003c\/h3\u003e\n\u003cp\u003eRMB-1504 delivers 70 W per channel into 8 ohms and 115 W per channel into 4 ohms with all four channels active. The all-channels-driven figure is important in a multichannel system because it describes supply capability when several loudspeakers demand current simultaneously during a dynamic soundtrack.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-current power supply\u003c\/h3\u003e\n\u003cp\u003eA large in-house toroidal transformer supports the power section. Its reserve is sized for simultaneous channel use and reduces the risk that peaks on one loudspeaker take energy from the others, maintaining more stable behaviour across the system.\u003c\/p\u003e\n\n\u003ch3\u003eCapacitors and transients\u003c\/h3\u003e\n\u003cp\u003eHigh-efficiency capacitors and high-current output transistors support transients and bass when effects involve several channels. Low internal resistance helps transfer energy rapidly to the output stages without introducing a slow response under load.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB and response\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is below 0.03% and frequency response runs from 10 Hz to 100 kHz within ±1 dB. A damping factor above 200 contributes to woofer control, particularly useful when several large loudspeakers are driven in the same room.\u003c\/p\u003e\n\n\u003ch3\u003eInputs and AV processor\u003c\/h3\u003e\n\u003cp\u003eRCA inputs with link outputs connect surround processors and preamplifiers with different outputs. Front attenuation controls, automatic signal sensing and 12 V triggers are designed for distributed installations; the model is offered in a single finish. The power amplifier remains independent of decoding and can be retained when the upstream processor changes.\u003c\/p\u003e\n\n\u003ch3\u003eTrigger and installation\u003c\/h3\u003e\n\u003cp\u003eThe 12 V trigger allows the power amplifier to switch on with the processor or a control system. Installation functions reduce the need for manual intervention when the unit is placed in a technical rack or dedicated cinema room.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and thermal management\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 443 mm and weighs 14.9 kg. Heatsinks, power supply and amplification modules occupy most of the structure and are distributed to encourage cooling while keeping input sections away from the main sources of heat and magnetic field.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":42721787805885,"sku":"00205138238","price":1039.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rmb-1504-87z4v.jpg?v=1789026569"},{"product_id":"amplificatore-integrato-stereo-s14","title":"Rotel S-14","description":"\u003ch2\u003eIntegrated streaming and 150 watts into 4 ohms for a connected stereo system\u003c\/h2\u003e\n\n\u003cp\u003eRotel S14 is an integrated streaming amplifier rated at 80 W per channel into 8 ohms and 150 W into 4 ohms, with 32-bit ESS DAC, Roon Ready and Wi-Fi\/Ethernet connectivity.\u003c\/p\u003e\n\n\u003cp\u003eThe component combines amplification, conversion and network services in a compact chassis. Spotify Connect, TIDAL, Qobuz, AirPlay 2, Google Cast and internet radio are handled directly, while analogue, coaxial, optical, PC-USB and Bluetooth inputs keep external sources connected as well.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e80 W per channel into 8 ohms and 150 W per channel into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification.\u003c\/li\u003e\n  \u003cli\u003e32-bit ESS DAC.\u003c\/li\u003e\n  \u003cli\u003eSpotify Connect, TIDAL, Qobuz, AirPlay 2 and Google Cast.\u003c\/li\u003e\n  \u003cli\u003eRoon Ready certification.\u003c\/li\u003e\n  \u003cli\u003ePC-USB up to 24-bit\/384 kHz.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX™ HD and AAC.\u003c\/li\u003e\n  \u003cli\u003eEthernet, dual-band Wi-Fi and control app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eClass AB power\u003c\/h3\u003e\n\u003cp\u003eS14 delivers 80 W per channel into 8 ohms and 150 W into 4 ohms. A damping factor of 400 accompanies the output stage and declared THD remains below 0.04%, providing a power base suited to bookshelf and floorstanding loudspeakers of normal sensitivity.\u003c\/p\u003e\n\n\u003ch3\u003eStreaming and services\u003c\/h3\u003e\n\u003cp\u003eThe platform integrates Spotify Connect, TIDAL, Qobuz, AirPlay 2, Google Cast, internet radio and podcasts. Music can therefore arrive directly from the network without a separate streamer, while the app recalls sources and content from a phone or tablet.\u003c\/p\u003e\n\n\u003ch3\u003eRoon Ready\u003c\/h3\u003e\n\u003cp\u003eRoon Ready certification allows S14 to operate as a native network endpoint. The stream reaches the internal DAC directly over Ethernet or Wi-Fi, avoiding external adaptors and keeping library and metadata control within the Roon ecosystem.\u003c\/p\u003e\n\n\u003ch3\u003eESS DAC and PC-USB\u003c\/h3\u003e\n\u003cp\u003eThe 32-bit ESS DAC handles network and digital inputs. PC-USB supports signals up to 24-bit\/384 kHz, while coaxial and optical inputs connect players and other digital sources using the S14's internal conversion.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and USB memory\u003c\/h3\u003e\n\u003cp\u003eBluetooth supports aptX™ HD and AAC for compatible sources. The front USB port plays MP3, WMA and AAC files from storage devices, providing local access to digital content even when the home network is not in use.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs\u003c\/h3\u003e\n\u003cp\u003eRCA inputs allow traditional analogue sources such as players, tuners or external DACs to be connected. The line signal enters the preamplifier directly and shares volume control with digital and network sources.\u003c\/p\u003e\n\n\u003ch3\u003eNetwork and control\u003c\/h3\u003e\n\u003cp\u003eEthernet and dual-band Wi-Fi provide connection to the home network, while the Rotel app manages configuration and playback. Front controls and the remote remain available for the main functions, avoiding total dependence on a smartphone.\u003c\/p\u003e\n\n\u003ch3\u003eCompact chassis\u003c\/h3\u003e\n\u003cp\u003eS14 measures 430 x 93 x 345 mm and weighs 9.15 kg. Despite its low height, the rigid chassis contains transformer, heatsinks, network module and DAC, while keeping the main power-supply and signal areas separated.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":46521024905560,"sku":"00206156238","price":1599.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":46521024938328,"sku":"00206156003","price":1599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-s-14-nero-8gkyp.jpg?v=1789026972"},{"product_id":"preamplificatore-rsp-1576-mk-ii","title":"Rotel RSP-1576 MKII","description":"\u003ch2\u003e7.1.4 processing, Dirac Live and 4K HDMI for the heart of a home cinema system\u003c\/h2\u003e\n\n\u003cp\u003eRotel RSP-1576 MKII is a 7.1.4 A\/V processor with Dolby Atmos®, DTS:X®, Dirac Live Full, seven HDMI inputs and conversion handled by six 24-bit\/192 kHz Wolfson DACs.\u003c\/p\u003e\n\n\u003cp\u003eThe processor separates processing from amplification, leaving external power amplifiers to drive the loudspeakers. A quad-core Texas Instruments DSP handles decoding and bass management, Dirac Live Full corrects in-room response and the HDMI 2.0b section supports 4K\/HDR signals, while analogue inputs, MM phono and Bluetooth complete source management.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProcessing for up to 7.1.4 channels.\u003c\/li\u003e\n  \u003cli\u003eDolby Atmos®, DTS:X® and decoding of the main lossless formats.\u003c\/li\u003e\n  \u003cli\u003eDirac Live Full for room acoustic correction.\u003c\/li\u003e\n  \u003cli\u003eSeven HDMI inputs and two HDMI 2.0b outputs with HDCP 2.2.\u003c\/li\u003e\n  \u003cli\u003e4K\/60 Hz video and HDR10 support.\u003c\/li\u003e\n  \u003cli\u003eQuad-core Texas Instruments DSP and six 24-bit\/192 kHz Wolfson DACs.\u003c\/li\u003e\n  \u003cli\u003eBluetooth aptX and MM phono stage.\u003c\/li\u003e\n  \u003cli\u003eRS232, Ethernet and triggers for integration and automation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e7.1.4 and immersive formats\u003c\/h3\u003e\n\u003cp\u003eRSP-1576 MKII handles configurations up to 7.1.4 channels and decodes Dolby Atmos® and DTS:X®, as well as Dolby TrueHD and DTS-HD Master Audio lossless formats. Preamplifier outputs leave the choice of external power amplifiers completely open.\u003c\/p\u003e\n\n\u003ch3\u003eDirac Live Full\u003c\/h3\u003e\n\u003cp\u003eDirac Live Full measures the system response in the room and calculates wide-band correction filters. The processor acts on levels, distances, frequency response and the room's time-domain behaviour.\u003c\/p\u003e\n\n\u003ch3\u003e4K HDMI and HDR\u003c\/h3\u003e\n\u003cp\u003eSeven inputs and two HDMI outputs use HDMI 2.0b with HDCP 2.2 and support 4K\/60 Hz video and HDR10. ARC returns audio from the television, while the HDMI matrix centralises consoles, players and video sources without separating the audio path from the picture.\u003c\/p\u003e\n\n\u003ch3\u003eDSP and Wolfson DACs\u003c\/h3\u003e\n\u003cp\u003eProcessing is handled by a quad-core Texas Instruments DSP, while six 24-bit\/192 kHz Wolfson DACs convert the analogue channels. Separating digital processing and conversion allows bass management, immersive formats and room correction to run simultaneously while retaining dedicated analogue outputs for the power amplifiers.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs and phono\u003c\/h3\u003e\n\u003cp\u003eAlongside HDMI sources there are analogue inputs, optical and coaxial digital inputs and an MM phono stage. A turntable can therefore enter the processor directly and share the same zone and volume management without requiring a separate stereo preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and digital sources\u003c\/h3\u003e\n\u003cp\u003eBluetooth with aptX allows wireless playback from compatible devices, while traditional digital inputs handle non-HDMI audio sources. The processor can therefore remain the centre of a music system as well as a multichannel cinema system.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs and integration\u003c\/h3\u003e\n\u003cp\u003eMultichannel preamplifier outputs feed external power amplifiers and active subwoofers. RS232, Ethernet and 12 V triggers coordinate power and control with automation systems, an important feature when electronics and amplifiers are installed in a technical rack.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and performance\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 348 mm and weighs 8.8 kg. Declared THD falls to 0.0006% in analogue bypass and signal-to-noise ratio reaches 112 dB, figures that accompany a platform designed for both cinema and high-quality multichannel listening.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Silver","offer_id":46521038340440,"sku":"00205294003","price":2799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-rsp-1576-mkii-silver-ynls1.jpg?v=1789736123"},{"product_id":"amplificatore-fonale-multicanale-c8","title":"Rotel C8","description":"\u003cp\u003e \u003cspan\u003eRotel's C8 Custom Installation amplifier benefits from 60 years of audio engineering in terms of performance, sound quality and lasting value.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eThe C8 delivers \u003cstrong\u003e70 Watts of Class AB power for 8 separate channels\u003c\/strong\u003e and into a 4 ohm connected load. Furthermore the 8 channels can be configured as a bridge for a total power of \u003cstrong\u003e140 Watts for 4 channels\u003c\/strong\u003e .\u003c\/span\u003e \u003cbr\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_00_600x600.jpg?v=1681373452\" alt=\"C8 Front\" style=\"float: none;\" data-mce-style=\"float: none;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_00_600x600.jpg?v=1681373452\"\u003e \u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eIt employs a custom made oversized toroidal transformer\u003c\/strong\u003e driving high current output transistors, fed by a series of storage and filter capacitors, which ensure deep, fast and controlled bass, across all genres of music.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eThe C8 has \u003cstrong\u003e4 analogue inputs\u003c\/strong\u003e which can be routed to any of the 8 zones with an internal matrix switching system, as well as a PA bypass function, which allows instant announcements to be made to all zones.\u003c\/span\u003e \u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_Retro_01_600x600.jpg?v=1681373482\" alt=\"C8 Back\" style=\"float: none;\" data-mce-style=\"float: none;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_Retro_01_600x600.jpg?v=1681373482\"\u003e \u003cbr\u003e\u003cspan\u003eThe display and front panel push-button controls allow input selection, independent setting for each zone of volume, bass and treble, ensuring maximum configuration flexibility, based on listening preferences, the speakers used and to the characteristics of the environment. The complete setup is also available remotely via \u003cstrong\u003eIP\/RS232,\u003c\/strong\u003e so that it can be controlled and configured even if installed in racks or in hard-to-reach technical cabinets. With the \u003cstrong\u003e12 Volt trigger control\u003c\/strong\u003e it is possible to switch it on and off remotely.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eThe speaker terminals are Phoenix-style removable safety latches and allow for pre-wired, non-reverse installations.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003eThe 2U high chassis is designed to be custom rack mounted, without the need for airflow above or below. \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll rackmount hardware is already included with the amplifier.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n\u003ch3\u003e\n\n\u003cimg data-mce-fragment=\"1\" alt=\"C8 Retro | Inside\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_Dentro_03-2_600x600.jpg?v=1681373468\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_Dentro_03-2_600x600.jpg?v=1681373468\"\u003e\u003cbr\u003e\u003cspan class=\"bold_editor\"\u003e\u003c\/span\u003e\n\n\u003c\/h3\u003e\n\n\u003ch3\u003e\n\n \u003cspan class=\"bold_editor\"\u003eTechnical features\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \u003cem\u003eMaximum power output: \u003cstrong\u003e70 W\/ch (8 channels driven, 4 Ω)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eContinuous Power Output: \u003cstrong\u003e50W\/ch (8ch driven, 8Ω)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eBridged Power Output: \u003cstrong\u003e140W\/ch (4ch driven, 4Ω)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eTotal Harmonic Distortion: \u003cstrong\u003e\u0026lt;0.1%\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eIntermodulation Distortion: \u003cstrong\u003e\u0026lt; 0.1% (60Hz : 7kHz, 4:1)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eFrequency Response: \u003cstrong\u003eLine Inputs 10Hz - 100kHz, 0 ± 0.5dB\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n \u003cli\u003e\u003cem\u003eTone Controls: \u003cstrong\u003eBass ±10dB at 100Hz Treble ±10dB at 10kHz\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eDamping Factor: \u003cstrong\u003e80 (20Hz - 20kHz, 8 ohms)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eInput Impedance\/Sensitivity \u003cstrong\u003e: Line Inputs (RCA) 0.3V \/ 31k Ω\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eInput overload level: \u003cstrong\u003eLine inputs (RCA) 2.8 V\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eSignal to Noise Ratio (IHF \"A\" weighted): \u003cstrong\u003eLine Inputs 100 dB\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eCrosstalk\/Separation: \u003cstrong\u003e\u0026gt;50dB\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003ePower supply: \u003cstrong\u003e230V, 50Hz\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eConsumption: \u003cstrong\u003e570W\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eStandby Consumption: \u003cstrong\u003eNormal \u0026lt; 0.5W Network Standby \u0026lt; 2W\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eBTU (4 Ω, 1\/8th of the rated power): \u003cstrong\u003e1537 BTU\/h\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eDimensions (W×H×D): \u003cstrong\u003e430x97x414 mm\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eFront panel height: \u003cstrong\u003e2U \/ 88.1mm\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eNet weight: \u003cstrong\u003e16.7kg\u003c\/strong\u003e\u003c\/em\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_Dentro_03_600x600.jpg?v=1681373475\" alt=\"C8 Inside | Purple\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8-suVideosell_Dentro_03_600x600.jpg?v=1681373475\"\u003e\u003c\/p\u003e","brand":"Rotel","offers":[{"title":"Default Title","offer_id":46521114067288,"sku":"00205934238","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-c8-8t5l7.jpg?v=1789027558"},{"product_id":"amplificatore-finale-multicanale-c8","title":"Rotel C8+","description":"\u003ch3\u003e \u003cspan\u003eGeneral informations\u003c\/span\u003e\n\u003c\/h3\u003e\n\n \u003cp\u003e\u003cspan\u003eRotel's C8+ Custom Installation amplifier benefits from 60 years of audio engineering, in terms of performance, sound quality and lasting value.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eThe C8+ delivers \u003cem\u003e\u003cstrong\u003e150 Watts of Class AB power for 8 separate channels\u003c\/strong\u003e\u003c\/em\u003e and into a \u003cem\u003e\u003cstrong\u003e4 ohm connected load.\u003c\/strong\u003e\u003c\/em\u003e Furthermore, the 8 channels can be bridged for a total power of \u003cem\u003e\u003cstrong\u003e300 Watts for 4 channels.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"C8+\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8__01_600x600.jpg?v=1681374278\"\u003e\u003c\/div\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eIt employs a custom made oversized toroidal transformer \u003cem\u003e\u003cstrong\u003edriving 32 high current output transistors\u003c\/strong\u003e\u003c\/em\u003e , fed by a series of storage and filter capacitors, which ensure deep, fast and controlled bass, across all genres of music.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eThe \u003cem\u003e\u003cstrong\u003eC8+ has 4 analog inputs and 4 digital inputs, 2 coaxial and 2 optical (24bit\/192kHz)\u003c\/strong\u003e\u003c\/em\u003e which can be routed to any of the \u003cstrong\u003e8 zones with an internal matrix switching system\u003c\/strong\u003e , as well as the PA bypass function, which allows to broadcast announcements instantly to all zones.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eThe display and front panel push-button controls allow input selection, independent setting for each zone of volume, bass and treble, ensuring maximum configuration flexibility, based on listening preferences, the speakers used and to the characteristics of the environment. The complete setup is also available remotely via \u003cstrong\u003eIP\/RS232,\u003c\/strong\u003e so that it can be controlled and configured even if installed in racks or in hard-to-reach technical cabinets. With the \u003cstrong\u003e12 Volt trigger\u003c\/strong\u003e control it is possible to switch it on and off remotely.\u003c\/span\u003e \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"C8+ | BACK\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8__Retro_02_600x600.jpg?v=1681374286\"\u003e\u003c\/div\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eThe speaker terminals are Phoenix-style removable safety latches and allow for pre-wired, non-reverse installations.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eThe 2U high chassis is designed to be custom rack mounted, without the need for airflow above or below. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll rackmount hardware is already included with the amplifier.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\n\u003cbr\u003e Technical features\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \u003cem\u003eMaximum power output: \u003cstrong\u003e70 W\/ch (8 channels driven, 4 Ω)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eContinuous Power Output: \u003cstrong\u003e50W\/ch (8ch driven, 8Ω)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eBridged Power Output: \u003cstrong\u003e140W\/ch (4ch driven, 4Ω)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eTotal Harmonic Distortion: \u003cstrong\u003e\u0026lt;0.1%\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eIntermodulation Distortion: \u003cstrong\u003e\u0026lt; 0.1% (60Hz : 7kHz, 4:1)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eFrequency Response: \u003cstrong\u003eLine Inputs 10Hz - 100kHz, 0 ± 0.5dB\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n \u003cli\u003e\u003cem\u003eTone Controls: \u003cstrong\u003eBass ±10dB at 100Hz Treble ±10dB at 10kHz\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eDamping Factor: \u003cstrong\u003e80 (20Hz - 20kHz, 8 ohms)\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eInput Impedance\/Sensitivity: \u003cstrong\u003eLine Inputs (RCA) 0.3V \/ 31k Ω\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eInput overload level: \u003cstrong\u003eLine inputs (RCA) 2.8 V\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eSignal to Noise Ratio (IHF \"A\" weighted): \u003cstrong\u003eLine Inputs 100 dB\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eCrosstalk\/Separation: \u003cstrong\u003e\u0026gt;50dB\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003ePower supply: \u003cstrong\u003e230V, 50Hz\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eConsumption: \u003cstrong\u003e570W\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eStandby Consumption: \u003cstrong\u003eNormal \u0026lt; 0.5W Network Standby \u0026lt; 2W\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eBTU (4 Ω, 1\/8th of the rated power): \u003cstrong\u003e1537 BTU\/h\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eDimensions (W×H×D): \u003cstrong\u003e430x97x414 mm\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eFront panel height: \u003cstrong\u003e2U \/ 88.1mm\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cem\u003eNet weight: \u003cstrong\u003e16.7kg\u003c\/strong\u003e\u003c\/em\u003e \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" alt=\"C8+ | INSIDE\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/Rotel-C8__Dentro_03_600x600.jpg?v=1681374293\"\u003e\u003c\/div\u003e","brand":"Rotel","offers":[{"title":"Default Title","offer_id":46521115279704,"sku":"00205935238","price":2880.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-c8-7x92t.jpg?v=1789026068"},{"product_id":"amplificatore-integrato-stereo-rs-6000","title":"Rotel RA-6000","description":"\u003ch2\u003eThe Diamond Series combines 350 watts, high-resolution DAC and comprehensive control\u003c\/h2\u003e\n\n\u003cp\u003eRotel RA-6000 is a Class AB integrated amplifier rated at 200 W per channel into 8 ohms and 350 W into 4 ohms, with 32-bit\/384 kHz DAC, XLR, PC-USB and MM phono.\u003c\/p\u003e\n\n\u003cp\u003eThe Diamond Series model combines a high-current output stage with a complete digital platform and analogue connectivity suited to high-level systems. The in-house toroidal transformer and slit-foil capacitors support dynamic delivery, while PC-USB, MQA, Bluetooth, Roon Tested and balanced inputs allow many sources to be concentrated in the same integrated amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 200 W per channel into 8 ohms and 350 W into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with a damping factor of 600.\u003c\/li\u003e\n  \u003cli\u003eOversized in-house toroidal transformer.\u003c\/li\u003e\n  \u003cli\u003ePremium 32-bit\/384 kHz DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB with MQA and high-resolution audio support.\u003c\/li\u003e\n  \u003cli\u003eRCA, XLR, coaxial, optical and Bluetooth aptX™ HD\/AAC inputs.\u003c\/li\u003e\n  \u003cli\u003eMM phono stage and A\/B loudspeaker outputs.\u003c\/li\u003e\n  \u003cli\u003eRoon Tested, Ethernet, RS232 and 12 V trigger.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and control\u003c\/h3\u003e\n\u003cp\u003eRA-6000 delivers 200 W per channel into 8 ohms and 350 W into 4 ohms. A damping factor of 600 highlights attention to load control, while declared THD remains below 0.0075%, combining high current and linearity in a single Class AB output stage.\u003c\/p\u003e\n\n\u003ch3\u003eDiamond power supply\u003c\/h3\u003e\n\u003cp\u003eThe large toroidal transformer is manufactured in-house by Rotel and works with selected reservoir capacitors. The supply section provides current to the output stage with substantial headroom and helps keep voltage stable during the most dynamic musical passages.\u003c\/p\u003e\n\n\u003ch3\u003eDAC and digital sources\u003c\/h3\u003e\n\u003cp\u003eThe digital section uses a premium DAC capable of operating up to 32-bit\/384 kHz. PC-USB, coaxial and optical inputs connect computers, streamers and players while keeping conversion inside the amplifier, and MQA\/MQA Studio extend compatibility with encoded files.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue inputs and XLR\u003c\/h3\u003e\n\u003cp\u003eRA-6000 provides RCA and balanced XLR inputs for high-level analogue sources. XLR offers a differential connection that is particularly useful with longer cable runs, while RCA maintains compatibility with the great majority of traditional Hi-Fi components.\u003c\/p\u003e\n\n\u003ch3\u003eMM phono\u003c\/h3\u003e\n\u003cp\u003eThe dedicated phono stage allows direct connection of a turntable with a moving-magnet cartridge. Vinyl therefore enters the same preamplification and volume-control chain as the other sources without requiring an external phono component when the cartridge is compatible.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and Roon\u003c\/h3\u003e\n\u003cp\u003eBluetooth supports aptX™ HD and AAC for wireless listening from compatible devices, while Roon Tested certification verifies the amplifier within a Roon system. These functions complement, rather than replace, the wired connections dedicated to the main sources.\u003c\/p\u003e\n\n\u003ch3\u003eControl and integration\u003c\/h3\u003e\n\u003cp\u003eEthernet, RS232 and a 12 V trigger facilitate installation in automated systems or technical racks. A and B loudspeaker outputs can manage two pairs, while the two-line display and backlit remote keep functions accessible without relying on a software interface.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and dimensions\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 431 x 144 x 425 mm and weighs 18.81 kg. Diamond Series construction separates the power supply, digital section and analogue signal path.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Black","offer_id":46521260900696,"sku":"00205930238","price":3450.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":46521260933464,"sku":"00205930003","price":3450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-ra-6000-nero-7woaw.jpg?v=1789026041"},{"product_id":"preamplificatore-stereo-p5-series-2-rotel","title":"Rotel Michi P5 S2","description":"\u003ch2\u003eMichi preamplification with dual ESS DACs and a balanced signal path\u003c\/h2\u003e\n\n\u003cp\u003eMichi P5 Serie 2 is a reference preamplifier with two ESS ES9028PRO DACs, XLR inputs, PC-USB, Bluetooth aptX™ HD and a selectable MM\/MC phono stage.\u003c\/p\u003e\n\n\u003cp\u003eThe second generation of P5 brings analogue, digital and vinyl sources together in one chassis, keeping sensitive signal paths separated and assigning conversion to two ESS DACs configured in mono. The dedicated power supply and balanced topology support a high-level system, while PC-USB, MQA, Roon Tested and Bluetooth extend compatibility with contemporary sources.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 8-channel ESS SABRE ES9028PRO DACs configured in mono.\u003c\/li\u003e\n  \u003cli\u003eAnalogue RCA and balanced XLR inputs.\u003c\/li\u003e\n  \u003cli\u003eSelectable phono stage for MM and MC cartridges.\u003c\/li\u003e\n  \u003cli\u003ePC-USB up to 32-bit\/384 kHz with DSD via DoP and MQA.\u003c\/li\u003e\n  \u003cli\u003eCoaxial and optical digital inputs up to 24-bit\/192 kHz.\u003c\/li\u003e\n  \u003cli\u003eBluetooth with aptX™ HD and AAC.\u003c\/li\u003e\n  \u003cli\u003eRoon Tested certification.\u003c\/li\u003e\n  \u003cli\u003eRCA and XLR preamplifier outputs for stereo or mono power amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDual ESS DACs\u003c\/h3\u003e\n\u003cp\u003eP5 Serie 2 uses two 8-channel ESS SABRE ES9028PRO DACs, one dedicated to the left side and one to the right. The mono configuration uses several converter sections in parallel to reduce noise and distortion.\u003c\/p\u003e\n\n\u003ch3\u003eBalanced analogue signal path\u003c\/h3\u003e\n\u003cp\u003eThe XLR inputs maintain a balanced connection with compatible sources alongside conventional RCA. The line section has a declared response from 10 Hz to 100 kHz within ±0.3 dB and signal-to-noise ratio up to 116 dB, figures suited to a preamplifier designed for reference power amplification.\u003c\/p\u003e\n\n\u003ch3\u003eMM and MC phono\u003c\/h3\u003e\n\u003cp\u003eThe phono stage can be switched for moving-magnet or moving-coil cartridges, with sensitivities of 2.5 mV and 250 µV respectively. A turntable therefore connects directly to P5 Serie 2 without an external phono preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003ePC-USB and high resolution\u003c\/h3\u003e\n\u003cp\u003eThe PC-USB input operates in USB Audio Class 2 up to 32-bit\/384 kHz and supports DSD via DoP, as well as MQA and MQA Studio. Computers and streamers can therefore use the internal conversion directly.\u003c\/p\u003e\n\n\u003ch3\u003eDigital inputs\u003c\/h3\u003e\n\u003cp\u003eCoaxial and optical connections accept LPCM signals up to 24-bit\/192 kHz. Together with PC-USB, they centralise players, streamers and other sources on the dual ESS DACs.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and Roon\u003c\/h3\u003e\n\u003cp\u003eBluetooth supports aptX™ HD and AAC for wireless listening from compatible devices, while Roon Tested certification verifies integration with Roon. Wireless functions complement the wired connections.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs and control\u003c\/h3\u003e\n\u003cp\u003eThe preamplifier outputs operate at a nominal 1 V on RCA and 2 V on XLR, allowing stereo or monoblock power amplifiers to be connected. Tone controls offer ±10 dB adjustment and can be bypassed when a more direct path is preferred, retaining flexible control of tonal balance.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply and construction\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 485 x 150 x 452 mm and weighs 22.9 kg. The power supply separates the analogue and digital sections, while Michi construction uses a rigid structure with a colour front display, keeping control, conversion and preamplification within a mechanically stable component.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration in the Michi range\u003c\/h3\u003e\n\u003cp\u003eP5 Serie 2 is designed to drive Michi power amplifiers such as S5 or a pair of M8s, using the balanced outputs for a fully XLR signal chain. Its comprehensive connectivity also allows integration into mixed systems.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":46778304954712,"sku":"00206291238","price":4000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-p5-s2-8or7i.jpg?v=1789027483"},{"product_id":"amplificatore-integrato-stereo-x3-series-2-rotel","title":"Rotel Michi X3 S2","description":"\u003ch2\u003eMichi refinement in an integrated amplifier delivering 350 watts into 4 ohms\u003c\/h2\u003e\n\n\u003cp\u003eMichi X3 Serie 2 is an integrated amplifier rated at 200 W per channel into 8 ohms and 350 W into 4 ohms, with ESS ES9028PRO DAC, PC-USB, XLR, Bluetooth aptX™ HD and MM phono.\u003c\/p\u003e\n\n\u003cp\u003eThe model combines, in a relatively compact chassis, a power section capable of handling demanding loudspeakers and a complete digital platform. The 8-channel ESS DAC handles high-resolution sources, while RCA, XLR, phono and Bluetooth allow preamplification, conversion and amplification to be concentrated in one component.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 200 W per channel into 8 ohms and 350 W into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003e8-channel, 32-bit ESS SABRE ES9028PRO DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB up to PCM 32-bit\/384 kHz.\u003c\/li\u003e\n  \u003cli\u003eDSD via DoP, MQA and MQA Studio support.\u003c\/li\u003e\n  \u003cli\u003eRCA, XLR, coaxial and optical inputs.\u003c\/li\u003e\n  \u003cli\u003eBluetooth with aptX™ HD and AAC.\u003c\/li\u003e\n  \u003cli\u003eDedicated phono stage for MM cartridges.\u003c\/li\u003e\n  \u003cli\u003eRoon Tested certification and preamplifier output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and control\u003c\/h3\u003e\n\u003cp\u003eX3 Serie 2 delivers 200 W per channel into 8 ohms and 350 W into 4 ohms, with THD below 0.008%. The damping factor of 350 indicates a power section designed to maintain control over woofers and more demanding loads.\u003c\/p\u003e\n\n\u003ch3\u003eFrequency response\u003c\/h3\u003e\n\u003cp\u003eThe line inputs cover 10 Hz to 100 kHz within +0\/-0.4 dB; the digital inputs operate from 20 Hz to 20 kHz within ±0.4 dB. The phono stage maintains full audio bandwidth for integrating vinyl into the same system.\u003c\/p\u003e\n\n\u003ch3\u003eESS DAC\u003c\/h3\u003e\n\u003cp\u003eConversion uses an 8-channel, 32-bit ESS SABRE ES9028PRO. It belongs to the same DAC family used in the more powerful X5 Serie 2, retaining a high-level digital section in this integrated amplifier as well.\u003c\/p\u003e\n\n\u003ch3\u003ePC-USB\u003c\/h3\u003e\n\u003cp\u003eThe PC-USB input operates in USB Audio Class 2 up to 32-bit\/384 kHz and supports DSD via DoP. MQA and MQA Studio are also supported, allowing direct connection to computers and software-based sources.\u003c\/p\u003e\n\n\u003ch3\u003eDigital inputs\u003c\/h3\u003e\n\u003cp\u003eCoaxial and optical inputs accept SPDIF LPCM up to 24-bit\/192 kHz. Players, streamers and televisions can therefore use the internal DAC of X3 Serie 2 instead of the conversion stage built into the source.\u003c\/p\u003e\n\n\u003ch3\u003eRCA and XLR\u003c\/h3\u003e\n\u003cp\u003eThe line inputs include RCA and balanced XLR, with sensitivities of 340 mV and 540 mV respectively. XLR allows a balanced connection with compatible sources, particularly useful with longer cable runs.\u003c\/p\u003e\n\n\u003ch3\u003eMM phono\u003c\/h3\u003e\n\u003cp\u003eThe phono stage is dedicated to moving-magnet cartridges, with 5.2 mV sensitivity and 47 kOhm input impedance. A compatible turntable can therefore be connected directly without adding an external phono preamplifier.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and Roon\u003c\/h3\u003e\n\u003cp\u003eBluetooth supports aptX™ HD and AAC, while Roon Tested certification facilitates integration of the amplifier into a Roon system. Wireless functions complement, rather than replace, the wired connections.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and integration\u003c\/h3\u003e\n\u003cp\u003eX3 Serie 2 measures 485 x 150 x 452 mm and weighs 28.9 kg. The preamplifier output allows the system to be expanded with external power amplifiers, while retaining the integrated amplifier as the source control centre.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":46778331660632,"sku":"00206289238","price":4790.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-x3-s2-7w7ev.jpg?v=1789026018"},{"product_id":"amplificatori-integrati-stereo-x5-series-2-rotel","title":"Rotel Michi X5 S2","description":"\u003ch2\u003ePrecision, control and power at the highest level of Michi\u003c\/h2\u003e\n\n\u003cp\u003eMichi X5 Serie 2 is a Class AB integrated amplifier rated at 350 W per channel into 8 ohms and 600 W into 4 ohms, with ESS ES9028PRO DAC, XLR, PC-USB and MM\/MC phono.\u003c\/p\u003e\n\n\u003cp\u003eTwo oversized toroidal transformers power an output section designed for demanding loudspeakers, while the 8-channel ESS DAC handles high-resolution digital sources. The connectivity includes analogue, balanced and phono inputs, allowing the integrated amplifier to bring much of the Hi-Fi chain together in a single chassis.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous power of 350 W per channel into 8 ohms and 600 W into 4 ohms.\u003c\/li\u003e\n  \u003cli\u003eClass AB amplification with a damping factor of 350.\u003c\/li\u003e\n  \u003cli\u003eDual oversized and shielded toroidal transformers.\u003c\/li\u003e\n  \u003cli\u003e8-channel, 32-bit ESS SABRE ES9028PRO DAC.\u003c\/li\u003e\n  \u003cli\u003ePC-USB up to PCM 32-bit\/384 kHz, DSD 4X and MQA.\u003c\/li\u003e\n  \u003cli\u003eRCA, XLR, coaxial, optical and Bluetooth aptX™ HD\/AAC inputs.\u003c\/li\u003e\n  \u003cli\u003eSelectable phono stage for MM and MC cartridges.\u003c\/li\u003e\n  \u003cli\u003eRoon Tested certification and preamplifier outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower and drive capability\u003c\/h3\u003e\n\u003cp\u003eWith 350 W per channel into 8 ohms and 600 W into 4 ohms, X5 Serie 2 retains substantial reserve even with complex loads. The damping factor of 350 helps control the woofers, while declared THD remains below 0.009%.\u003c\/p\u003e\n\n\u003ch3\u003eClass AB\u003c\/h3\u003e\n\u003cp\u003eThe output stage operates in Class AB and favours continuity and control across the dynamic range. The line inputs have a declared response from 10 Hz to 100 kHz, indicating an analogue signal path designed with very wide bandwidth.\u003c\/p\u003e\n\n\u003ch3\u003eDual power supply\u003c\/h3\u003e\n\u003cp\u003eTwo oversized, shielded, low-noise toroidal transformers supply current to the audio section. Rotel manufactures them in-house and sizes them to reduce vibration and magnetic leakage while maintaining substantial reserve.\u003c\/p\u003e\n\n\u003ch3\u003eESS DAC\u003c\/h3\u003e\n\u003cp\u003eDigital conversion uses an 8-channel, 32-bit ESS SABRE ES9028PRO. The multi-channel configuration is employed to improve precision and signal-to-noise ratio, making an external DAC unnecessary in many systems.\u003c\/p\u003e\n\n\u003ch3\u003ePC-USB\u003c\/h3\u003e\n\u003cp\u003eThe PC-USB input supports PCM up to 32-bit\/384 kHz, DSD 4X up to 11.2 MHz and MQA\/MQA Studio. Coaxial and optical inputs accept LPCM up to 24-bit\/192 kHz for players, streamers and other digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue and phono\u003c\/h3\u003e\n\u003cp\u003eRCA and balanced XLR inputs are provided alongside a selectable MM or MC phono stage. A turntable can therefore be connected directly to the integrated amplifier together with analogue line sources and balanced components.\u003c\/p\u003e\n\n\u003ch3\u003eBluetooth and Roon\u003c\/h3\u003e\n\u003cp\u003eBluetooth supports aptX™ HD and AAC for compatible sources, while Roon Tested certification facilitates integration with Roon. Wireless functions remain complementary to the wired connections intended for the main sources.\u003c\/p\u003e\n\n\u003ch3\u003eOutputs and controls\u003c\/h3\u003e\n\u003cp\u003eThe preamplifier outputs allow external power amplifiers to be added or the system to be expanded. Tone controls provide ±10 dB adjustment at 100 Hz and 10 kHz, retaining simple analogue control over tonal balance.\u003c\/p\u003e\n\n\u003ch3\u003eChassis and integration\u003c\/h3\u003e\n\u003cp\u003eThe chassis measures 485 x 195 x 452 mm and weighs 43.8 kg. A front display, remote control and system interfaces complete a robust construction suited to its role as the electronic centre of a Michi system.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Default Title","offer_id":46778352271704,"sku":"00206290238","price":6350.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-michi-x5-s2-7vmby.jpg?v=1789025996"},{"product_id":"rotel-cd11-mkii","title":"Rotel CD-11 MKII","description":"\u003ch2\u003ePrecise CD playback, dedicated conversion and a low-noise audio path\u003c\/h2\u003e\n\n\u003cp\u003eRotel CD-11 MKII is a CD player with a Rotel CD mechanism in a steel chassis with smooth tray and low-noise motor, 32-bit\/384 kHz Texas Instruments PCM5102A DAC and RCA analogue outputs, designed to reproduce optical media through a dedicated chain.\u003c\/p\u003e\n\n\u003cp\u003eThe design separates the mechanism, servo and power supply from the sensitive audio sections. A 32-bit\/384 kHz Texas Instruments PCM5102A DAC converts the signal for the analogue outputs, while a coaxial digital output also allows the player to be used as a transport into an external DAC. The front display can show metadata such as title and artist when present, and a 12 V trigger coordinates power with other components.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRotel CD mechanism in a steel chassis with smooth tray and low-noise motor.\u003c\/li\u003e\n  \u003cli\u003e32-bit\/384 kHz Texas Instruments PCM5102A DAC.\u003c\/li\u003e\n  \u003cli\u003eRCA analogue outputs.\u003c\/li\u003e\n  \u003cli\u003eCoaxial digital output.\u003c\/li\u003e\n  \u003cli\u003eAudio CD playback and MP3 files on compatible media.\u003c\/li\u003e\n  \u003cli\u003eDeclared THD of 0.009%.\u003c\/li\u003e\n  \u003cli\u003eSignal-to-noise ratio above 125 dB.\u003c\/li\u003e\n  \u003cli\u003e430 x 98 x 314 mm chassis weighing 6.2 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDisc mechanism\u003c\/h3\u003e\n\u003cp\u003eThe Rotel CD mechanism uses a steel chassis, smooth tray and low-noise motor. The optical assembly and motor are designed to track the disc precisely while limiting vibration and mechanical noise, so the digital signal is extracted under stable conditions before reaching the converter or digital output.\u003c\/p\u003e\n\n\u003ch3\u003eInternal DAC\u003c\/h3\u003e\n\u003cp\u003eA 32-bit\/384 kHz Texas Instruments PCM5102A DAC feeds the analogue outputs and allows the player to be used as a complete source without requiring an external DAC. The converter and output filters are integrated with the power supply and analogue layout.\u003c\/p\u003e\n\n\u003ch3\u003ePower supply and layout\u003c\/h3\u003e\n\u003cp\u003eThe sections dedicated to the motor, servo and audio circuits are managed to reduce mutual interference. Separating these paths limits noise that could reach the DAC and analogue stages and keeps the player focused on accurate reproduction of optical media.\u003c\/p\u003e\n\n\u003ch3\u003eAnalogue outputs\u003c\/h3\u003e\n\u003cp\u003eRCA analogue outputs carry the converted signal directly to an integrated amplifier or preamplifier, using the player's DAC and output stages as an active part of the audio chain.\u003c\/p\u003e\n\n\u003ch3\u003eDigital output\u003c\/h3\u003e\n\u003cp\u003eThe coaxial digital output allows CD-11 MKII to operate as a pure CD transport, leaving conversion to an external DAC, digital preamplifier or integrated amplifier equipped with its own converter.\u003c\/p\u003e\n\n\u003ch3\u003eFormats and playback\u003c\/h3\u003e\n\u003cp\u003eAudio CDs and MP3 files on compatible media can be reproduced. Playback functions remain centred on the disc, with track management from the front panel and remote and, where available, display of media information.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and chassis\u003c\/h3\u003e\n\u003cp\u003eDeclared THD is 0.009% and signal-to-noise ratio is above 125 dB. The chassis measures 430 x 98 x 314 mm and weighs 6.2 kg, providing a stable base for the mechanism while keeping the power-supply area separated from the analogue stages.\u003c\/p\u003e\n","brand":"Rotel","offers":[{"title":"Nero","offer_id":47327037456728,"sku":"00206353238","price":439.0,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":47327037489496,"sku":"00206353003","price":439.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-cd-11-mkii-nero-7uzi3.jpg?v=1789025965"},{"product_id":"rotel-rb-1590-copia","title":"Rotel RB-1590 EX-DEMO","description":"\u003cp\u003e 350+350 W RMS stereo power amplifier into 8ohm\u003c\/p\u003e\n\u003cbr\u003e --\u003cbr\u003e \u003cp\u003eThe RB-1590 is the real showpiece of its range: a 2 x 350W stereo amplifier, with dual toroidal transformers and special notched film capacitors. \u003c\/p\u003e\n\n\u003cdiv class=\"field field-name-field-product-callouts field-type-text-long field-label-hidden\"\u003e\n\n\u003cdiv class=\"field-items\"\u003e\n\n\u003cdiv class=\"field-item even\"\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rotel-feature%20icons_ab-power.png\" alt=\"Power\" width=\"97\" height=\"60\"\u003e 2 x 350W high power \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rotel-feature%20icons_class-a-b-audio.png\" alt=\"Class AB\" width=\"77\" height=\"60\"\u003e Class AB amplifier design \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rotel-feature%20icons_dual-toroidal-transformer.png\" alt=\"To commute\" width=\"60\" height=\"60\"\u003e Effective power supply thanks to double toroidal transformers \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rotel-feature%20icons_slit-foil-capacitors.png\" alt=\"Capacitor\" width=\"60\" height=\"60\"\u003e High quality notched film capacitors made in Great Britain \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rotel-feature%20icons_balanced-xlr_0.png\" alt=\"XLR\" width=\"60\" height=\"60\"\u003e Balanced XLR inputs \u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"product-specs clearfix\"\u003e\n\n\u003cdiv class=\"field field-name-field-specifications field-type-text-long field-label-hidden\"\u003e\n\n\u003cdiv class=\"field-items\"\u003e\n\n\u003cdiv class=\"field-item even\"\u003e\n\n\u003ch2\u003e Carefully designed. \u003c\/h2\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" title=\"\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rb1590_guts.png\" alt=\"RB-1590 Vista interne\" width=\"182\" height=\"208\"\u003e\u003c\/p\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eDimensions (W × H × D)\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 431×237×454mm\u003cbr\u003e 17\" × 9.75\" × 17.9\"\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eFront Panel Height\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 5U \/ 221mm (8.75\")\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eDiet\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 230V, 50Hz\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eAbsorption\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 800W\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eStandby \u003cstrong\u003e\u003cstrong\u003eabsorption\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 0.5W\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eNet weight\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 38.1kg (84lbs.)\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n \u003cstrong\u003eBTU\u003c\/strong\u003e (4Ω, 1\/8 of Rated Power)\u003c\/div\u003e\n\n\u003cdiv\u003e 2100 BTU\/h \u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"field-item odd\"\u003e\n\n\u003cp\u003e\u003cimg class=\"media-image\" title=\"\" src=\"http:\/\/www.rotel.com\/sites\/default\/files\/rotelparts-specs-bigamp.png\" alt=\"Componente\" width=\"220\" height=\"164\"\u003e\u003c\/p\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eContinuous power output\u003c\/strong\u003e\n\u003c\/div\u003e\n\n \u003cdiv\u003e350W\/Ch ( \u003cspan id=\"result_box\" class=\"short_text\" xml:lang=\"it\" lang=\"it\"\u003e\u003cspan class=\"hps\"\u003eAll channels\u003c\/span\u003e \u003cspan class=\"hps\"\u003edriven\u003c\/span\u003e\u003c\/span\u003e , 8Ω)\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eTotal Harmonic Distortion\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e (20Hz–20kHz) \u0026lt;0.03%\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eFrequency Response\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e 10Hz - 100kHz ±0.5dB\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eSignal to noise ratio\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e (A-weighted IHF)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 120dB\u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cstrong\u003eI earn\u003c\/strong\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e RCA: 27.5dB\u003c\/div\u003e\n\n\u003cdiv\u003e XLR: 23.5dB \u003c\/div\u003e\n\n\u003cdiv\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv class=\"field-items\"\u003e\n\n\u003cdiv class=\"field-item even\"\u003e\n\n\u003cp\u003e Power - refined, detailed and in quantity. Rotel's new Class AB stereo amplifier is rated at 350 watts per channel into 8 ohms with both channels operating. That's a lot of power, but large rooms or less sensitive speakers demand it for maximum performance and realistic audio dynamics.\u003c\/p\u003e\n\n \u003cp\u003eThe impressive capabilities of this amplifier begin with a solid foundation of rugged dual toroidal transformers manufactured by Rotel. These transformers are part of an indestructible power supply comprising eight British made special BHC capacitors, known for their low losses and fast response times. These components will continue to supply all the necessary voltage and current, even under the most difficult load conditions.\u003c\/p\u003e\n\n\u003cp\u003e But unrefined power has never been a Rotel design goal. Every aspect of circuit design has been carefully considered and every component has been rigorously selected after extensive listening sessions. The topography of the circuits has been conceived according to a true one-piece design that guarantees maximum signal separation and better stereo imaging.\u003c\/p\u003e\n\n \u003cp\u003eFeatures include: balanced XLR and RCA input connectors, two pairs of 5-way speaker binding posts, 12-volt trigger, thermal protection circuit, over-current and over-voltage protection circuitry, dual-stage power on relays to reduce surges and increase life and detachable IEC power cord – all in a 5U chassis with included rack flaps.\u003c\/p\u003e\n\n\u003cp\u003e The RB-1590 has been designed with the serious enthusiast in mind and is capable of delivering the highest levels of audio performance. \u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e","brand":"Rotel","offers":[{"title":"Black","offer_id":58354128716120,"sku":"ROT001","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/rotel-RB_1590-su-videosell-01.jpg?v=1779714160"}],"url":"https:\/\/videosell.fr\/collections\/offerte-flash.oembed","provider":"Videosell store","version":"1.0","type":"link"}