{"title":"Diffusori da incasso Bowers\u0026Wilkins","description":"","products":[{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm665","title":"B\u0026W CCM665","description":"\u003ch2\u003eA straightforward two-way for extra zones\u003c\/h2\u003e\n\u003cp\u003eCCM665 keeps installation simple while using a 150 mm driver.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM665 pair fits 202 mm circular cut-outs. Each frame measures 240 mm, the speaker extends 133 mm behind the ceiling and its visible edge protrudes by 4 mm. These measurements still matter in kitchens and secondary rooms: straightforward fitting does not remove the need to check the void behind the panel.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm glass-fibre bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–130 W recommended.\u003c\/li\u003e\n  \u003cli\u003eQuickDogs; plug-and-play fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA simpler configuration\u003c\/h3\u003e\n\u003cp\u003eThe two-way design combines a 150 mm woven glass-fibre bass\/midrange cone with a 25 mm soft-dome tweeter. QuickDogs secure the circular chassis and the connection is designed to simplify fitting. CCM664 uses a similar driver family and mounting footprint, but adds a tilting tweeter and three-position EQ. CCM665 is the more direct arrangement.\u003c\/p\u003e\n\u003ch3\u003eElectrical and building plan\u003c\/h3\u003e\n\u003cp\u003eAn 8-ohm nominal impedance with a 4.5-ohm minimum is paired with 87 dB sensitivity. Recommended amplification runs from 25 to 130 W; the -6 dB range is 45 Hz to 35 kHz. A C6 pre-mount kit and 6C back box are listed. Position both speakers for the area to be covered, then check openings, rear clearance and cable routes before closing the ceiling.\u003c\/p\u003e\n\u003cp\u003eBecause this model has no stated tweeter adjustment, the pair's position should be chosen carefully in the room plan. Its low-profile visible edge keeps the ceiling discreet, while the fixings allow fitting from the room side. Leave enough clearance from obstructions in the void to install and wire each unit. The identical cut-out to CCM664 makes that comparison practical before the openings are made.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729522877,"sku":"FP29599","price":540.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm665-front-cakmh.jpg?v=1790524288"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm664","title":"B\u0026W CCM664","description":"\u003ch2\u003eSoft-dome treble with an aimable housing\u003c\/h2\u003e\n\u003cp\u003eCCM664 offers a tilting tweeter in a two-way ceiling layout.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM664 pair uses 202 mm openings. Each unit has a 240 mm frame, takes up 133 mm behind the panel and projects 4 mm into the room. These dimensions match several other CCM models, so driver configuration and listening positions become the important selection criteria.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm glass-fibre bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–130 W recommended.\u003c\/li\u003e\n  \u003cli\u003etiltable offset tweeter; three-position EQ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIts distinguishing adjustment\u003c\/h3\u003e\n\u003cp\u003eThe offset 25 mm soft-dome tweeter can be tilted, and a three-position EQ helps manage off-axis response. A 150 mm woven glass-fibre cone handles bass and midrange. CCM663 shares similar mounting dimensions but uses a Nautilus aluminium dome and an Aramid Fibre cone. CCM665 keeps the glass-fibre and soft-dome combination without the tilting adjustment described for CCM664.\u003c\/p\u003e\n\u003ch3\u003ePreparing the ceiling\u003c\/h3\u003e\n\u003cp\u003eNominal impedance of 8 ohms, a 4.5-ohm minimum, 87 dB sensitivity and 25 to 130 W recommended amplification guide electrical matching. The -6 dB range is 45 Hz to 35 kHz. A C6 kit and 6C back box are listed. Measure the clear depth and plan where to aim the tweeter before closing the ceiling: its adjustment is useful when the cut-out cannot be centred over the listener.\u003c\/p\u003e\n\u003cp\u003eWhen speaker positions must align with ceiling features, the tilting tweeter helps reconcile visual symmetry and sound direction. There is no need to shift a cut-out solely to compensate for off-centre seating if the tweeter and EQ can provide the required adjustment. Check the actual ceiling void and place the controls where they can be reached during final setup.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729555645,"sku":"FP29580","price":628.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm664-front-mhino.jpg?v=1790524260"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm663","title":"B\u0026W CCM663","description":"\u003ch2\u003eAn adjustable two-way in the ceiling\u003c\/h2\u003e\n\u003cp\u003eCCM663 lets the treble direction be refined once the mounting position is set.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM663 pair requires a 202 mm circular opening for each speaker. The 240 mm frame needs 133 mm of depth behind the surface and protrudes by 4 mm at the front. It suits installations where the ceiling structure fixes the position but the high frequencies should still be directed towards the listening seats.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm Aramid Fibre bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–130 W recommended.\u003c\/li\u003e\n  \u003cli\u003epivoting tweeter; three-position EQ; QuickDogs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTweeter and bass\/midrange\u003c\/h3\u003e\n\u003cp\u003eThe 25 mm Nautilus aluminium dome has a pivoting housing, while a three-position EQ switch adjusts off-axis response. A 150 mm Aramid Fibre cone driver sits in a die-cast chassis. CCM663RD follows a similar approach at only 92 mm deep, compared with 133 mm here; that distinction matters in a shallow ceiling void.\u003c\/p\u003e\n\u003ch3\u003eMatching and fitting\u003c\/h3\u003e\n\u003cp\u003eSensitivity is 88 dB, nominal impedance 8 ohms with a 4.5-ohm minimum, and recommended amplifier power 25 to 130 W. The -6 dB range is 45 Hz to 50 kHz. QuickDogs fixings assist installation in the cut-out. A C6 pre-mount kit and 6C back box are listed for preparation. Allow access to the terminals and check the clear space above the panel before finishing it.\u003c\/p\u003e\n\u003cp\u003eThe two cut-outs define the pair's coverage, but treble direction need not stay fixed with the frame position. That helps where joists or services force the mounting points away from the ideal listening axis. The EQ control provides a further adjustment without changing the opening. Plan access to these controls during final commissioning and keep the two speaker orientations consistent with the listening area.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729588413,"sku":"FP29572","price":718.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm663-front-fhcko.jpg?v=1790524219"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm662","title":"B\u0026W CCM662","description":"\u003ch2\u003eAim the treble from the ceiling\u003c\/h2\u003e\n\u003cp\u003eCCM662 pairs a pivoting tweeter with an off-axis response control.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM662 pair fits 202 mm cut-outs and needs 133 mm of free depth behind the ceiling. Each frame measures 240 mm across and projects by 4 mm. Check that clearance before deciding where the pair will go, particularly if the listening area is away from the speakers' vertical axes.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm Aramid Fibre bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–150 W recommended.\u003c\/li\u003e\n  \u003cli\u003epivoting tweeter; three-position EQ; die-cast chassis; gold-plated terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShaping coverage\u003c\/h3\u003e\n\u003cp\u003eThe 25 mm Nautilus aluminium-dome tweeter pivots towards the audience. A three-position EQ switch provides a further adjustment to off-axis response. The 150 mm Aramid Fibre bass\/midrange cone sits in a rigid die-cast chassis, and the terminals are gold plated. Compared with CCM663, the recommended upper amplifier power is 150 W rather than 130 W.\u003c\/p\u003e\n\u003ch3\u003eFigures for system planning\u003c\/h3\u003e\n\u003cp\u003eNominal impedance is 8 ohms with a 4.5-ohm minimum, while sensitivity is 88 dB. The -6 dB range runs from 45 Hz to 50 kHz and recommended amplifier power spans 25 to 150 W. QuickDogs fixings and plug-and-play connection simplify fitting. A C6 pre-mount kit and 6C back box are specified; check the installation accessories alongside the available ceiling depth.\u003c\/p\u003e\n\u003cp\u003eThe higher 150 W recommended limit gives more power headroom than the 130 W variants while retaining the same 202 mm cut-out. For off-centre listening, the pivoting dome and EQ are two distinct adjustments: aim the tweeter towards the seats, then choose the EQ setting to suit the resulting geometry. This is particularly useful when the ceiling forces an asymmetric layout.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729621181,"sku":"FP29564","price":1078.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm662-front-hgabd.jpg?v=1790524204"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm664sr","title":"B\u0026W CCM664SR","description":"\u003ch2\u003eStereo from one opening\u003c\/h2\u003e\n\u003cp\u003eCCM664SR combines two channels in one ceiling speaker.\u003c\/p\u003e\n\u003cp\u003eThe single Bowers \u0026 Wilkins CCM664SR uses a 202 mm cut-out, requires 133 mm behind the surface and has a 240 mm frame with 4 mm front projection. It suits a zone where two separate mounting points would be difficult or excessive. Wiring still carries two channels even though only one speaker is visible.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm twin-voice-coil glass-fibre bass\/midrange and two 20 mm soft-dome tweeters.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4 ohm minimum per channel; power: 25–80 W per channel recommended.\u003c\/li\u003e\n  \u003cli\u003estereo\/surround switch; QuickDogs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe SR arrangement\u003c\/h3\u003e\n\u003cp\u003eA twin-voice-coil 150 mm glass-fibre bass\/midrange driver works with two offset soft-dome tweeters. The stereo\/surround selector adapts the unit to the role of the zone. Compared with standard CCM664, this is a change in channel configuration, not merely an alternative finish.\u003c\/p\u003e\n\u003ch3\u003eSystem figures\u003c\/h3\u003e\n\u003cp\u003eRecommended amplifier power is 25 to 80 W per channel and nominal impedance 8 ohms per channel, with a 4-ohm minimum. Sensitivity is 82 dB per channel, or 88 dB with both driven. The -6 dB range is 48 Hz to 30 kHz. QuickDogs fittings aid installation; a C6 kit and 6C back box are listed.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729653949,"sku":"FP29610","price":432.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm664sr-front-iegco.jpg?v=1790524274"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm663sr","title":"B\u0026W CCM663SR","description":"\u003ch2\u003eTwo channels in one ceiling position\u003c\/h2\u003e\n\u003cp\u003eCCM663SR brings stereo to a zone served by a single cut-out.\u003c\/p\u003e\n\u003cp\u003eThe single Bowers \u0026 Wilkins CCM663SR speaker contains two channels. It fits a 202 mm opening in a 240 mm frame and needs 133 mm behind the ceiling; front protrusion is 4 mm. One unit can therefore cover an area where installing a spaced pair is impractical, without dropping either channel of a stereo programme.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm twin-voice-coil Aramid Fibre bass\/midrange and two 20 mm soft-dome tweeters.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4 ohm minimum per channel; power: 25–80 W per channel recommended.\u003c\/li\u003e\n  \u003cli\u003estereo\/surround switch; dual-channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat SR changes\u003c\/h3\u003e\n\u003cp\u003eA 150 mm Aramid Fibre bass\/midrange driver uses twin voice coils, accompanied by two offset soft-dome tweeters. The two-position switch selects stereo or surround operation. This distinguishes the SR version from the ordinary single-channel CCM663 with its pivoting tweeter. Plan the wiring and amplification for both channels of the SR model.\u003c\/p\u003e\n\u003ch3\u003eElectrical and fitting data\u003c\/h3\u003e\n\u003cp\u003eRecommended amplifier power is 25 to 80 W per channel. Nominal impedance is 8 ohms per channel, falling to 4 ohms; sensitivity is 83 dB per channel or 89 dB with both driven. The -6 dB range runs from 48 Hz to 30 kHz. The C6 pre-mount kit and 6C back box are specified. Decide whether the zone will operate in stereo or surround before fitting and provide the connections needed by that configuration.\u003c\/p\u003e\n\u003cp\u003eFor a single-speaker zone, there is no need to choose between carrying left or right: the twin voice coils accommodate both. Surround mode provides another use for the same physical unit, rather than turning it into a pair. Sensitivity is specified separately for one channel and for both driven, so use the appropriate figure when estimating system level and leave the wiring accessible for commissioning.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729686717,"sku":"FP29602","price":539.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm663sr-front-edfne.jpg?v=1790524246"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-wccm684","title":"B\u0026W CCM684","description":"\u003ch2\u003eThe larger soft-dome two-way\u003c\/h2\u003e\n\u003cp\u003eCCM684 uses a 200 mm driver yet keeps treble direction adjustable.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM684 pair fits 250 mm cut-outs beneath 290 mm diameter frames. It needs 133 mm of clear depth behind the ceiling and projects 4 mm into the room. The visible frame diameter belongs in the architectural plan as much as the opening: locate both positions before settling the lighting layout.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 250 mm; frame 290 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 200 mm glass-fibre bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–130 W recommended.\u003c\/li\u003e\n  \u003cli\u003epivoting tweeter; three-position EQ; QuickDogs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA different material combination\u003c\/h3\u003e\n\u003cp\u003eThe 200 mm bass\/midrange cone uses woven glass fibre and the 25 mm tweeter has a soft dome. Its housing pivots to direct treble towards the listening area; three-position EQ gives further control off axis. Compared with CCM683 at the same cut-out size, both driver materials change. The opening alone therefore does not decide between these models.\u003c\/p\u003e\n\u003ch3\u003eFitting and system data\u003c\/h3\u003e\n\u003cp\u003eCCM684 has 8-ohm nominal impedance, a 4.5-ohm minimum, 88 dB sensitivity and 25 to 130 W recommended amplifier power. Its -6 dB range runs from 35 Hz to 35 kHz. QuickDogs ease fitting; the C8 kit and 6C back box are listed for preparation. Check the void behind each opening and leave space to make connections before securing the chassis to the panel.\u003c\/p\u003e\n\u003cp\u003eThe glass-fibre cone and soft dome retain the large bass\/midrange diameter without the Aramid Fibre and aluminium combination of the other 200 mm variants. Sensitivity is 88 dB, the same as CCM683. During commissioning, aim the dome and assess which of the three EQ settings best suits the seats. The listed cut-out and depth remain the first practical checks before any panel is cut.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795729719485,"sku":"FP29645","price":718.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm684-front-iakpp.jpg?v=1790524331"},{"product_id":"diffusore-a-2-vie-da-parete-b-w-cwm652","title":"B\u0026W CWM652","description":"\u003ch2\u003eA 130 mm driver in a narrow opening\u003c\/h2\u003e\n\u003cp\u003eCWM652 packs a Nautilus tweeter and HF adjustment into a 228 × 153 mm cut-out.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM652 pair needs two rectangular 228 × 153 mm openings. Each frame is 264 × 191 mm, with 95 mm of clear depth behind the wall and 4 mm front protrusion. This is the narrowest Performance CWM format here, useful where stud spacing limits the width of the cut.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 228 × 153 mm; frame 264 × 191 mm; depth 95 mm.\u003c\/li\u003e\n  \u003cli\u003e130 mm Kevlar bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (4.5-ohm minimum); 25–100 W specified power.\u003c\/li\u003e\n  \u003cli\u003eThree-position HF switch; QuickDogs; PMK W5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTreble adjustment\u003c\/h3\u003e\n\u003cp\u003eThe 130 mm Kevlar bass\/midrange driver has a die-cast chassis, while a 25 mm aluminium-dome tweeter uses Nautilus tube loading. A three-position switch refines high-frequency output. CWM663 steps up to a 150 mm driver and larger cut-out; CWM652 retains a more compact footprint for distributed rooms or several channels.\u003c\/p\u003e\n\u003ch3\u003eElectrical and fitting figures\u003c\/h3\u003e\n\u003cp\u003eSensitivity is 86 dB and nominal impedance 8 ohms with a 4.5-ohm minimum. Amplifier power is specified at 25 to 100 W and the -6 dB range is 54 Hz to 50 kHz. QuickDogs and a convenient connection help fitting. PMK W5 is the pre-mount kit and BB 6W the listed back box; allow room for these and access to the terminals before finishing the wall.\u003c\/p\u003e\n\u003cp\u003eThe 153 mm cut-out width helps where usable wall space is limited, but the full 191 mm frame must clear features on the room side. The HF control provides a way to refine the result near furnishings or reflective surfaces without recutting the wall. Evaluate the setting with the pair installed in the finished room, and keep enough access for final adjustments. The 95 mm cavity depth must remain unobstructed behind each opening.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730211005,"sku":"FP29653","price":810.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm652-front-ndgei.jpg?v=1790524408"},{"product_id":"diffusore-a-2-vie-da-parete-b-w-cwm664","title":"B\u0026W CWM664","description":"\u003ch2\u003eA different sound from the same opening\u003c\/h2\u003e\n\u003cp\u003eCWM664 uses glass fibre and a soft dome in CWM663-sized cut-outs.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM664 pair occupies 279 × 183 mm rectangular openings. Each frame is 315 × 221 mm, with 95 mm behind the surface and 4 mm visible protrusion. Those dimensions match CWM663: where openings are already planned, acoustic configuration and amplifier rating are the deciding factors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 279 × 183 mm; frame 315 × 221 mm; depth 95 mm.\u003c\/li\u003e\n  \u003cli\u003e150 mm glass-fibre bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (4.5-ohm minimum); 25–130 W specified power.\u003c\/li\u003e\n  \u003cli\u003eThree-position HF switch; QuickDogs; PMK W6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterials and control\u003c\/h3\u003e\n\u003cp\u003eThe 150 mm bass\/midrange driver has a woven glass-fibre cone, while the 25 mm tweeter is a soft dome. A three-position switch adjusts treble. CWM663 instead uses Aramid Fibre and Nautilus aluminium, with a 150 W upper figure against 130 W here. QuickDogs simplify fixing to the panel.\u003c\/p\u003e\n\u003ch3\u003ePrecise preparation\u003c\/h3\u003e\n\u003cp\u003eSpecified amplifier power is 25 to 130 W, sensitivity 87.5 dB and nominal impedance 8 ohms with a 4.5-ohm minimum. The -6 dB range is 45 Hz to 35 kHz. PMK W6 and BB 6W are listed for fitting. Before cutting, check the alignment of both speakers, stud positions and cable route; the treble control can then be adjusted to suit the finished room.\u003c\/p\u003e\n\u003cp\u003eAt 87.5 dB, sensitivity falls between CWM652's 86 dB and CWM663's 88 dB. This matters when balancing several channels that use different drivers. The 279 × 183 mm cut-out must be planned alongside the 315 × 221 mm frame, which may meet trim, architectural details or a screen. Leave the high-frequency selector accessible for final adjustment after the wall is complete. Check the 95 mm rear clearance behind both speakers, too. The frame must also remain clear of any wall trim.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730243773,"sku":"FP29681","price":628.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm664-front-encpj.jpg?v=1790524436"},{"product_id":"diffusore-a-2-vie-da-parete-b-w-cwm663","title":"B\u0026W CWM663","description":"\u003ch2\u003eA larger driver within the wall\u003c\/h2\u003e\n\u003cp\u003eCWM663 moves to a 150 mm Aramid Fibre cone and Nautilus tweeter.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM663 pair requires two 279 × 183 mm wall cut-outs. Each frame measures 315 × 221 mm, with 95 mm behind the panel and 4 mm front projection. Its dimensions match CWM664, so driver choices and adjustment options matter more than the size of the opening when selecting between them.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 279 × 183 mm; frame 315 × 221 mm; depth 95 mm.\u003c\/li\u003e\n  \u003cli\u003e150 mm Aramid Fibre bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (4.5-ohm minimum); 25–150 W specified power.\u003c\/li\u003e\n  \u003cli\u003eThree-position HF switch; QuickDogs; PMK W6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe CWM663 components\u003c\/h3\u003e\n\u003cp\u003eA 150 mm Aramid Fibre driver sits in a die-cast chassis. The 25 mm Nautilus aluminium-dome tweeter works with a three-position high-frequency switch. Compared with CWM652, the driver increases from 130 to 150 mm, the upper stated power rises from 100 to 150 W, and both cut-out dimensions grow.\u003c\/p\u003e\n\u003ch3\u003eFigures for matching and fitting\u003c\/h3\u003e\n\u003cp\u003eNominal impedance is 8 ohms with a 4.5-ohm minimum; sensitivity is 88 dB and the -6 dB range 45 Hz to 50 kHz. Specified amplifier power is 25 to 150 W. QuickDogs secure the speaker after cutting, and the connection is designed for convenient fitting. PMK W6 and BB 6W complete the preparation to check against the wall structure and depth.\u003c\/p\u003e\n\u003cp\u003eSensitivity is 2 dB higher than CWM652. The larger cone, higher power figure and taller opening distinguish CWM663 where the wall can accommodate more radiating area. The 4.5-ohm impedance minimum stays the same, however: when assigning several channels to an amplifier, account for the actual minimum load as well as the nominal figure. The HF switch can be set after the room is furnished. Keep both grilles aligned with the wall finish.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730276541,"sku":"FP29661","price":718.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm663-front-akonc.jpg?v=1790524422"},{"product_id":"diffusori-da-incasso-b-w-ccm362","title":"B\u0026W CCM362","description":"\u003ch2\u003eA compact pair for the ceiling\u003c\/h2\u003e\n\u003cp\u003eCCM362 combines a coaxial two-way layout with shallow mounting.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM362 pair distributes music and film sound from the ceiling without visible conventional loudspeakers. Plan for a 200 mm circular cut-out, a 240 mm outer diameter and 79 mm of depth behind the mounting surface. Its rim projects by about 4 mm. These dimensions matter when choosing positions between joists and services.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 200 mm; frame 240 mm; depth 79 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 160 mm polypropylene bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 5 ohm minimum; power: 80 W handling.\u003c\/li\u003e\n  \u003cli\u003ePMK C6 pre-mount kit; BB 6C back box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSized for flexible coverage\u003c\/h3\u003e\n\u003cp\u003eA 160 mm polypropylene bass\/midrange cone shares an axis with a 25 mm soft-dome tweeter. The coaxial arrangement suits wide-angle listening as people move around the room, rather than a single fixed seat. Compared with CCM382, it needs a smaller opening and uses a 160 mm rather than 200 mm mid\/bass unit.\u003c\/p\u003e\n\u003ch3\u003ePreparing the installation\u003c\/h3\u003e\n\u003cp\u003eNominal impedance is 8 ohms with a 5-ohm minimum, and power handling is 80 W. A 50 Hz to 30 kHz range at -6 dB and 89 dB sensitivity help with system planning. The PMK C6 pre-mount kit and BB 6C back box are specified; check the ceiling void and supporting structure before cutting. Round or square presentation provides a choice for the finished ceiling.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730735293,"sku":"FP32301","price":360.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm362-front-gjhmb.jpg?v=1790524176"},{"product_id":"diffusori-da-incasso-b-w-ccm382","title":"B\u0026W CCM382","description":"\u003ch2\u003eMore radiating area overhead\u003c\/h2\u003e\n\u003cp\u003eCCM382 is the larger coaxial model in the Flexible pair.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM382 pair needs a 249 mm opening per speaker and 85 mm of clearance behind the ceiling. Its outer diameter is 290 mm, a measurement to check against lighting, joists and the rest of the installation plan. The front projects by approximately 4 mm.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 249 mm; frame 290 mm; depth 85 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 200 mm polypropylene bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 5 ohm minimum; power: 80 W handling.\u003c\/li\u003e\n  \u003cli\u003ePMK C8 pre-mount kit; BB 6C back box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStepping up from CCM362\u003c\/h3\u003e\n\u003cp\u003eIts 200 mm polypropylene bass\/midrange driver offers more radiating area than CCM362's 160 mm unit, while retaining a coaxially placed 25 mm soft-dome tweeter. Choose the larger cut-out where wider coverage and greater output are priorities. The -6 dB frequency range begins at 45 Hz, compared with 50 Hz for the smaller model.\u003c\/p\u003e\n\u003ch3\u003eDimensions and system matching\u003c\/h3\u003e\n\u003cp\u003eAt 90 dB sensitivity, 8-ohm nominal impedance and a 5-ohm minimum, CCM382 has 80 W power handling. The quoted upper limit is 30 kHz. PMK C8 is the designated pre-mount kit and BB 6C the listed back box. Position the speakers with the rear clearance and listening area in mind: the coaxial layout supports broad-angle coverage. Round or square presentation can suit the ceiling design.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730768061,"sku":"FP32298","price":486.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm382-front-ffakp.jpg?v=1790524191"},{"product_id":"diffusori-da-incasso-b-w-cwm362","title":"B\u0026W CWM362","description":"\u003ch2\u003eA shallow pair within the wall\u003c\/h2\u003e\n\u003cp\u003eCWM362 is a two-way in-wall speaker with a modest rectangular opening.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM362 pair fits two 275 × 181 mm cut-outs. Each frame measures 315 × 221 mm and occupies 76 mm behind the wall, so check studs, wiring and available clearance before cutting. Its narrow border gives the finished surface a discreet appearance.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 275 × 181 mm; frame 315 × 221 mm; depth 76 mm.\u003c\/li\u003e\n  \u003cli\u003e160 mm polypropylene bass\/midrange and 25 mm soft-dome tweeter.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (5-ohm minimum); 80 W power handling.\u003c\/li\u003e\n  \u003cli\u003ePMK W6 pre-mount kit and BB 6W back box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSimple driver layout\u003c\/h3\u003e\n\u003cp\u003eA 160 mm polypropylene bass\/midrange driver is paired with a 25 mm soft-dome tweeter. The rectangular arrangement distinguishes it from the CCM362 and CCM382 ceiling models; this layout is designed for wall placement. The -6 dB range spans 50 Hz to 30 kHz and sensitivity is 89 dB.\u003c\/p\u003e\n\u003ch3\u003ePreparing both positions\u003c\/h3\u003e\n\u003cp\u003eNominal impedance is 8 ohms, falling to 5 ohms, and power handling is 80 W. PMK W6 is the pre-mount kit and BB 6W the listed back box. Check cut-out dimensions at both positions in the pair and establish mounting height before closing the wall to avoid clashes with other room features.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730800829,"sku":"FP32319","price":360.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm362-front-fccbo.jpg?v=1790524394"},{"product_id":"diffusore-da-incasso-b-w-cwm-7-3-s2","title":"B\u0026W CWM 7.3 S2","description":"\u003ch2\u003eThree ways in-wall with an integral back box\u003c\/h2\u003e\n\u003cp\u003eCWM7.3 S2 uses twin Aerofoil woofers within its own defined enclosure.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM7.3 S2 pair needs two 711 × 251 mm openings. Each frame is 736 × 276 mm and the assembly takes 102 mm behind the surface, projecting 7 mm into the room. With the pre-mount kit the cut-out becomes 715 × 256 mm; select the correct dimensions before working on the panel.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 711 × 251 mm; frame 736 × 276 mm; depth 102 mm.\u003c\/li\u003e\n  \u003cli\u003eTwin 150 mm Aerofoil bass, 100 mm Continuum FST midrange, 25 mm Carbon Dome.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (3.1-ohm minimum); recommended 25–200 W.\u003c\/li\u003e\n  \u003cli\u003eIntegral back box; 715 × 256 mm cut-out with PMK 7.3W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe enclosure is part of the speaker\u003c\/h3\u003e\n\u003cp\u003eThe built-in back box helps reduce sound transfer through the wall and defines loading for the drivers. Two 150 mm Aerofoil Profile woofers work with a 100 mm Continuum FST midrange and 25 mm Carbon Dome tweeter. A glass-reinforced ABS baffle completes the three-way arrangement. CWM7.4 S2 is a narrower 2.5-way design with four 100 mm units instead.\u003c\/p\u003e\n\u003ch3\u003eLoad and planning dimensions\u003c\/h3\u003e\n\u003cp\u003eNominal impedance is 8 ohms with a 3.1-ohm minimum, an important figure for amplifier selection. Recommended power is 25 to 200 W into 8 ohms, sensitivity 90 dB and response 45 Hz to 28 kHz within ±3 dB. The reservoir box measures 460 × 220 mm and net weight is 12.4 kg per unit. Check structural support and the built-in enclosure clearance, not only the visible opening. PMK 7.3W is the specified kit.\u003c\/p\u003e\n\u003cp\u003eThe integral rear reservoir is 460 mm high and 220 mm wide, but those dimensions do not replace the full assembly's 102 mm mounting depth. At 12.4 kg per unit, support in a lightweight wall deserves attention. The speakers can serve stereo or integrated cinema channels, with positions chosen around the listening axis and stud layout. Flowport is part of this three-way acoustic arrangement. Although it shares 90 dB sensitivity with the ceiling-mounted CCM7.3 S2, the wall cut-out here is long and narrow. Its grille projects by 7 mm, so align the visible edge with the wall panels. Allow room for wiring and any pre-mount kit before settling finishes and cabinetry. The 3.1-ohm minimum also calls for an amplifier able to handle that load across the planned channels.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795730964669,"sku":"FP41092","price":3598.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm-7-3-s2-front-leaah.jpg?v=1790526070"},{"product_id":"diffusori-da-incasso-b-w-ccm-8-5d","title":"B\u0026W CCM 8.5D","description":"\u003ch2\u003eA rotatable ceiling-mounted baffle\u003c\/h2\u003e\n\u003cp\u003eCCM8.5D aims both drive units by rotating its mini-baffle.\u003c\/p\u003e\n\u003cp\u003eThe single Bowers \u0026 Wilkins CCM8.5D is an in-ceiling speaker. It needs a square 331 × 331 mm opening beneath a 351 × 351 mm frame. The body is 166 mm deep, while the assembly with BB CCM8.5 back box reaches 177 mm; front protrusion is 8 mm. Check the available void against the actual mounting arrangement.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 331 × 331 mm; frame 351 × 351 mm; depth 166 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 180 mm Continuum bass\/midrange and 25 mm Diamond Dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm nominal; power: 120 W recommended.\u003c\/li\u003e\n  \u003cli\u003erotatable mini-baffle; BB CCM8.5 back box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAiming the complete array\u003c\/h3\u003e\n\u003cp\u003eThe decoupled 25 mm Diamond Dome tweeter uses Nautilus tube loading; the 180 mm Continuum bass\/midrange unit has an anti-resonance plug. Both sit on a rotating aluminium mini-baffle that aims the system towards the listening seats. This differs from CCM models where only the tweeter pivots: the axes of both drive units move. Flowport is part of the acoustic design.\u003c\/p\u003e\n\u003ch3\u003eDimensions and matching\u003c\/h3\u003e\n\u003cp\u003eThe -6 dB range is 35 Hz to 35 kHz, sensitivity 88 dB and nominal impedance 8 ohms. Recommended amplifier power is 120 W. The BB CCM8.5 back box has a 701 × 343 mm frontal envelope: make sure the structure can accommodate it before cutting. With a square frame, alignment to the ceiling architecture also deserves attention.\u003c\/p\u003e\n\u003cp\u003eThe square cut-out describes the speaker opening, but its back box occupies a much wider area behind the surface. Check the whole span between structural members before finalising the ceiling design. The mini-baffle can then be rotated towards the listening area after the frame alignment is chosen. Its Diamond tweeter and Continuum driver remain together on the same adjustable assembly.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795731128509,"sku":"FP39322","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm-8-5d-front-kkkaj.jpg?v=1790524162"},{"product_id":"diffusore-da-incasso-a-parete-b-w-cwm8-3d","title":"B\u0026W CWM8.3D","description":"\u003ch2\u003eA three-way with a changeable orientation\u003c\/h2\u003e\n\u003cp\u003eCWM8.3D rotates its central array for vertical or horizontal placement.\u003c\/p\u003e\n\u003cp\u003eThe single Bowers \u0026 Wilkins CWM8.3D is an in-wall system with an 864 × 238 mm cut-out and 880 × 254 mm frame. The speaker body is 99 mm deep; with BB CWM8.3 back box, total depth from the surface reaches 347 mm. The enclosure extends 1660 mm high and 399 mm wide, so measure this space before fixing studs and openings.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 864 × 238 mm; frame 880 × 254 mm; depth 99 mm.\u003c\/li\u003e\n  \u003cli\u003eTwin 180 mm Aerofoil bass, 130 mm Continuum midrange, 25 mm Diamond Dome.\u003c\/li\u003e\n  \u003cli\u003e8-ohm nominal impedance; recommended 200 W amplification.\u003c\/li\u003e\n  \u003cli\u003eMini-baffle rotates 90°; BB CWM8.3 back box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThree ways and a rotating baffle\u003c\/h3\u003e\n\u003cp\u003eTwo 180 mm Aerofoil woofers, a 130 mm Continuum midrange and 25 mm Diamond Dome tweeter form the system. Its aluminium mini-baffle turns through 90 degrees, permitting vertical or horizontal placement while maintaining the central driver arrangement. The tweeter uses Nautilus tube loading and the architecture includes Flowport. Compared with two-way CWM8.5D, the 8.3D adds a dedicated midrange and second woofer.\u003c\/p\u003e\n\u003ch3\u003eStructure and amplification\u003c\/h3\u003e\n\u003cp\u003eRecommended amplifier power is 200 W, nominal impedance 8 ohms and sensitivity 89 dB. The -6 dB range spans 30 Hz to 35 kHz. Speaker net weight is 10.9 kg before accounting for the back-box structure. Baffle orientation, rear enclosure and mechanical support should be settled together in the wall plan: the front opening alone does not describe the space required for the complete system. Front protrusion is 8 mm.\u003c\/p\u003e\n\u003cp\u003eThe central driver group rotates 90 degrees, keeping tweeter and midrange correctly arranged when the outer frame changes orientation. Do not mistake the 238 mm cut-out width for the whole space required: the rear enclosure extends far beyond the visible surface. Its lower -6 dB point is 30 Hz rather than CWM8.5D's 35 Hz, and recommended amplification rises from 120 to 200 W. At 10.9 kg, the speaker needs firm support. In a wall with studs, services and bracing, reserve the back-box space before locating the grille. Horizontal alignment may suit a position beneath a screen, while vertical alignment can work at its sides; confirm either arrangement against the actual theatre plan. The rotating baffle changes driver alignment, not the need for the full enclosure depth.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795732471997,"sku":"FP39349","price":3780.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm8-3d-front-ebhck.jpg?v=1790524450"},{"product_id":"diffusore-da-parete-b-w-cwm8-5d","title":"B\u0026W CWM8.5D","description":"\u003ch2\u003eDiamond and Continuum within the wall\u003c\/h2\u003e\n\u003cp\u003eCWM8.5D is the two-way Reference in-wall design in a vertical frame.\u003c\/p\u003e\n\u003cp\u003eThe single Bowers \u0026 Wilkins CWM8.5D fits a 395 × 231 mm cut-out beneath a 411 × 247 mm frame. Speaker body depth is 99 mm; BB CWM8.5 back box brings total depth to 347 mm and occupies a 1088 × 347 mm area in the wall plane. Check that complete space well before cutting, especially where studs are close together.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 395 × 231 mm; frame 411 × 247 mm; depth 99 mm.\u003c\/li\u003e\n  \u003cli\u003e180 mm Continuum bass\/midrange and 25 mm Diamond Dome.\u003c\/li\u003e\n  \u003cli\u003e8-ohm nominal impedance; recommended 120 W amplification.\u003c\/li\u003e\n  \u003cli\u003eFlowport and BB CWM8.5 back box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA defined two-way system\u003c\/h3\u003e\n\u003cp\u003eThe 25 mm Diamond Dome tweeter is decoupled and Nautilus tube loaded. A 180 mm Continuum bass\/midrange driver has an anti-resonance plug, and Flowport completes the system. Unlike CWM8.3D, this model has a single bass\/midrange unit and no rotating mini-baffle to change to horizontal alignment. Frame shape and cut-out position therefore matter alongside driver count.\u003c\/p\u003e\n\u003ch3\u003eFigures for the installation\u003c\/h3\u003e\n\u003cp\u003eNominal impedance is 8 ohms, sensitivity 89 dB and recommended amplifier power 120 W, with a -6 dB range of 35 Hz to 35 kHz. Front protrusion is 8 mm and speaker net weight 3.5 kg. Cut-out width describes only part of the space needed: allow for the full back-box envelope, cable route and a wall structure that can support the completed installation.\u003c\/p\u003e\n\u003cp\u003eCWM8.5D does not specify the 90-degree mini-baffle rotation of CWM8.3D. Do not assume the same flexibility for a horizontal location: design opening and system direction for this particular speaker. The comparatively compact face conceals a much larger back box, whose whole volume needs to be reserved. Check the visible 8 mm projection as well as the enclosure clearance.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795732504765,"sku":"FP39330","price":2340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm8-5d-front-jdcpi.jpg?v=1790524465"},{"product_id":"diffusori-da-incasso-b-w-ccm-7-3-s2","title":"B\u0026W CCM 7.3 S2","description":"\u003ch2\u003eA square three-way with its own enclosure\u003c\/h2\u003e\n\u003cp\u003eCCM7.3 S2 brings four drive units and an integral back box into the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM7.3 S2 pair needs two square 332 × 332 mm cut-outs, or 335 × 335 mm with the pre-mount kit. The frame is 355 × 355 mm, the cabinet depth 194.5 mm and front protrusion 8 mm. A diameter is not the key dimension here: measure width, height and enough clear depth for the speaker and its integrated enclosure.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 332 × 332 mm; frame 355 × 355 mm; depth 194.5 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: two 130 mm Aerofoil bass drivers, 100 mm Continuum FST midrange and 25 mm Carbon Dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 3.1 ohm minimum; power: 25–200 W recommended.\u003c\/li\u003e\n  \u003cli\u003eintegrated back box; 335 × 335 mm cut-out with PMK 7C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThree ways for theatre and stereo\u003c\/h3\u003e\n\u003cp\u003eTwo 130 mm Aerofoil Profile bass units work with a 100 mm Continuum FST midrange and 25 mm Carbon Dome tweeter. The integral back box reduces sound transfer to adjacent spaces and defines the acoustic loading, making the installation more predictable. This is a three-way layout, unlike the two-way CCM7.5 S2 with its single angled bass\/midrange driver. The square frame also aligns naturally with room geometry.\u003c\/p\u003e\n\u003ch3\u003eMatching and dimensional checks\u003c\/h3\u003e\n\u003cp\u003eSensitivity is 90 dB. Nominal impedance is 8 ohms with a 3.1-ohm minimum, a significant figure for amplifier choice. Recommended power is 25 to 200 W into 8 ohms on unclipped programme. Response is 55 Hz to 28 kHz within ±3 dB; the -6 dB points are 52 Hz and 33 kHz. PMK 7C is the specified kit. Check the difference between standard and kit cut-outs before cutting. Net weight including accessories is 9 kg per speaker.\u003c\/p\u003e\n\u003cp\u003eThe built-in back box makes the acoustic loading less dependent on the free volume above the ceiling and helps contain sound reaching the room above. Structural support, wiring and the mechanical load of each unit still need checking. At 194.5 mm, depth is substantially greater than CCM7.5 S2's 128 mm; a void that accepts the latter will not necessarily fit the three-way. The square shape also demands careful edge alignment. In a cinema room, its three-way layout can be considered across multiple positions while keeping listening geometry consistent. Plan the openings and support before finishing the ceiling surface.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795738075325,"sku":"FP41084","price":3780.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm-7-3-s2-front-cjhof.jpg?v=1790526008"},{"product_id":"diffusori-da-incasso-b-w-ccm-7-5-s2","title":"B\u0026W CCM 7.5 S2","description":"\u003ch2\u003eAn angled array aimed towards listeners\u003c\/h2\u003e\n\u003cp\u003eCCM7.5 S2 tilts the whole drive-unit arrangement relative to the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM7.5 S2 pair fits 254 mm circular openings beneath 290 mm outer frames. Allow 128 mm behind the panel; the grille protrudes by 8.5 mm. Its acoustic assembly is angled to the mounting plane, so orientation should be decided when the speakers are laid out, as it directs output towards the audience.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 254 mm; frame 290 mm; depth 128 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 180 mm angled Continuum bass\/midrange and 25 mm Carbon Dome tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.8 ohm minimum; power: 25–150 W recommended.\u003c\/li\u003e\n  \u003cli\u003eQuickDogs; round grille supplied, square GR68SQ optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChannels in a discreet cinema\u003c\/h3\u003e\n\u003cp\u003eA 180 mm Continuum bass\/midrange cone works with a 25 mm Carbon Dome tweeter. The pair can serve left, centre, right or rear roles in a discreet cinema system when positions and aiming are designed for each channel. QuickDogs assist fitting. A round grille is supplied; square GR68SQ is the optional alternative. Unlike CCM7.3 S2, this is not the three-way layout with twin woofers and an integral back box.\u003c\/p\u003e\n\u003ch3\u003eElectrical figures and accessories\u003c\/h3\u003e\n\u003cp\u003eSensitivity is 90 dB, nominal impedance 8 ohms with a 4.8-ohm minimum, and recommended amplification 25 to 150 W into 8 ohms. Response is quoted at 32 Hz to 28 kHz within ±3 dB, with -6 dB points at 25 Hz and 33 kHz. PMK C8 and BB 6C back box are listed. Check the rear clearance and angle of the array before securing the speaker: cut-out position also determines where its sound can be aimed.\u003c\/p\u003e\n\u003cp\u003eThe angled bass\/midrange unit is different from mounting a straight-down speaker and correcting only its tweeter. Consider the orientation in the opening alongside the seating plan. At 128 mm, mounting depth is less than CCM7.3 S2's, but its 254 mm cut-out diameter remains a specific constraint. Select round or optional square grille to suit the finished ceiling without changing the acoustic aiming plan.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795738108093,"sku":"FP41114","price":1980.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm-7-5-s2-front-negpb.jpg?v=1790526043"},{"product_id":"diffusore-da-soffitto-b-w-ccm-632","title":"B\u0026W CCM 632","description":"\u003ch2\u003eOne driver and a small opening\u003c\/h2\u003e\n\u003cp\u003eCCM632 fits ceiling positions that leave little room for a conventional two-way design.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM632 pair uses a single full-range driver in each ceiling speaker. Each position requires a 120 mm circular cut-out and 100 mm of depth behind the panel; the round frame is 147 mm across and protrudes by 5.5 mm. These dimensions suit discreet points of sound or multiple speakers spread through a space, provided the ceiling void has been measured first.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 120 mm; frame 147 mm; depth 100 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 75 mm black glass-fibre full-range driver.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 5 ohm minimum; power: 10–60 W recommended.\u003c\/li\u003e\n  \u003cli\u003eintegral enclosure; PMK C3; round and square magnetic grilles included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA different driver approach\u003c\/h3\u003e\n\u003cp\u003eThe 75 mm glass-fibre cone avoids placing a tweeter in front of a very small bass\/midrange unit. That distinguishes CCM632 from the coaxial two-way CCM362 and CCM382, which need much larger openings. Its -6 dB range is 100 Hz to 17 kHz; consider the complete system where substantial bass output is required. Sensitivity is 84 dB.\u003c\/p\u003e\n\u003ch3\u003eGrilles and fixing\u003c\/h3\u003e\n\u003cp\u003eAn integral enclosure on each unit helps limit sound transfer into neighbouring spaces. ZipDogs fixings accommodate different panel thicknesses. Round and square grille and bezel assemblies are supplied, attach magnetically and can be customised. Choose the visible shape before finishing the ceiling. Nominal impedance is 8 ohms, with a 5-ohm minimum, and recommended amplifier power is 10 to 60 W. PMK C3 is listed for pre-mounting.\u003c\/p\u003e\n\u003cp\u003eSeveral CCM632 positions can provide distributed sound where one larger speaker would be too conspicuous. A small cut-out does not mean negligible mounting depth: the integral enclosure still occupies 100 mm behind the panel. Check the front opening as well as services and structural obstructions in the void.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795738140861,"sku":"FP37613","price":502.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm-632-front-klobf.jpg?v=1790524146"},{"product_id":"diffusore-a-2-vie-da-soffitto-b-w-ccm663rd","title":"B\u0026W CCM663RD","description":"\u003ch2\u003eDepth changes the installation\u003c\/h2\u003e\n\u003cp\u003eCCM663RD retains the CCM663 cut-out but needs only 92 mm behind the ceiling.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM663RD pair addresses a particular constraint: each speaker needs a 202 mm opening but only 92 mm of depth behind the surface, against 133 mm for standard CCM663. The frame is 240 mm across and projects by 7 mm. RD means Reduced Depth; a shallower cone and revised QuickDogs frame make it suitable for tighter voids.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 202 mm; frame 240 mm; depth 92 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 150 mm Aramid Fibre bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.8 ohm minimum; power: 25–100 W recommended.\u003c\/li\u003e\n  \u003cli\u003epivoting tweeter; three-position EQ; optional square CCM663 grille\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDirecting the treble\u003c\/h3\u003e\n\u003cp\u003eThe 150 mm bass\/midrange driver has an Aramid Fibre cone, and the 25 mm Nautilus aluminium-dome tweeter pivots to aim towards listeners. A three-position EQ control further refines off-axis output. A round grille is supplied; a square CCM663 grille is optional. Its visible shape can be chosen as the ceiling design is finalised.\u003c\/p\u003e\n\u003ch3\u003eChecks before cutting\u003c\/h3\u003e\n\u003cp\u003eRecommended amplification is 25 to 100 W, nominal impedance 8 ohms with a 4.8-ohm minimum, and sensitivity 86 dB. The -6 dB range is 35 Hz to 50 kHz. PMK C6 and BB6W or BB125C back boxes are listed. Reduced mounting depth does not reduce the cut-out diameter: measure both dimensions and ensure there is access to wiring in the actual void.\u003c\/p\u003e\n\u003cp\u003eIts front projects further than standard CCM663 despite the reduced rear depth: 7 mm rather than 4 mm on the room side. That distinction matters where panel thickness and the visible grille line are as important as the cavity. The 4.8-ohm impedance minimum should also be taken into account when specifying the amplifier. Choose the square grille only if the ceiling design calls for it.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":41795738173629,"sku":"FP37915","price":999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm663rd-front-mdbeg.jpg?v=1790524233"},{"product_id":"b-w-ccm682","title":"B\u0026W CCM682","description":"\u003ch2\u003eA 200 mm driver with aimable treble\u003c\/h2\u003e\n\u003cp\u003eCCM682 combines a large bass\/midrange unit with ceiling coverage controls.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM682 pair needs two 250 mm openings. Each 290 mm frame extends 133 mm behind the ceiling and projects 4 mm at the front. The cut-out is larger than the 202 mm required by the 150 mm CCM66x models, so account for lighting and structural elements at the drawing stage.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 250 mm; frame 290 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 200 mm Aramid Fibre bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–150 W recommended.\u003c\/li\u003e\n  \u003cli\u003epivoting tweeter; three-position EQ; die-cast chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrivers and adjustments\u003c\/h3\u003e\n\u003cp\u003eThe 200 mm Aramid Fibre cone sits in a die-cast chassis. A 25 mm Nautilus aluminium-dome tweeter pivots to direct high frequencies, while three-position EQ offers another off-axis adjustment. A 30 mm coil and 100 mm magnet further distinguish the bass\/midrange unit. CCM683 shares its cone diameter and mounting dimensions, but has a lower recommended upper amplifier power of 130 W rather than 150 W.\u003c\/p\u003e\n\u003ch3\u003eMatching figures\u003c\/h3\u003e\n\u003cp\u003eSensitivity is 89 dB, nominal impedance 8 ohms with a 4.5-ohm minimum, and recommended power 25 to 150 W. The -6 dB range covers 35 Hz to 50 kHz. QuickDogs and a convenient connection aid fitting. A C8 pre-mount kit and 6C back box are listed. The pivoting tweeter is valuable when the ceiling grid, rather than exact seating positions, determines the openings.\u003c\/p\u003e\n\u003cp\u003eIts 89 dB sensitivity is 1 dB higher than CCM683 and CCM684, despite their shared outer dimensions. The models should not be treated as identical merely because they fit the same cut-out: driver design, power limit and response adjustments all affect selection. Leave room to aim the tweeter after fitting and keep the three-position control accessible while evaluating the final listening positions.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":56729124634968,"sku":"FP29629","price":1258.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm682-front-adnja.jpg?v=1790524302"},{"product_id":"b-w-ccm683","title":"B\u0026W CCM683","description":"\u003ch2\u003eLarge cone, adjustable high frequencies\u003c\/h2\u003e\n\u003cp\u003eCCM683 puts a 200 mm bass\/midrange driver in a ceiling frame.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CCM683 pair is designed for in-ceiling fitting. Each speaker needs a 250 mm circular cut-out and 133 mm of clear depth; the outer frame is 290 mm across and projects by 4 mm. Compare opening and void dimensions carefully where joists, ducts or downlights limit the available position.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 250 mm; frame 290 mm; depth 133 mm.\u003c\/li\u003e\n  \u003cli\u003eDrive units: 200 mm Aramid Fibre bass\/midrange and 25 mm Nautilus aluminium tweeter.\u003c\/li\u003e\n  \u003cli\u003eImpedance: 8 ohm, 4.5 ohm minimum; power: 25–130 W recommended.\u003c\/li\u003e\n  \u003cli\u003epivoting tweeter; three-position EQ; die-cast chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAiming after fitting\u003c\/h3\u003e\n\u003cp\u003eA 200 mm Aramid Fibre bass\/midrange cone is paired with a 25 mm Nautilus aluminium dome. Its tweeter housing pivots to alter treble direction, and three-position EQ adjusts off-axis response. The die-cast chassis stiffens the assembly. With the same opening size, CCM684 instead uses a glass-fibre cone and soft dome; CCM683 has the Aramid Fibre and aluminium combination.\u003c\/p\u003e\n\u003ch3\u003eElectrical checks\u003c\/h3\u003e\n\u003cp\u003eRecommended amplifier power is 25 to 130 W. Sensitivity of 88 dB and 8-ohm nominal impedance, with a 4.5-ohm minimum, guide matching; the -6 dB range is 35 Hz to 50 kHz. A C8 pre-mount kit and 6C back box are specified. Once the openings are marked, consider the seating positions: the pivoting tweeter and EQ can be adjusted for that geometry.\u003c\/p\u003e\n\u003cp\u003eComparison with CCM682 reveals another concrete difference: CCM683 has 88 dB sensitivity, while CCM682 reaches 89 dB and has a 150 W upper recommended power figure. Their outside dimensions remain the same. If the project already specifies 250 mm openings, these choices concern system matching rather than panel fabrication. Aiming and EQ still allow the installed treble to be tuned.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":56729506316632,"sku":"FP29637","price":952.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-ccm683-front-lfkic.jpg?v=1790524317"},{"product_id":"b-w-cwm7-4-s2","title":"B\u0026W CWM7.4 S2","description":"\u003ch2\u003eA tall, narrow cinema channel\u003c\/h2\u003e\n\u003cp\u003eCWM7.4 S2 arranges four 100 mm drivers around a Carbon Dome tweeter.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM7.4 S2 pair fits 599 × 149 mm cut-outs. The frame is 625 × 175 mm, requires 92.5 mm behind the wall and projects by 8 mm. The opening's 149 mm width makes it useful beside a screen where a wider speaker may be difficult to place.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 599 × 149 mm; frame 625 × 175 mm; depth 92.5 mm.\u003c\/li\u003e\n  \u003cli\u003eTwin 100 mm Continuum mid\/bass, twin 100 mm Aramid Fibre\/paper bass, 25 mm Carbon Dome.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (4.9-ohm minimum); recommended 25–150 W.\u003c\/li\u003e\n  \u003cli\u003e2.5-way system; QuickDogs and PMK CWMC7.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA 2.5-way front-channel layout\u003c\/h3\u003e\n\u003cp\u003eThe 25 mm Carbon Dome tweeter works with two 100 mm Continuum mid\/bass units and two 100 mm Aramid Fibre\/paper bass cones. It can sit beside, above or below a screen as left, centre or right channel with position and orientation planned accordingly. QuickDogs assist fitting. Compared with CWM7.5 S2, this model uses more drivers in a much taller frame.\u003c\/p\u003e\n\u003ch3\u003ePower and fitting\u003c\/h3\u003e\n\u003cp\u003eSensitivity is 86 dB, nominal impedance 8 ohms with a 4.9-ohm minimum, and recommended power 25 to 150 W into 8 ohms. Response is 45 Hz to 28 kHz within ±3 dB. PMK CWMC7 is the pre-mount kit. Keep the full 92.5 mm behind the panel clear along the chassis height; check studs, wiring and screen position before finalising the front channels.\u003c\/p\u003e\n\u003cp\u003eAt almost 600 mm, the cut-out height needs a continuous wall section without blocking noggins or services. Its narrow width helps integration beside the projection screen. For a centre channel, consider placement above or below the image together with speaker orientation; the full frame dimensions determine the real clearance to visible edges. Its five drive units make this a very different layout from the smaller CWM7.5 S2.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":56730559676760,"sku":"FP41033","price":1890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm7-4-s2-front-edepo.jpg?v=1790526095"},{"product_id":"b-w-cwm7-5-s2","title":"B\u0026W CWM7.5 S2","description":"\u003ch2\u003eA two-way with its own rear volume\u003c\/h2\u003e\n\u003cp\u003eCWM7.5 S2 puts a forward-facing Flowport and integral back box in a compact frame.\u003c\/p\u003e\n\u003cp\u003eThe Bowers \u0026 Wilkins CWM7.5 S2 pair needs 331 × 187 mm openings, with each frame measuring 356 × 212 mm. It takes 102 mm behind the wall and projects by 8 mm. If using the pre-mount kit, the cut-out becomes 336 × 192 mm; decide which set of dimensions applies before preparing the structure.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out 331 × 187 mm; frame 356 × 212 mm; depth 102 mm.\u003c\/li\u003e\n  \u003cli\u003e130 mm Continuum bass\/midrange and 25 mm Carbon Dome.\u003c\/li\u003e\n  \u003cli\u003e8-ohm impedance (3.8-ohm minimum); recommended 25–150 W.\u003c\/li\u003e\n  \u003cli\u003eFront Flowport; integral back box; 336 × 192 mm cut-out with PMK 7.5W.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStereo, multiroom or rear channel\u003c\/h3\u003e\n\u003cp\u003eA 130 mm Continuum bass\/midrange driver and 25 mm Carbon Dome tweeter form the two-way. The front-firing Flowport works with an integral back box that helps contain sound transfer between rooms. It can serve stereo, multiroom or a rear cinema channel. The taller, narrower CWM7.4 S2 instead uses four 100 mm units in a 2.5-way arrangement.\u003c\/p\u003e\n\u003ch3\u003eSpace beyond the opening\u003c\/h3\u003e\n\u003cp\u003eThe rear enclosure measures 385 × 181 mm: check its clearance as well as the visible cut. Nominal impedance is 8 ohms with a 3.8-ohm minimum; sensitivity is 86 dB and recommended power 25 to 150 W into 8 ohms. Response is 45 Hz to 28 kHz within ±3 dB. PMK 7.5W is the specified kit. For the pair, opening alignment and distance from internal structure matter as much as the listening position.\u003c\/p\u003e\n\u003cp\u003eSensitivity matches CWM7.4 S2 at 86 dB, but the minimum impedance falls to 3.8 ohms rather than 4.9 ohms. That affects amplifier selection if different models share a cinema system. Standard and pre-mount-kit openings are not interchangeable: mark the panel to the dimensions of the actual configuration. Keep the front Flowport unobstructed when placing the speaker near furniture or trim.\u003c\/p\u003e\n","brand":"B\u0026W","offers":[{"title":"Default Title","offer_id":56730578092376,"sku":"FP41106","price":1530.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/bowers-wilkins-cwm7-5-s2-front-cpdfe.jpg?v=1790526110"}],"url":"https:\/\/videosell.fr\/collections\/diffusori-da-incasso-bowers-wilkins.oembed","provider":"Videosell store","version":"1.0","type":"link"}